Counting matching models…
This is the 7th and current design of my 4-beat note tray to hold the music note duration manipulative pieces found here: https://www.printables.com/model/615947-music-note-duration-manipulatives The design has been tested extensively…
Measure device for Bambulab 1kg filament spool single color Print from bambulab PLA BASIC. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check th multicolor version!
Measure device for Bambulab 1kg filament spool MULTI color Print from bambulab PLA BASIC. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check the single color version!
Measure device for AURAPOL 1kg filament spool single color Print from AURAPOL PLA. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check the multicolor version!
Measure device for AURAPOL 1kg filament spool MULTIcolor Print from AURAPOL PLA. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check th multicolor version!
It's a Credit card-sized, precise measuring tool. So I have created this tool and want to share it with you as I am sure you have been in this situation as well. You are outside, without your caliper and you just need to find out the…
Instructions as per cmh's source print. I had already been using a 75mm reference point with a less refined tool and the 80mm design by cmh works extremely well so I edited his design to suit. It seems that there is no set standard (I…
File names give information on the tape measure the mount is designed for.
As @Balesz_1733004 recommended I added V2 model file pipe_thread_measere_tool_v2.stl with wider pipe shoe and round edge.
1x3 Gridfinity Adapter for HOTO Smart Laser Measure Pro This 1x3 Gridfinity adapter is designed to securely hold the HOTO Smart Laser Measure Pro , keeping it easily accessible and neatly stored in your Gridfinity setup. T he snug fit…
Simple tape and caliper storage. To reduce warping, ramp up the bed temperature to 80 degrees.
You can view the cooking measurement in FreeCAD, it is parameterized and we have also attached a set of sizes for which you get the volumes of 1000, 3000, 5000, 10000, 50000 and 100000 mm3, i.e. 1, 3, 5, 10, 50, 100 ml. You can change the…
If you want to learn how to remix models you can find on printables.com or how to prepare them for 3D printing with Autodesk Fusion, check out my book: “3D Printing with Fusion 360” on Amazon: https://a.co/d/5ztftox Packt website:…
v4 of the Ryden Bikes measuring tool was remixed to fit a meter stick - ruler easily obtainable at Amazon US: https://www.amazon.com/dp/B00KQ6AENG The meter stick is 5.5mm x 28.5mm thick. The BB piece was resized to fit snuggly. The…
A headphone measurement rig built around the minidsp umik1. If you make different baffle insert for it, it will probably also work for there mics.
These models are accessories for the Printalyzer Densitometer and the Printalyzer UV/VIS Densitometer made and sold by Dektronics, Inc . When trying to measure photographic step wedges on a densitometer, it can often be quite difficult to…
Modeled myself in fusion 360 using the gridfinity design. designed around the Starrett part number 234a-6 rods. Fits in short Kennedy toolbox drawers. Please like, follow, rate and upload your makes.
A fast to print ruler that is 200mm, or 20cm long. Check out my other models! No AMS or other multicolor options required! How to print: In Bambu Studio or other slicers, slice the plate with the ruler, in the preview on the right side,…
Updated part geometry for better fit with 1/2" Sch 40 PVC (28-Jan-2026) I give Uda first billing since he never gets the credit he deserved because his name isn't as cool sounding as Yagi. This project is for parts to make a 2M beam…
A holder for the Xiaomi smart laser measurer. Nice and snug fit with TPU, very tight with PLA. Comes with a lid. Can be used whilst in the holder
Tool to measure 12 gauge choke size(Cylinder, Improved Cylinder, Modified, Full) Works for all 12 gauge shotguns. Doesn't need much structural integrity. I did 2 wall loops and 15% infill and works great.
