Vevor Wheelstand (Logitech G25, G27, G29, G920) Shifter Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920. Tested with Logitech Driving Force Shifter.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 793
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920, tested with the Logitech Driving Force shifter. but should also work for other shifters with table clamps, alternatively the model can be edited to punch some holes in case it should be bolted on.
Assembly Guide
You will need two M8 x 45mm screws and two nuts. It is also recommended to use washers if necessary, both to increase the surface area of the screw heads and to fill any gaps between the gear shifter and the steering wheel mount.
Print Settings
Print direction: Print in the direction the files are supplied. To be sure, an image showing the object on the slicer's print bed is attached to this post.
Material: PETG or ABS
Layer Height: 0.2mm
Walls/Perimeters: >6 (more is better!)
Infill: 20% (minimum)
Supports: Non needed
