Counting matching models…
designed a black powder nipple wrench for the TC thunderhawk and similar muzzleloaders. It is a bit tight in PLA. I printed at 104% and it fit well. I used 5 layers all around and printed horizontally with support on plate only
3 slots organizer for baking powder. The holes allows you to grab the powder easily. Internal dimensions of the slots are : 70mm by 100mm. Dimensions of the whole organizer : 106mm by 220mm. Height : 55mm
Introduction: Are you frustrated by the absence of suitable measuring spoons for your dish washing machine powder? Introducing our customizable measuring spoon, engineered to hold the precise volume you require. Design using FreeCAD.…
This design is a prototype tool concept intended to facilitate the transferring of PA12 bulk powder to supply station cartridges to support part printing on an HP MJF 580 3D Printer. This build was an initial build for concept prototyping…
a container for about 1kg of powder or other small substances with a tapering opening and screwable lid
I was looking for a powder sugar sifter but all of them were to small so I decided to model a smaller one
In our house, we loathe wasting money on liquid detergents that cost as much as a box of powdered detergent, and clean half as many loads. This dispenser was designed to hold our detergent in a closed box to alleviate some of the humidity…
Replacement lid for Lee Powder throw. Just sits on top like the original. Slight resistance on a well calibrated printer. Adjust the scaling up or down if you have issues with your printer.
Tool to pre-level the powder in a LisaX ( or similar model) from Sinterit before the leveling procedure.
Ergonomic container for dry goods with a thoughtful waist design for comfortable one-handed grip. Features: • Ergonomic waist shape for secure grip • Won't slip from your hand • Includes matching scoop • Tight-fitting lid •…
I needed a bottle dispenser to easily control powder dispensing. I made this two-piece bottle that requires no supports to print. Four patterns for making it look nice. 20.Apr.2026 Update: I uploaded the top and the smooth base as…
A smart no-spill powder scoop designed for protein shakes, joint supplements, fizzy powders, or anything you mix in a glass or shaker. 🔄 The sliding bottom lets you drop the entire dose straight into the container 🥤 No more powder spilled…
Features It opens It has a timer It is screen accurate (does not explode) Other Parts Egg timer Hinge Magnets (3/16" diameter, 1/8" thick) Instruction Print one of everything Take apart the egg timer. Screw the Timer Connector onto the…
Tornado nozzle with enough room for the performance upgrade made by Cycle Fab
This allows you to use bottles laying around the house instead of purchasing Eastwood bottles. This was designed to be used with a 1lb nutricost creatine bottle but I found other bottles work as well such as a 2lb peanut butter bottle.
A slide-to-drop scoop designed for easy and mess-free transfer of powders into bottles, shakers, thermoses, or containers. The scoop features a sliding bottom: simply collect the powder, place the scoop onto the bottle opening, and slide…
This is a minor remix of a brilliant design by Wici. I've printed several and then decided to modify them slightly to enlarge the container and smooth out the sharp edges.
This is a vacuum adapter primarily for multicolor powdercoat. It fits a standard 1-¼ inch vacuum hose and tapers down to a 3/8 inch tube for detail vacuuming.