I wanted to make this remix to make consistent colour changes on this ruler for my partner. Thought it may come in handy for others who don't have the patience, time or knowledge to slice manually. I printed this with default PLA…
Redmi Note 12 Pro 5G 1:1 scale 3D model of the back housing, created from measurements taken directly from the physical device and modeled in Fusion 360. Model overview Real-size representation of the Redmi Note 12 Pro 5G body with flat…
I didn't like others designs where the tape stay looking downward so I made this. Used a thread for a strong and ready to use connection.
I remixed this model because we have a metallic door frame and I thought it would be cool, if the orignal model has a magnet. I added just a hole for a 6x2 magnet. Furthermore, I recommend glueing the magnet inside the hole. Original…
Had a small tape measure with a housing that needed updating. Printed with PLA and 0.15 layer height.
This model is a single-piece holder designed to keep standard hand sanitizer bottles organized and stable. The geometry is optimized for No Support Needed printing. The wide base helps reduce tipping. Suitable for workshop, bathroom,…
Parts Needed: 2x M5 x 12 (or 16) screws 2x M5 Heat inserts 2x Multiboard Heat Insert Snaps M5
Since I was having trouble judging small gaps when adjusting detailed prints, I created a few simple tools with known thicknesses (0.2mm to 0.6mm) Print with 0.1mm layer thickness (results not guaranteed otherwise)
I needed a simple box to hold my laser tape measure on my multiboard. The internal dimensions are 30mm deep, 52 mm wide, and 40 mm tall. This is fully print in place with no need for supports thanks to using my own design of snap anywhere…
Mount your mini tape measure on your skadis board no supports Check out my fully modular Skadis system:
A tool I designed to help measure the rear sag of the Tenere 700. Slide it into your rear axle and either use some string in the hole at the back or put a tape measure in the slot and measure away. Please Note: The slot for the tape…
This holds a tape measure to openGrid using openConnect. You can use any of the openConnect snaps but I've included the screw in type here. You need 2x snaps to connect to openGrid.
I had endless issues with the default insert for the Lee Auto-Drum Powder Measure gouging cases or crushing freshly annealed case necks or not dropping consistent powder quantities. No matter how I adjusted it I couldn't get both a good…
Description This is a remix of a remix of the original Skadis tape measure holder, redesigned into a wall-mounted version for more permanent setups. The Skadis pegboard mount has been removed and replaced with a flat backplate featuring…
Here is a ring that will slip over the Dillon XL650 & 750 powder measures to label whatever you want to make it easier to remember.
funwheel x7 bold organizer with raised lines for screw measurement
Take quick and accurate measurements of your saddle position so you can "copy" the position over to a new bike. I have included 3 different widths depending on which biomechanical reference point width you wish to use (70, 75, or 80 mm).…
Here is a ring that will slip over the Hornady Lock and Load Ammo Plant powder dispenser. The slot in the front will fit the standard sized paper stock for akro bins. I find it handy to be able to have my load data directly in front of me…
My Gridfinity 2x1x4 bin for the Dewalt Atomic Laser Measure loaded on it's side.
A dedicated Gridfinity storage solution for the Bosch Professional 5m Tape Measure (1 600 A01 6LD). This model uses a 2.5 x 2.5 grid size, offering more granular positioning within your drawers than standard 3x3 blocks. It is designed to…
Tape measure case to convert a commercial tape measure to something Grandpa Nurgle would be proud of. I used a standard 6'/2m tape measure bought at Canadian Tire. Category: Hand Tools
Gridfinity compatible holder for 3m tape measure. Holds it vertically to save space and fit in 1x2 42mm gridfinity bin Should fit most 3m tape measures as long as they are smaller than 65mmx32mm, has cutout for belt clip
Ring size measurement prints. I did not like that the options that were available for this were all thin pieces, while these take more material and time to manufacture, they are far more reflecting of actual rings. These were designed to…
Completely 3D printed, no additional parts needed, headphone measurement stand using clone E610A coupler and clone KB501X pinna. This design aims for a single ear measurement. For a double ear measurement, use smaller couplers or consider…
I Measured Once, Cut Twice And It's Still Too Short
Needed a model for my tape measure so I can create a custom Gridfinity bin for my specific brand tape measure. The tooltrace AI tool was having difficulty tracing this one due to the dark colors. Uploaded the 3D scan results in case…
Needed a Gridfinity bin for my tape measure. Used 3D scanning to trace the outline of the tape, and designed this in Solidworks.
