1 / 4
Vevor Wheelstand (Logitech G25, G27, G29, G920) Shifter Support — image 1
1 / 4

Vevor Wheelstand (Logitech G25, G27, G29, G920) Shifter Support

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920. Tested with Logitech Driving Force Shifter.

Rating
0 / 5
Likes
12
Downloads
77
Makes
1
Views
775
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Noncommercial

A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920, tested with the Logitech Driving Force shifter. but should also work for other shifters with table clamps, alternatively the model can be edited to punch some holes in case it should be bolted on.

Assembly Guide

You will need two M8 x 45mm screws and two nuts. It is also recommended to use washers if necessary, both to increase the surface area of the screw heads and to fill any gaps between the gear shifter and the steering wheel mount.

Print Settings

Print direction: Print in the direction the files are supplied. To be sure, an image showing the object on the slicer's print bed is attached to this post.

Material: PETG or ABS

Layer Height: 0.2mm

Walls/Perimeters: >6 (more is better!)

Infill: 20% (minimum)

Supports: Non needed

Tags