Liczymy pasujące modele…
Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!), has been…
Mod for Logitech G29 , G27 , G25 , or Driving Force GT pedals by replacing the stock potentiometers with Hall effect sensors for smoother, more precise input and zero wear over time. This printable bracket makes the conversion simple and…
Lets you mount an ASUS ROG PG279Q power supply underneath your desk with a single large Command Strip.
This is my version of the gears for replacing the potentiometers of the Logitech G29 (should be the same for G25, G29 and G920 but I can't guarantee it, comment if it works for you!), with generic dirty cheap Aliexpress ones (WH148) as…
Logitech G25/G27/G29 Bearing Housing remix from ataylor's model ataylor's model is a promising fix for the G27 housing but it requires a lot of filament and takes a while to print (almost 8hrs for my Ender 3 V3 SE). Granted that it's for…
The Next Level Racing GTLite Junior does not include a shifter mount, and Next Level Racing does not sell any accessories to attach a shifter to this cockpit, so I decided to make one for my kids sim rig. The 2 upper clamps may be a tight…
ATTENTION: Updated many little incorrect measurements. No matter how many times I look I find a little thing, so PLEASE check back to see if I have posted an Update. V11F is most current, Includes the 2 metal pieces along with the 2 shock…
Um suporte de parede para o extensor do aspirador ERG27 da Electrolux. ----- Wall mount for Eelectrolux ERG27 vacuum tube.
Files: v3 is for bricks that are 7.5cm x 7.5 cm and older. It has only one lip, because I'm to lazy to backport the second lip to the old version. v4 is for bricks that are 6.5cm x 6.5 cm and newer. It has two lips. The fit is a bit…
A mount a MSI G274F monitor (27'' monitor in photo) The MSI monitor has a mounting space for a Vesa75 (75x75) and the supplied mount of the Amazonbasics monitor mount is 100x100. Created the mount, rather than buying one. The mount was…
Simple wall mount for designed for Logitech steering wheel but probably fits other brands too. It has kind of slide system to correctly hang the wheel under desk where you can't see that well. Also you can screw the wheel onto the holder…
Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!), has been…
This part allows the G29's pedal and power cable to be cable managed under your desk without straining the cables or permanently modifying your wheel. The cable block screws onto a custom mounting bracket which is screwed into preexisting…
Hi Internet Sim Racers! I present the Logitech 70mm Hub Adaptor "kit" with 2 versions and a Quick Release Hub Adaptor. Whats in the Pack? 1) Standard 70mm adapter puck similar to that which is very popular. 2) Stubby 70mm adapter which…
This is a simple Logitech Shifter handle adapter. The idea here was to let me fit a common thread shifter knob from ebay nicely onto the G25 shifter I have. For the demonstration, I used a BMX foot peg as a handle ($10 for 2 pegs...…
Knob adapter for G27 shifter. (Please, let me know if other shifter knob model works) This should work with G25, G29 as well, please let me know if it worked Knob Socket Dimension 17mm File is in correct position to print (see in image).…
Simple backplate for Logitech G27 steering wheel. Covers the cables and is low-profile. FreeCAD file included.
Needed stuff for adapter m5*20mm screw x6 m5 nut x6
H Gate Shifter // remixed from Antonyart's H Gate Shifter // This specific H Gate Shifter can be used as an H Gate AS WELL as a Sequential Shifter with two (2) slits on either side for rubber bands. I'd recommend 25%+ infill with a…
3D Printed Monitor Stand (Modular and Interlocking Design) for ASUS ROG Strix XG27ACS Overview: This is a modular and interlocking monitor stand designed specifically for the ASUS ROG Strix XG27ACS monitor. It is intended to help organize…
A very simple adapter to mount the Logitech Brio 4K on top of the Kuycon G27SE. The model includes a 10º tilt which optimizes the field of view for a monitor that is either mounted over a stand of about 7.5cm or a vesa mount that puts the…
Mod for Logitech G29 , G27 , G25 , or Driving Force GT pedals by replacing the stock potentiometers with Hall effect sensors for smoother, more precise input and zero wear over time. This printable bracket makes the conversion simple and…
I was scared to see the shifter clamp resting directly on the table. I decided to draw a tip for the clamp on my Logitech G27 shifter. It might work for other Logitech shifters, I don't know.