Hallo, ich habe eine Dose für Pulver konstruiert. Zum Beispiel für Spülmaschinenpulver. Im Deckel ist ein Verschluss eingebaut. Mit dem Kleber muss man sehr vorsichtig sein, damit die Verschlussscheibe nicht im Deckel klebt. Ich habe die…
I bought the Hornady case activated powder drop attachment ( https://www.hornady.com/reloading/presses/lock-n-load-accessories/case-activated-powder-drop-powder-accessories#!/ ) hoping it would work with the Brass Smith dropper, it did…
Detergent Powder Container & Dispenser Practical container with integrated mechanical dispenser for powder detergents. Enables clean, accurate, and repeatable dispensing. Suitable for placement on a washing machine, shelf, or in a…
I was looking for a quick little project to make to try out a technique for easily making multi-color paint-able object that use the smart painting capabilities of the slicer rather than modeling the different colored bodies specifically…
This is my custom made tunnel that fits the Vevor Powder Coating Gun. This is slightly smaller than the Harbor Freight version. When installed with the new diffuser designs that are available, it will improve functionality of this tool.…
This is my version of the Harbor Freight Powder Coating Gun tunnel. It is very similar to the units available on the web. This will not fit the Vevor gun. Link for Vevor version here:…
I had endless issues with the default insert for the Lee Auto-Drum Powder Measure gouging cases or crushing freshly annealed case necks or not dropping consistent powder quantities. No matter how I adjusted it I couldn't get both a good…
The spoon holds about 15g of powder. It is available in two variants: With hole → ideal for hanging or attaching to hooks Without hole → clean, uninterrupted handle design This 3D printable spoon is a complete redesign from scratch(!)…
This model is a remix of my redesigned spoon, now featuring a shorter handle for improved control and compact usability. Originally based on the model: This version keeps the clean and minimal design of the full redesign but adapts the…
Here is a ring that will slip over the Dillon XL650 & 750 powder measures to label whatever you want to make it easier to remember.
Here is a ring that will slip over the Hornady Lock and Load Ammo Plant powder dispenser. The slot in the front will fit the standard sized paper stock for akro bins. I find it handy to be able to have my load data directly in front of me…
This is a quick print for a supplement scoop with a funnel! The scoop holds exactly 30g of protein/creatine or any powder. Recommended print settings: -4 wall loops -0.2mm layer height -80% gyroid infill (the infill is only used on the…
So, my mom wanted one of these, and these do exist, but all of em are just too expensive (minimum 100$). So yk, I built one myself that I can 3d print (once I get my printer :P). So basically, its a storage box, or as I like to call it,…
This is a work in progress, but it should work; this goes up to 308. You will need two retention style springs. And a QD bushing. This is to tell you that the powder has been charged, not how much. A newer version will be released later…
Volume approximately 30 mL (or approx 2 tablespoons), just made a smaller version from remix (https://www.thingiverse.com/thing:4297751). Update 3/29/2025: As much as I like this design, the handle has broken twice for me! (Maybe 3 times?…
Take a look to my new and complete redesigned spoons here: EN: A spoon that holds about 15g of powder. The spoon is an improved version of my “old”, smaller spoon. If you like my model(s) please leave me a like to support my work. Thank…
Always losing the scoop in the gym sauce? This is the solution… This is a holder specifically designed to keep the scoop in one place - so you never lose it again. For the moment this is only for the Rule 1 - 5.1lb size, I'm unsure if it…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is a simple and lightweight dust cover or lid for the Lyman Brass Smith Powder Trickler, measuring 10mm tall in…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is a replacement lid for the Lyman Brass Smith Powder Measure. The original is a soft plastic with an overly snug…
Fits on Küpper/Kuepper Pegboard and holds Hornady Powder Trickler for reloaders.
I need it because I keep cutting the top off incorrectly, or the flimsy plastic cap gets torn off at some point. Only requires 0.4g of PLA filament – a useful model to print from leftover filament. OpenSCAD source file:…
designed a black powder nipple wrench for the TC thunderhawk and similar muzzleloaders. It is a bit tight in PLA. I printed at 104% and it fit well. I used 5 layers all around and printed horizontally with support on plate only
Il est costaud, il est simple et il fera votre bonheur :-D (réglages et filament utilisé, voir les photos)
I wanted a scoop for the powder for my dishwasher. Could have used an ordinary spoon but wanted to print it :-) I used red PLA, 0.2mm layer width and no supports. There is a small bump in the middle but it would be there with support…
Simple ring that fits around the top of a 1lb smokeless powder bottle so that they can be stacked on top of each other. These were printed with standard PLA, 10% Cubic Infill, No Supports, with an 8mm Outer Brim. Note: Because the base is…
Sharp edged shovel for dosing 50 ml washing powder. Printed from PETG. Please share your makes! Scharfkantige Schaufel zur Dosierung von 50 ml Waschpulver. Gedruckt aus PETG. Bitte teilt eure makes!
