Counting matching models…
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
Heyho I really haven't found a 100% satisfactory solution yet to keep my cordless screwdriver in continuous operation. (Mine doesn't have a factory fitted locking function for this and Velcro wears out quickly) Today I designed this…
Last Updated on 28/03/2020 JJ/MM/AAAA -added STEP -added hexagonal base for the screw This is a scew on fiting for cables, ranging from 5 to 13mm. The nut is 28mm wide Be carful with your settings, especialy horizontal expantion (for me…
Simple LTT Screwdriver holder for Multiboard
I bought for my kid the “Smoby - Black+Decker - Etabli Bricolo Center” which uses 20 of the "92 Accessoires" as mandatory use for mounting it. I took it as a challenge to recreate the screws & nuts so that my son could use the ones meant…
Organizer for drill bits, screw bits, or other cylindrical items, based on Gridfinity. I made the dividers in two different depths for each length. 5mm and 9mm deep, where the 9mm matches the Dymo Omega Embosser (9mm). Printed i PLA on a…
This was created as a way to use a single expansion port of a framework laptop to have a portable screwdriver using the framework screwdriver bit. It can use a 4mm x 2mm magnet to ensure the bit stays in place. The will use a bit of CA…
Precision screwdriver description: I didn't like the way most precision screwdriver felt (especially the end cap) so I made my own with a ball beared end cap using a 687 Bearing. I like the upper part of the LTT precision screwdriver,…
Mounts for the regular LTT screwdriver and the precision screwdriver. Easy to grab, easy to return, hard to fall off on its own. Low material usage and footprint. Both designs require an empty insert If the stubby selection ring and shaft…
Created a case to hold the LTT Stubby Screwdriver together with up to 36 extra bits. There are also versions to hold the Extension and one to Hold the Extension + LTT Pen. You will require 8 m3x20mm machine screws
I needed to hang my camera from a under shelf that holds my filaments over the printer. I remixed this base to strengthen the base (thicker) and placed some screw holes. Thanks for the original designer.
Nice snug fit compared to generic screwdriver holders. Works with LTT Precision Screwdriver. Linus Tech Tips Screwdriver. Modified from Mikhail design to work with Multiboard.
I was inspired by a lot of print-designers at printables.com , and see some good stuff with a lot of detail what was the trigger to design this carousel. Original it is made for the WERA kraftform micro screwdrivers, but if you think…
so my tank doesn't evaporate like crazy
A simple screw and bitholder you can attach to a Einhell screwdriver using a M4*20mm screw. You have to pause the print at a certain layerheight and put 3-4 Neodym 10*3mm Magnets in.
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) TRAVELLER SCREW CAP BOX –…
Gridfinity bin for the LTT Screwdriver with space for the extra bits
This screw is a remake of the original one that is supposed to come with the light shades, we bought multiple ones but for some reason one of the shades didn't come with one, instead of going back to the store i picked up the calipers and…
A screwdriver holder for HSW with a loop of 15mm
Now you can sort the screws directly into practical bins! Use my d3 bins (d2 wave can be used for 40 & 35 mm slots) to keep them separated. I found that the upstream handle caused binding, so I recommend using the “contour grip” instead…
A gridfinity holder for a picquic screwdriver. I have a sixpack plus, but I'm sure it will work with other models. It's not super refined, but it works well enough. I have included the freecad files for it, if you want to edit it.
ryobi quick turn screwdriver Bitsholder for ryobi quick turn screwdriver One model have 8x3 magnets embedded inside ( Do the layer change at 21 layer ( 4.20 mm ) ) And there is a "standard" model that dont use magnets Update: There was a…
Overview This precision screwdriver is designed to fit standard 4mm bits. A bit holder is located inside the handle, allowing you to neatly store 6 additional bits. The handle is 20mm in diameter and has a rotating end cap. Please note…
The lid compresses onto the edges of the PCB, holding the Pi safely in place. Two sliding clips hold the lid in place. The case comes with openings for all ports and the top can be modified to expose the GPIO. Should fit most models…
This simple and easy to print screwdriver will help you for installing and removing you USS drybox.