Replacement part for a genuine one. Used Prusament PC blend Carbon Fiber to print this part.
If you love this, please consider tipping me, as a lot of work when into this: paypal.me/Mathewdelapa UPDATE!!! 12/05/2023 - I uploaded GTQR Adaptor, so please print that out as well! PARTS LIST 1) Vinyl Wrap (Color is your preference, I…
Lets you mount an ASUS ROG PG279Q power supply underneath your desk with a single large Command Strip.
This is my version of the gears for replacing the potentiometers of the Logitech G29 (should be the same for G25, G29 and G920 but I can't guarantee it, comment if it works for you!), with generic dirty cheap Aliexpress ones (WH148) as…
Short Description A mounting bracket for the Tobii Eye Tracker 5 designed for the ASUS XG27AQDMG monitor (and similar models). It positions the eye tracker perfectly centered on the monitor for a clean and flush fit. Features Designed for…
A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920, tested with the Logitech Driving Force shifter. but should also work for other shifters with table clamps, alternatively the model can be edited to punch some…
This adapter lets you use a universal 6 point wheel on your Logitech G27. The shift light is still visible and usable. Mount to the G27 using the original Logitech screws, and get some new self-tapping ones for the wheel. Category:…
This is a shiftingknob for the Logitech G27/29 shifter. No supports needed!
Logitech G25/G27/G29 Bearing Housing remix from ataylor's model ataylor's model is a promising fix for the G27 housing but it requires a lot of filament and takes a while to print (almost 8hrs for my Ender 3 V3 SE). Granted that it's for…
The Next Level Racing GTLite Junior does not include a shifter mount, and Next Level Racing does not sell any accessories to attach a shifter to this cockpit, so I decided to make one for my kids sim rig. The 2 upper clamps may be a tight…
4xM3 nuts and 4xM3x6mm bolts (best cap head socket screws) needed for assembly. After few test I found extenders wobbly, maybe trying print it with PLA will solve the problem. I'm still working on better version with supports to make it…
Adapts a 2015+ Subaru WRX shift knob to a Logitech G27 shifter. Should fit the Logitech G29 / G920 shifters as well. Also may work with knobs from similar vehicles (2018+ Crosstrek, 2007-2012 Legacy GT, 2004+ STI) I added an M12 thread to…
A remix of AndrewFX's phone or tablet mount for Logitech steering wheels. This stand sits on the nuts that hold the wheel in place and lets you use a phone or tablet as a dashboard if your racing software supports it. The original is…
button box for truck sim no code yet created you can refer to Odevsa model for the code on thier model and Ranppa for the face plate on this just creating a button box for the ETS mainly but since modeling side is done i think its good…
It consists of two parts. It's best to glue them together with superglue. The bottom might not fit perfectly. I heat it up a bit and slide it in to even it out. If it doesn't fit, I add a little more glue while it's still hot :) I printed…
knob for logitech original screw screwed into the top element is foldable :)
Check the original model for the magnet mount file! An improved sensor mount model which doesn't require a screw from the bottom to affix to the pedal mount. Interference fit plug from the side should be enough to hold it in but you can…
The original was really good, but it felt a bit weak to me, so I made this version with 6 magnets instead of 4. It still uses the same materials: 2 M3x20 screws 6 6x3 magnets. props to alfie lockrey and the original creator…
Screw-on attachment :D 100% fill Layer height 12 or 16
Summary This extended attachment for the thread of the Logitech Driving Force Shifter allows an installation on thin tabletops / desks and enhances the stability. Advantages Allows for mounting on thin tabletops Increases the stability of…
I drew some inspiration from some other designs on here to make a completely hidden sequential mod for the Logitech G27 shifter. The bracket goes underneath the shifter boot and you use an elastic band (or multiple) to make the shifter…
I converted the brake pedal from my G27 pedal set to a handbrake. Print this to have a handle to use with the pedal mounted horizontally. Two models are provided, 150mm and 250mm. I used motorcycle grip over the handle, but you could also…
Logitech G25 / G27 to Steelseries SRW-S1 wheel adapter! My friend found that this wheel is really cheap and has a lot of buttons, so I designed him an adapter to mount it into G25 (should work for G27 too!). You will need: Original screws…
