Mushroom Lamp - fast print for e14 lampholder with screwfix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mushroom Lamp for bedside, desk, table, cupboard Designed to be printed in one continuous spiral - fast and beautiful
- Ocena
- 5 / 5
- Polubienia
- 215
- Pobrania
- 727
- Wydruki
- 1
- Wyświetlenia
- 4362
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This decorative and functional light has been designed to be printed in one continuous spiral - fast, lightweight, material saving, functional and... beautiful?
The model is prepared for an E14 220V lamp holder with a screw fix (+/- 3 cm diameter). There is a small hole (6 mm) on the bottom side to put the cable through. (This is a detail that might need improving, now I use a 6mm drill to remove the wall at the end of the hole, to guide the cable more naturally.)
Designed in Rhino3D by STUDIO BL / Bastiaan Luijk
Dimensions: ~17 x 17 x 17 cm
I printed this model successfully with the following configuration:
- Printer: MK3S+
- Slicer: Simplify3D
- 0,8mm nozzle - 1.2mm printing width
- 0,3mm layer height
- 10 bottom layers
- vasemode
I used recycled and bio-based translucent materials like rPETG respectively Lignin/PLA composite to 3d-print this model. These materials let the light through the shade and have good temperature resistance (deform >75 °C). Please be aware of this when choosing your 3d-print material and light source - I recommend using LED. (especially when using PLA)
This is my first public model, so I will add more information if necessary. If you have any suggestions or questions, please let me know.
I am curious how you like it and how your make turned out. If you share it on socials, please tag my instagram account @designstudiobl, Thank you!