A Gridfinity holder for a cheap generic precision screwdriver i got from aliexpress.
this is testing/calibrating screw. i hope it will help u calibrate
Screw Sorter M4: This screw sorter allows quick sorting of M4 screws by dropping them into the corresponding small boxes. The screws are then accessible through the 5 openings in the large wooden box. The screw sorter measures 30 cm by 10…
Print with at least 3 perimeters and 20% infill.
I was not happy with the original 'clip in' mount of the LED strip mounting arm, so I remix the arm that its screwable with a 12mm DIN 912 M3 screw and a normal M3 nut. I just uploaded the remixed arm, if you also need the other parts,…
My unofficial wall mount for the LTT Store Screwdriver
Tiny labels for your mini Wera screwdrivers. I use them with the metric hex set and store in a Gridfinity stand next to my printer. Attach with a tiny dot of hot glue. I had the best luck printing text side up with a brim. Hex set:…
Hook with hiddeb screw. Print: Layers: 0.2 Perimeters: 4 Infill: 20% gyroid Material: PLA, PetG, ABS, ASA
Simply align the screw with the corresponding increment you would like to test the tolerance of. Then just twist the screw and see if you need a tighter or looser fit. Hope this little guide helps!
This is designed to use ¼" shank bits by epoxy gluing them into the handle. You can print a bunch of them and glue in different types and sizes of bits to each one, or do what I did and print just one and glue in a magnetic bit holder.…
This is a remix of the insert for @RdeBrouwer_2049195's https://www.printables.com/model/937862-gridfinity-precision-screwdriver-set-draper. This insert allows for slightly larger screwdrivers. The end rests have moved 10mm further away…
Modification of side mount of original by just adding 2 grooves and imprint “multi version”. Looks funny because I had to switch to another colour midprint. Also made rubber feet from TPU 60A (Recreus Filaflex).
If you have bought an Anet A8 or any laser cutter in the late 2010s, you probably got one of these infamous yellow reversible screwdrivers. I didn't even know it was reversible for the longest time and kinda forgot about it till I…
There are several LED strip adaptions for the Maker Lamp but I wanted something that is mounted securely but can be removed, if necessary. I've created this screwable “socket”. It fits the narrow 7.2 mm LED strips. I've included the…
I use a pelican case for my framework laptop. I wanted to include the screwdriver. May work with other pelican cases but idk. I pulled out 11 cubes of foam to fit. I printed it in TPU to make it flexy but you might be able to use other…
ratcheting screwdriver without the ltt logo. i used tree supports for the whole model. use 100% infill for the ratchet and the bit holder. turn on detect thin walls so that the bit holder and the ratchet print correctly because otherwise…
When I recieved my Xiaomi Wowstick a few years ago, there was no diffuser for the led lights installed and recently, I decided to change that fact. So here it is - simple light diffuser for the wowstick. Enjoy!
Holds the LTT Precision Screwdriver at a nice angle for easy use. Designed to mount on a desk/shelf with a small screw. Print Settings Rafts: No Supports: Yes **Resolution:** 0.2mm Infill: 15% **Filament Material:** PLA Category: Tool…
The handle will require supports, as it's best to print horizontally. I recommend a higher infill on the bit as well. Any layer thickness works. @JudahChang_579681 Cardboard Screws are the best I've used.
English Pixie Crew brand pixels compatible pad in various sizes: 6x6, 8x8, 10x10, 12x12, 6x12 I made these for my kids because we had some leftover pixels / studs. This brand makes special pencil cases, school bags that have silicone pads…
This is a slight modification to Jonas Grimstad's electric screwdriver holder. I noticed the original tool holder was a lot longer than it needed to be so I used the extra space to add a magnetizer/demagnetizer. Can be printed with PLA…
A home for your Ryobi HP54L 4v Screwdriver and its to best bit buddies. They can all now hang out on a multiboard near you.
Simple toilet paper roll holder with a phone shelf that uses a separate mounting bracket to hide the screws. Designed with optimal layer orientation for 3D printing to ensure the roll holder part is less likely to snap off (layer lines…
Let me introduce you to my modular parkside pbspa 12 cordless screwdriver workstation. Any part can be printed separately and then joined together. There is no need any support with printing.