I created this simple object to convert the Logitech G29 and G27 into a Rally Shifter. I wasn't happy of the actual design so I created mine. Caution: Only works with the original lether cover or you have to glue it ;) You just have to be…
Logitech G923(G920,G29,G27,G25) Magnetic Shifters Designed to be used with magnets around 26mm size Clamp together with nuts and bolts
This is a preload spacer for the Logitech G920, G29, G27, & G25 pedals. May work for others too? Let me know if so and I'll update the descriptions. I included the dimensions so you can figure it out yourself or remake it however you…
MSI G271 monitor feet/stand 75mm vesa adapter. I converted my old laptop LCD to a stand alone monitor and I needed a stand for it so I decided to use my other spare monitor stand. The model is not perfect but it gets the job done. You can…
This is a remix that better fits G27/G29 wheel as it's a bit bigger so it's easier to put and screw on (shorter screw can be used) and has a small 2° angle. It is also made for 20x10x2mm magnets. This all results in a very nice snug fit…
This is a hook to set onto the back column of a Asus ROG278Q monitor to hold headphones or whatever. Fit is relatively snug, but I added a rubberband to the column to under the cap to make sure it doesn't jiggle/rattle. printed upside…
Extender for Stepperonline 17HSxx-xxxxS-PG27 It was hard for me to get the steppers from the BOM of the Keen-One EQ mount, I also had two 27:1 geared steppers from another project (Stepperonline 17HS13-0404S-PG27 0.4A/28.5mH) and I have…
A patron just informed me a file is missing. I truly apologize for the mistake. The missing file is Rotary_Insert_RS_V7_04.STL A1302 Ratiometric Linear Hall Effect Sensors…
A simple non intrusive design for implementing a load cell into your G2X pedals. I would like to thank Shaun Hutchinson, for his G27 pedals design. Which allowed me to make a quick mod for the pedals. Logitech G27 Pedals I personally use…
Snap on extensions for using larger wheels.
Kit contains Stock Potentiometer Gear, Improved Version of Stock Potentiometer Gear, Improved version of the Hinged Actuating Gear. Actuating gear meshes much nicer than stock and works fine with the original potentiometer gear. I have…
I wanted a shifter mod that looked good, stiffened up the shifter, and could also be transformed into a sequential shifter. I took a few of the other designs (links below) on thingiverse and molded it into this. I printed it but it needed…
This ring mod can be installed without removing the steering wheel. BOM 2 x M3x20-25 Cap Head Bolts 2 x M3 Nuts 4 x Ø6x2.5-3 axially magnetized magnets Secure the magnets in place with superglue. Mount the ring on the wheel's hub and…
Logitech G27 universal phone mount for virtual dashboard. There are different software options but I use SIM Dashboard on an old android phone. https://www.stryder-it.de/simdashboard/ Remove the wheel hub cap (it's just glued in) and…
modification pour volant logitech pour centrer le volant en utilisant l'entre axe de 70mm avec un quick release avec entre axe 75/70mm sur la photo avec le volant on voit le probleme de centrage.
Requires 6 M5x16mm DIN7991 bolts and nuts : https://s.click.aliexpress.com/e/_AB4vpN Then you will need M5 DIN7991 screws to fix the adapter to the hub, but the length depends on your system. The button plate used comes from NSH Racing :…
Pedal plate adapter to mount G27 alloy pedal plate on SRT pedals : https://lebois-racing.fr/srt-pedals Category: Video Games
Steering wheel based on Ferrari 488 GT3 design GitHub Repository: https://github.com/Alby312/GT3-488-Wheel Wheel of 30cm of diameter, based on real wheel of Ferrari 488 GT3 with 12 push button 2 rotary encoder and 2 magnetic paddle shift.…
For the G27 version, this one is un-tested, if you do make it please reach out to me with the required adjustements. This handbrake has been inspired by other models out there. My main perks with this one are: Precise measurements,…
Hi, i created an adapter to mount a 30mm long 24mm diameter vibration motor for FFB in racinggames (SIMHUB). It mounts with 2 M4 30mm bolts. Link to the Motor i used:…
I installed Jarek's shifter paddle extension but it kept breaking on me, so i took his measurements and derived my own shifterpaddle extension from it. I made the obvious breakingpoints of the Design thicker in the hopes that it will…
Hello so I wanted to have a brake that's closer to a load cell for the g27. I really liked the design of the Truebrake by AXC sim, but knew there had to be a way to design it for 3d printing. So here is my take on his brake mod. When i…
