Drain Insert for Hornady Powder Measure
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.71 – €0.87 net (excluding VAT)
For file: Hornady Powder Drain Insert_0.2mm_PLA_MK3S_1h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.79 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 1.02 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cheap knock-off of Hornady's Lock'n'Load Powder Drain insert.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 218
- Makes
- 3
- Views
- 988
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Why spend $20 on Hornady's Powder Measure Drain insert, when you can print one for 14¢?
Printing Notes
Contact area on the build plate is very small. Use a brim.
A little bit of wet-sanding may be necessary.