Print the cap twice. The original creator has another cap that you can use as well, but because I didn't use it, it didn't feel right to upload that. All the design credits go to the original creator, 3DHippo. The pictures use a cm ruler…
Update 11/21/2024 308 win has been added to the group. My initial prints have been made out of PLA but PETG also works. Because of the thin sections that label the funnels, I would recommend waiting for the print to cool down before…
based on https://www.thingiverse.com/thing:3265558 but redesigned from scratch. Now fits much better (IMHO) ;-) BTW. Here it is my site for reloads and reloaders http://reloaddata.pl Print instructions Category: Parts Print Settings…
Powder coating equipment is not outrageously expensive but I only plan on doing it occasionally on small parts and I want to do it as inexpensively as possible. This build includes printable parts for both the power supply and the powder…
Extension handle for Bodytech brand scoops for protein powder, creatine powder, etc.
I printed this on an Ender 3 v3 SE with a 0.4mm nozzle, i made out of PLA and can be printed without supports if printed top side down. i used 30% infill but you can use less.
Design superceded by Dillon Powder measure knob with clear direction indicator on front, side, and rear. Category: Tools
The caliber-specific powder funnels are stable printing with default settings. Print with the funnel mouth facing down on the build plate for best results. Will work with nozzle sizes from 0.25mm to 0.6mm, although finer details, such as…
3 slots organizer for baking powder. The holes allows you to grab the powder easily. Internal dimensions of the slots are : 70mm by 100mm. Dimensions of the whole organizer : 106mm by 220mm. Height : 55mm
Measuring Spoon & Funnel Set for Protein Powder & Sports Drinks. Ideal for Milkshakes & Shakes, Perfect for Kitchens & Restaurants. Print the different parts and glue the parts together with the right amount of superglue. The sliding flap…
I designed this to sit on top of the normal cap. The cap is intended to hold tightly against the rotational cap and hold in any leaked powder. Better contained or at least heavily mitigated is better than loosely spilling. In addition to…
Being annoyed by the crappy paper foil lid of the coffee whitener powder I use every morning, I have designed a minimal coffee powder lid with a portioning opening for e.g. "Gut und Günstig Kaffee Weißer" and other comparable brands in…
This is a 2x2 Gridfinity block that holds 4 compact powder make-up pans (or similar) upright, at a slight backwards angle. Specifically, it fits pans around 73 mm in diameter and up to 14 mm in thickness.
The rose pendant that Ekko gifts Powder. THIS CAN ONLY BE PRINTED ON AN MSLA RESIN PRINTER To finish the build you must buy “eye pins” and “gauge head pins” from online ( https://www.amazon.com/PH-PandaHall-Stainless-Findings-Earring ) or…
Introduction As a big fan of the series, I decided to make this nice monkey. Excellent for a Cosplay, gift or simply as decoration. Come and make this little monkey with me ! This project is far from perfect, so I attach the STEPs files…
What are Baking Powder Submarines? While they came in all shapes, colors & sizes, they all worked on the same principle. When placed in water they began to dive & surface multiple times on their own. The secret? A pinch of Mom's baking…
Baby milk powder container with an added partition for proper measuring cup alignment. Used with a reserve for 350 g of milk. Print with support under partition for proper measuring cup alignment. Print with 11 cm wide top -…
The rears screw together with a 1/4-20 and the fronts have ¼-20 holes to give you something to gab on to when removing. Might have to fiddle with the size % on the fronts or just adjust post-print with a knife.