The internal bearing housing on my G27 broke, all the bosses that hold it to to the metal motor plate had snapped, so designed a replacement based off the original Logitech part. Due to the design of the part, its uses a lot of supports,…
Remix of https://www.thingiverse.com/thing:4311045 . Thank you for the original. This instead uses 4 of 6x3 magnets. Instead of 8x3. Still requires 2 of m3x20mm. Category: Hobby
I'm uploading it because I've been using it for a long time and it works well, although at first it fits tight, then it takes a bit of play until it stops doing so. I printed it in 0.28 layers with plain black PLA and it works wonders. I…
Hello, Here is a print that went pretty well for me and is very useful. Replaces the stock stand that the monitor comes with, which takes way too much space. Here are a few points to note with this solution : - Fixed monitor inclination…
This is a remix of https://www.thingiverse.com/thing:4666705 It seems Printables doesn't let me use an external URL to define a remix, but credit to jorgepatilawa for his original design. My gear knob from AliExpress came with an adaptor…
I really liked Forker45's shift knob and the fact that H3wro's uses the original logitech shift knob cap, so I combined them together to make this! The picture of my print in black were H3wro's original model (I also uploaded his file)…
UPDATE: I've redesigned my own version of this from scratch, you can find it here: https://www.printables.com/model/800917-logitech-g-shifter-gated-manual-and-shift-knob I remixed the model by simply combining the 'base' and 'top' part…
to replace the logitech logo or the playstation logo on the g29/g920/g27
This adjusts the angle of the Logitech G27 wheelbase by approx. 9 degrees. This design is only suited for setups in which the wheelbase will be mounted with bolts. The brace file is intended to be used as somewhat of a washer to…
I have designed a handbrake that requires no hard modification to your gear selector. Just print out the left or right base plate and clamp it under the selector. Im still working on improvements but it is a working concept for the people…
Quick shifter mount I made so I can use my old g27 shifter on the playseat trophy/Logitech g pro seat. Mounts with a ¼" x 2-½" bolt with a matching hex nut on the other side to the seat frame. 1 of each required. Also uploaded the curved…
I searched for a long time for a way to attach the power supply of my G29 on which side under the desk I use, and since I couldn't find any, I did it, the measurements are right, I tested it for the G29, but I suppose it's also good for…
I was inspired by 3xcelsi0r and his NRG wallmount and decided to make an adapter to mount the wheel from my daily driver to my G27 Base. To mount it I removed the 6 bolts from the stock G27 wheel and removed the JST plugs for the buttons…
Used the merged top and added hooks for rubber bands in order to have the option to convert it to sequential.
Using this model : https://www.printables.com/model/82472-g27-adapter-with-shiftlights
The heavy duty and tolerances revised version of the already best model of thingiverse. If you're tired of breaking your clamps and reprinting them again and again, then this model is for you. I reworked the tolerances in the screw filet…
Racing Simulator Wheel Hot Swap Plates for Logitech G Series Wheel Bases Hub Assembly System I Created to Adapt Real World Racing Wheels to the Logitech Wheel Base. This adaptation does not block wheel base buttons !! Hardware ; Bolts; M5…
Logitech Paddle Shifter Adjustable Extenders These clip-on paddle shifter extenders offset the stock paddle shifter to better fit aftermarket wheel adaptations. These are designed to fit perfectly with my other hot swap wheel connector…
Shift Knob Threaded Adapter for Logitech Shifters Ever wanted to put an actual shift knob on in place of the Logitech foe leather knob? Do it! Install ; Remove logitech foe leather shift ball by popping off center cap. Unscrew standard…
Printer used: Prusa i3 Mk3S+ Filament used: Prusament PETG Layer height: 0.3mm Supports enabled: for buildplate only.
MSI MAG27CQ Adapter for AmazonBasics Vesa Mount This Remix from reparator ,thank you Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: Yes Resolution: 0.3 Infill: +60% Category: Computer
ASUS TUF Gaming VG27AQ1A, repro mount for genius soundbar 100
La idea es colocar un dispositivo de vibración dentro, la tapa se sujeta con dos tornillos (M3.5)