Clip to hold a phone to a torque wrench or breaker bar when you need to torque to a specific angle. Feel free to remix to different diameter torque wrenches and width of phones. When using PLA, leave the phone gap around 1mm narrower than…
2x2 Gridfinity Tray pulled from ( https://gridfinity.bouwens.co/ ) that I added a cutout for the 25' Ryobi Tape Measure
Magnetic tape measure adapter. The front clip sits at 2". The tape Back is 2.5" wide. Sitting a 12' tape measure flush to the front. And sits a 16' tape measure flush to the back and .25" over the front end for a 2.75" total width. Tested…
This can be used for anything - washing liquid, powder, food, dieting, but I made it for mixing 2-stroke oil into petrol. Measure up to the bottom part of the funnel section. Add a little extra to account for liquid left after pouring…
This is a ⅓ scale working model of a Federal Signal STH-10. This siren uses a Samsung DE31-00029H microwave blower motor. It is also compatible with the 29K and 29J and any other 2.9/2.95" length Samsung motor. Credit to my boi Charlie…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is a replacement lid for the Lyman Brass Smith Powder Measure. The original is a soft plastic with an overly snug…
Hi! Iflight IH3 with O3 Air Unit. It's my first FPV drone.Didn't find model so produce my own from drone i have. Here is Bottom and top plate. Printed it's matched with original frame. It's only frame, but i will produce more just to…
Remix of the "Screw measuring tool, imperial" by cdlong. It's the Imperial Screw Measure Tool, but Shorter. We didn't need all of the diameters, so I knocked those off, made it shorter so it looks nicer, then added some magnet slots for…
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…
Ruthex Heat-Set Insert Tools Background I had some time to explore and decided to try making use of inserts in my designs and projects. After exploring YouTube and Amazon, I treated myself to some specialized soldering tips that were…
Same model just made it with a T clip system
This little widget pops into your crank bolt (assuming it has an 8mm hex) and features a slot on the outside for your tape measure to bite into. It helps you get a highly precise measurement of seat height (in combination with something…
Snap together tailor tape measure winder/storage mechanism There are two options to choose from: 12mm tape version 15mm tape version
English: The MaßMount is the solution for keeping your tape measure handy and tidy. This wall mount is specially designed to hold measuring tapes of different sizes. Product dimensions: Outer dimensions: Medium: 5.6cm x 7.6 cm x 6cm…
This is for testing hole size on different material to get a understanding on the magnet hole measurement. Love this model? Follow me to stay updated on new designs. Your support helps me continue creating quality models for the community.
Thicknessgauge: Easy Thickness Measurement from 1 to 10 mm This handy tool is perfect for hobbyists and modelers. With the Thicknessgauge, you can easily measure the thickness of materials or objects, or use it as a template to better…
HoneyComb Tape Measure holder for my Stanley 3m It can also be used for other tape holders as well or something else. Dimensions : 7.5 cm width - 4 cm height How about buy me a coffee buymeacoffee.com/spank7
Spool holder with integrated scale. Upgraded firmware, Two new menu: 1 selector of presave spool mase 2 set presave of 10 spool mase. And save of old presave used after poweroff. https://a360.co/2EB0h4H i used this thing…
I needed a higher one for my gridfinity rugged box. So I made it 3 gridfinity Units high.
Most of the mounts I found were just too small for my 8m tape measure, so I designed my own! This made use of the wonderful Gridfinity featurescript by Seishin…
A Gridfinity bin that fits both the HOTO laser and the HOTO tape measure, can find them here on this bundle on Amazon .