Gridfinity holder for Wera Kraftform Micro Electronics Precision Screwdrivers. The holder is sized so that even the longest screwdrivers in the Wera 05073675001 Kraftform Micro-Set/12 Sb 1 Screwdriver Set will fit. Not sure about drivers…
Many RV (caravans, campers, trailers) have a bumper made of a heavy steel square tube. If you put a cover on it which is easy to put on and remove, you can store stuff inside the bumper. These bumpers are usually 6 ft / 2m long, so you…
I wanted a minimalist design that keeps the filament off of the z-screw, but also avoids any drag on the line. Print Settings Rafts: No Supports: No **Resolution:** .2 Infill: 40% **Filament:** generic PLA any Notes: The filament should…
Screw Tray / Organizer A set of 6 screw trays/organizers for your screws. Ideal for printer repair, iphone repair, furniture assembly and other assembly needs. Feel free to remix this design to suit your needs. If you have any questions…
It's a small tray for computer screws and similar screws
Screw Tray / Organizer (different pocket sizes) Screw trays/organizers for your screws. Ideal for printer repair, iphone repair, furniture assembly and other assembly needs. This model has a selection of pocket sizes Feel free to remix…
One of these bowls will hold the 180 stones of one color for your go game. Nothing pretty, but they get the job done. Screw lid for storage. If you are using the OpenSCAD file, please see this note from der_da : The file is using the…
A simple tool for field assembly of all RC models that take nylon M6 screws to hold its parts together. Designed for my Multiplex Lentus for attaching horizontal stabilizer. Small size makes it ideal to leave in transmitter case to have…
This screw tray was designed to collect the screws when taking electronics apart ;) It's a bit higher (22mm tray inside) to keep a decent amount of them. The rounded edge on the inside is to get the screws out easier. At the bottom of the…
Print the legs lying down. No supports necessary If you want to use an MMU and print the colored hexagons accents. Assemble with glue if you like.
Is it a screw? Is it a vase? Is it a cup? You decide! A multi purpose cup / vase, modeled after an M64 hex head bold with a fitting nut. The perfect home decor for your maker space! Screw and nut are separate pieces and fully functional,…
In the original design of this holder, the tool is held with the center of gravity much higher than the top of the model. This forced the top of the handle (as seen in the picture) to be unstable and tip outward (not shown in the…
A BentoBox remix that is half snap, half screw. With carbon pads rather then carbon pallets, to keep the mess minimum. Needed Hardware: 8x Din912 M3*10 7x m3 threated insert 2x 4010 fan Hepa filter Carbon pad Print instructions: Print in…
I've been using good old nails to organize torque wrenches on my barn's wall, but when I got this torque screwdriver things started to get fancier.
A minimalist tray for Vessel Ball Grip 220USB Electric Screwdrivers. Spaces for extra bits or bit adapters.
The drawback of this arm is that the screw securing the arms can break. I have designed a replacement for this screw.
I wanted a gradual curve for my filament to take when going into my enclosure so I whipped this up to make it happen! It puts the fitting at a 14cm height. For this to work you need a PC4-M10 (black tip), a bit of PTFE tubing, and some #8…
I've been using this filter for ages now, and completely forgot to upload the remix I realy like The Filter, but not the lid, as it's a PITA to keep in place as is. So I added locations for 2 threaded inserts and corresponding holes in…
Instructions: (I printed the pictured model in “Lila” colored pla with build plate supports and brim. I used defaults but I could recommend increasing the claw infill to make it a bit more solid) The ‘extender’ goes through the ‘screw…
Screw trays, stackable with 6 or 8 compartments. Handy for electronics disassembly
Contenitore x chiavi a brugola o pure cacciaviti lunghi con fori profondi 25mm stampato in PETG
I created a model of this handle to replace a broken handle in my toolbox. You need 2x ϕ3mm pins to assembly it.
