1 / 4
Quickly Measure & Sort M2, M3, M4, & M5 Metric Screws up to 50mm Long — image 1
1 / 4

Quickly Measure & Sort M2, M3, M4, & M5 Metric Screws up to 50mm Long

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€2.17 – €2.65 net (excluding VAT)

For file: c1_c2_15_pla_universal_1_04_015mm_pla_mk3smmu2s.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.41 excluding VAT (range midpoint).

Weight reported by the author
21 g
Print time reported by the author
2.85 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Over the years, I have accumulated boxes of random screws that I was too lazy to sort.

Rating
4.958 / 5
Likes
913
Downloads
4,402
Makes
81
Views
35,216
Reviews
72

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting process.

In the center of the Tool is a V-slot and metric ruler. Just lay the screw in there, set the screw head flush, and use the metric reference on the ruler. Markings are 2mm apart. This tool can measure screws up to 50mm or longer if you're clever ;)

On the left side of the tool are four heat inserts for checking threads M2-M5 ( I used these heat inserts: https://amzn.to/34yWUIv). The design could be easily modified for whatever type of heat inserts you want to use. I am including the STEP file for anyone needing to modify the holes. The heat insert depth I used is 6mm; after that, the holes open up to make room for any excess melted plastic. It can be challenging to get the heat insert in and keep the excess plastic out of the way of the threads. I’ve found putting a screw through while the heat insert is still hot allows you to align the heat insert and push excess plastic out of the way.

Print instructions

The uploaded photo with the two-color print was a single STL modified in PrusaSlicer using modifier slabs. In addition to the STL, I have also uploaded the two-color 3MF project file in case someone wants to print in multiple colors. I also included GCODE for the Prusa MK3S/MMU2S using PLA in 1 and 2.

Tags