Thank you to @Ts3dprints_1653 for the original design! Remixed to fit the standard Stanley tape measure clip.
Frequently seen in pictures of games. This is a “song and blades” game system meaurement triangle with Long (18cms), Medium (12cms) and Short (7.5cms) sides. Easy to use. Pictures of 2 versions using the same file. Plain - printed on the…
This is a remix of a usefull model. I made it so it fits perfectly 150cm long Sewing Measure Tape
There are a few models here that are close to this. But this model fits all 4 of my large tape measures (the kind that are about 3.5" wide and 25ft or so long). One #6 countersunk screw. Don't over tighten the screw or it will crack. Just…
I have made this lobster meter that measures 87 mm between the gap, which is the smallest measure of lobster in Denmark,
This Sy's Peglock compatible tape measure holder can be customized to fit your tape measure, open the .3mf file in Fusion and go to Modify > Change Parameters to set the length and width of the tray. The linked 3mf file is a smaller size…
Simple skådis mount for the Stanley LeverLock tape measure. This mount is specifically for Leverlock models as it relies on the lever's tapered wedge to secure it.
This model is a ruler, used for conveniently seeing what sized bins would be needed for items you want to store using the Gridfinity system. You can print in a single colour or easily paint the numbers for a higher contrast. Potential…
In the cult Polish comic book "Tytus, Romek & A'Tomek" , the main character receives a geometry homework: " Measure the height of a tree in Grandma Kowalska's yard. ": After an unsuccessful attempt to climb the peak, a device appears,…
This is the 7th and current design of my 4-beat note tray to hold the music note duration manipulative pieces found here: https://www.printables.com/model/615947-music-note-duration-manipulatives The design has been tested extensively…
cooler plate for an AMD Instinct MI25 GPU for prototyping
A simple tool to help measure angles in places you can't use a protractor. Assembly requires a screw, nut and a washer. The STL models are made for a 8mm M3 screw, 7mm washer, and M3 nut. But you can adjust the parameters in the provided…
Custom hard dividers for inside my AC Case
Measure device for Bambulab 1kg filament spool single color Print from bambulab PLA BASIC. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check th multicolor version!
Measure device for Bambulab 1kg filament spool MULTI color Print from bambulab PLA BASIC. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check the single color version!
Measure device for AURAPOL 1kg filament spool single color Print from AURAPOL PLA. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check the multicolor version!
Measure device for AURAPOL 1kg filament spool MULTIcolor Print from AURAPOL PLA. No supports Layer 0,2mm Infill 15%, GYROID. Print it! Enjoy it! And check th multicolor version!
Features: No extra screws or glue needed Supports multiple tape widths and lengths - parametric Fusion 360 file available Pre-rendered versions for 14 mm, 18mm and 22mm tapes (max length ~150 cm) A universal wide slot to fit all metal…
Multiboard holder for tape measure with clip and folding ruler (1,7 cm x 24 cm x 35 cm)
This simple Tape Measure Holder for Sola Pro-TM 3m uses the T-Clip System with low profile flush mount clips. At the backside is an alignment pin so that it can not rotate and that it only requires one low profile T-Clip. It can be…
Design superceded by Dillon Powder measure knob with clear direction indicator on front, side, and rear. Category: Tools
Harbor Fright 25’ Tape Measure Holder @ MKE Gadgets #87 If you are like me you have accumulated quite a few Harbor Fright 25’ Tape Measure over the years. For quite some time there were free with a coupon. I have one at my welder,…
Included two versions: First one with a small cut, this is so you can easily install it when printed out of PETG, ABS, etc. since the screen gets on the way when slidding it in. Second one doesn't have a cut, my idea was to print it out…
The original design is great. The only change I made was adding raised text with the size of each bushing. I colored the top of the letters with a gold paint marker to make them easier to read. Edit: I made one more update so the lid uses…