Aqara mount models from @volan are not suitable for screw mounting which is necessary for some wall types. When I tried to use hole in original base for screw, it break off very easily when adjusting the sensor. This is simple remix of…
I designed this for our machine shop. We rotating carbide indexable tooling and this holder is very convenient. Holds a full set of wiha t6-t25 and 6ip to 25ip. The T20 and T25 are the T handle ones, rest are screwdriver style. Attach to…
This is a remix of the Hoto Electric Screwdriver Gridfinity by ethanthompson here on Printables. I needed a box to fit the Paintron Electric Screwdriver from Amazon. I used PrusaSlicer's cut tool to chop the original up and overlay the…
Bit holder box that is designed to hold 10 standard 2.5 inch 60mm long screwdriver bits. Lid closes with two indents and can be opened by pulling. The bits are loose fit inside the holder. A lanyard hole is provided for portability. I…
T-Nuts and Knobs for M6 Screws to Fix it on the BOSCH Table Saw - GTS 635-216 Professional
Fits Gift cards and more! Prints with NO SUPPORTS! High capacity secret stash or gift box. Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Want to sell this? → Grab a commercial license on my Club! Only $20/month cancel…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes Recommended Print Support Type: Tree Print Duration: 1h 40m Additional parts…
A bench top stand for a Worx WX240L Cordless Screwdriver and the included bits. .4mm nozzle .3 mm layer height, I used paint on supports in the section for the screwdriver and manually changed the "Pattern Angle" so they would run…
After digging through my set of different bolt and screw containers, I decided enough was enough and designed a quick and simply storage shelf for the boxes. Model is pretty thin and designed to use as little filament as possible while…
tisknu na stojato s 5 perimetry a výškou vrstvy 0,15 - PC Blend, ale v nouzi bude fungovat každý materiál. I print standing up with 5 perimeters and a layer height of 0.15 - PC Blend, but any material will work in a pinch.
Mounts for the regular LTT screwdriver and the precision screwdriver. Easy to grab, easy to return, hard to fall off on its own. Low material usage and footprint. Both designs require an empty insert If the stubby selection ring and shaft…
just a screw on container Made in tinkercad, print with 20% infill or more, i recommend 3d honeycomb 0.2mm layer height Slow down on overhangs is good to be enabled
I needed some M6 thumbscrews and didn't like any of the existing designs so I created my own. It covers the top of a hexagonal M6 screw turning it into a thumb screw. Consists of 2 parts - the main body and a cover that is friction-fit at…
I printed @ .12mm layer height and it avoided any overhang issues, you can then just print as normal. I suspect a .2mm layer height would work as well, but I have not tested that. I just had standard #8 (~4mm metric) diameter flat head…
A MAkita MBOX inlay for a Bosch Pro electric screwdriver / drill
Side hook for IKEA BROGRUND towel holder. You will need one M3 square nut and one M3x12 screw . Printed in Petg with a solid part where the screw is inserted (as shown in the .3mf file).
This is a No-Screw mail box to be mounted with 3M velcro command strip, link to purchase the strip here
I wanted a better box for storing screws! And I'm really pleased with this set - the result of a somewhat obsessive design process - they are great for screws but also useful for all sorts of other things as well. When you buy screws here…
-Parts List: M3 Screw (atleast 16mm long) M3 Nut (can also be replaced with a threaded insert) Plastic Glue -Assembly: Put some grease on the shaft then put one half of the knob on the shaft so it slots in and can rotate freely then glue…
This is remix on hook for tape for direct mount to the wall, no extra elements needed.
A Google Home Mount remix to mount to the edge of a shelf. One version with a lip to align with 18mm (5/8") shelving. One version flat on the back for assorted applications. Edit: Lip version fits Shelf Edge Cap print.
A Wiha Picofinish driver holder for the Multiboard Mounting System remixed from @S_T_A_R_K_E_159558 's skadis version. The Onshape file can be copied and edited here , but if you go this way, I would still appreciate a download and a like…
update: I just found an existing model in Scale I and II - obviously I previously did not find the proper search words. Still, that model is not functional (no threads) - see my " railway stuff " collection. I don't think a thread for…