The perfect solution for securely storing your Dillon Precision Powder Measure while adding a touch of style to your reloading setup! Crafted with precision and care, this wall mount is 3D printed in a shade of blue that perfectly…
Upgrade your reloading setup with our sleek and sturdy Powder Funnel Rack, designed to fit seamlessly with your Dillon Square Deal B, RL300, RL450, RL550, XL650, XL750, 1050 and 1100 reloading machines. This custom-designed and 3D printed…
Organize and store your powder or shot bushings effortlessly with these wall-mounted racks. The powder rack can hold up to eight bushings with a 0.875" (7/8") outside diameter, while the shot rack accommodates eight bushings with a 1"…
Introduction: Are you frustrated by the absence of suitable measuring spoons for your dish washing machine powder? Introducing our customizable measuring spoon, engineered to hold the precise volume you require. Design using FreeCAD.…
From OP: Features Scoop Volume : 70 ml Robust : 2 mm Wall thickness Slim design for high slim boxes Long tip to reach corners Low Material Usage: 23g Print Settings Layer height/Resolution : 0.2 mm Infill : 100% Material : PLA Support :…
Powder dispenser similar to a pepper mill. Can be stored upside down to prevent powder from falling out. Easy to disassemble for cleaning. Printing printed in PLA; layer height 0,12mm to get clean threads; use support Assembly the small…
I use this to avoid spilling when refilling the dishwasher powder jug. I still prefer powder since I have a fairly small machine and the ordinary tablets lead to overconsumption of detergent and leave residue in the machine and on the…
This design is a prototype tool concept intended to facilitate the transferring of PA12 bulk powder to supply station cartridges to support part printing on an HP MJF 580 3D Printer. This build was an initial build for concept prototyping…
Funnel for powder and shot for 12 gauge shells.
This makes it possible to use a progressive reloading press with a separate powder-measuring method, such as an auto-trickler. Hornady makes a "Powder Funnel Die" to solve this problem, but it's not case-activated: you have to pour in the…
I remixed STANAG 4694 rail by cmh to create this. Stanag rail should be compatible with picattiny accessories. My little contribution in making the world a weirder place. It is designed for fit .36 caliber Uberti colt 1851 I don't know if…
this powder baffle help with the change in pressure inside the powder tank, keeping a constant pressure over the dispensing hole, increasing the precision of the dispensed quantity.
I enlarged the hole for the spring and beveled it as the spring was sticking inside of this parts.
PRINT IN TPU FOR BEST RESULTS! The file is meant to just fit onto the poles so if you print this in a non flexible filament it may not fit onto the pole. When securing the basket to the pole, you should twist it on, just how you took it…
This Laundry Scoop, 3D printed from eco-friendly PLA (but it could be done with any other filament). Its slim, compact shape makes it ideal for use with smaller washing machines and their drawers. Please note, some areas of the design may…
Pulver Spender für Geschirrspül Pulver Durch drehen kommt eine Ladung Pulver raus. es wird benötigt: 2x KAISER 2472-15 Geräteschraube 15mm Powder dispenser for dishwashing powder. When you turn it, a load of powder comes out. it is…
Waschpulver Box mit Deckel Dies ist ein Einsatz für einen Bambus Container von Ikea Die Befestigung des Deckels wir mittels einen Filament Stück 1,75mm ausgeführt.…
The original model links to a GitHub repo with a swift package. I adapted the code to generate a 15ml/15g scoop. For convenience, I uploaded it here in case anyone else needs a scoop in that size.
Ein einfacher Löffel zum dosieren von Everdrop Waschmittel. Ohne Support druckbar.
This is the “Powder Mag” My first attempt at a fast, consistent, and precise powder dropper for reloading. Has been working well with ball and extruded powders, I have not tried flake powders. With the few powders I have tested, it has an…
A cup to measure washing powder to 85 ml. Fits perfect in my washing powder box while the handle stays clean. No supports.
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly These powder bushing boxes are printed as separate parts that are printed in orientations chosen to maximize…
a container for about 1kg of powder or other small substances with a tapering opening and screwable lid
My wife does her nails using the Sistaco mineral nail powder system. Her collection of colors is rapidly growing. Each color is a powder in a tiny jar where the actual label sits on the bottom. With her input, I designed these stackable…
Eine Dosierhilfe bzw. Dosierbecher für Waschpulver mit schrägem Griff und Ausleermulde. A dosing aid or dosing cup for washing powder with an angled handle and emptying tray.
A rack that holds 30 bottles of Mica powder (10g/per bottle). The holder is designed to hold bottles steadily and showcase their color clearly while remaining sturdy, easy to print, and efficient with filament.
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly These powder bushing boxes are printed as separate parts that are printed in orientations chosen to maximize…
