Counting matching models…
A quick and easy 3d print for a magnetic Quick release 20w (5w) Foxalien Laser module mount - designed to be attached to an already mounted 1.5kw Air Cooled Vevor Spindle. No supports required Print at 0.2mm layers You will require 3x M3…
The Vevor 6L ultrasonic cleaner has a brass ball valve with a 3/8" BSP thread - that's an untapered thread with a 16.6mm major diameter with a 19tpi pitch. While the cleaner comes with a fitting that attaches it to included hose, I have…
Notes: To avoid supports, I made it in 2 parts. The TAB must be glued in order to fix it properly to the body of the case. Bend the AC switch pins in order to make it fit inside the enclosure. I have the 3000VA model, which you can find…
The adaptor plates allow you to mount the Vevor casters (2 inch, GD60FD) to your RatRig V-Core 4 500. They allow for clearance on the front Z stepper motors. I used an M8 to M6 sleeve reducing nut to screw into the M8 threads on the…
This kit improve; the access to the block with is angle, the bracket better fixe of the hose to the wall with nice look and one of the bracket can hold the blow gun whit metal tip and plastic handle. All made in PETG.
Vegetable Slicer Organizer for: https://www.vevor.com/french-fry-cutter-c_11660/vevor-commercial-chopper-commercial-vegetable-chopper-w-4-blades-fruits-dicer-p_010148712974 Pegs are located 95.5 mm side to side from each other on center.…
Works with 3-yaw chuck that comes originally with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into every 3D model I publish for free download. If you would like to appreciate my efforts just buy…
The Vevor 6L ultrasonic cleaner has a brass ball valve with a 3/8" BSP thread - that's an untapered thread with a 16.6mm major diameter with a 19tpi pitch. While the cleaner comes with a fitting that attaches it to included hose, I have…
Nohy s patkami pro nezávislé topení Vevor kompakt 2kw bílý,rozteč šoubů M5 do L 30mmx30mmx30mm.
a mount for a small vevor polisher to mount it to the plastic shelf i use as a lapidary work surface. print out of the strongest materials you have and mount with some bolts
Notes: To avoid supports, I made it in 2 parts. The TAB must be glued in order to fix it properly to the body of the case. Bend the AC switch pins in order to make it fit inside the enclosure. I have the 3000VA model, which you can find…
This simple shield slips around the front of your Vevor 1-ton arbor press and lets you operate the press with the shield in place. I made it to be able to crack walnuts without the shells flying everywhere. I printed this in PLA with a .6…
Simple adapter to connect a DeWalt Stealthsonic vacuum to a VEVOR planer . Thin adhesive foam pad can be added for a tighter fit if needed, but it works properly as it is. A straightforward, practical adapter that gets the job done. ;)
This is my custom made tunnel that fits the Vevor Powder Coating Gun. This is slightly smaller than the Harbor Freight version. When installed with the new diffuser designs that are available, it will improve functionality of this tool.…
Small washer insert for 45 rpm singles. Use them to wash 7" vinyl singles in Vevor ultrasonic vinyl cleaner.
The Vevor Dust Cyclone (SKL300) claims to have 4" (100 mm) Interface but the tech spec describes as 3.81" (97 mm) which makes the hose connection rather loose. As the original outlet is quite short and gives not much area to fit a clamp…
There we were, ice maker running, scoop a-flying with no landing spot in site. We used a tea mug for awhile. The mug had a mind of its own and we’d find it in strange places. This scoop holster attaches with magnets. Scoop fits in it and…
Edge guard for Vevor Laundry Pedestal, we store stuff under it and my family likes to just ddrrraaaggg things out against the edge, which I know will tear up the paint (meaning I'll have to buy another set due to their…
Absaugdüße für eine Vevor 230mm Betonsäge. Es muss zuerst der Spritzschutz demontiert werden und mit den 2 freien M6 Gewinden wird anschließend die Absaugdüße festgeschraubt.
So, VEVOR is making a pretty nice, affordable, and quiet watch winders, right? Well, somewhere they have to save some money. For the watch winder lighting, they are using a simple short piece of LED strip, which is not diffused in any…
I happened to find the Vevor microscope on sale for less than 210 USD. Given it's functionality it outshines every other microscope stand for the same price (Available to me). Naturally I wanted a way to adapt the stand to my vintage…
No Support, 10% Infill, Print vertikal Fits Perfekt w/o transparent Sleeve. 101% Shut to the Trick if Sleve is on Maybe old Version of Remote see Pictures! Example…
Mod to use a Vevor foot pedal (the type that comes with the one you buy on Amazon) as a hand controller on top of your desk. Allows for more control over the speed. Parts needed: 1 - 6m x 45 mm screw 3 - 6m nuts 2 6m star washer (lock…
A Guard for the pulley operated pruning shear on the Vevor Extension Pole Saw (RZYLG-2). The Vevor Extension Pole Saw kit comes with a pulley operated pruning shear. This is a guard to cover the tip of the shear that points towards the…
Printed with PLA Plus at 220 °C with 0.28 mm layer height. no support needed 😎 needed: M3 insert nut M3 screw
Here are a few hooks for the VEVOR metal pegboards. These are compatible with the DDD Printable Wall Control System by luma. Please download whatever spacers or centerpieces are appropriate from his github. Located at:…
You will know it when it breaks :D
Designed to fit this 24x18x34 inch stainless steel work table. License This project is Open Hardware. All source files are licensed under the CERN-OHL-W v2 . You may redistribute and modify this documentation and make products using it…
Vevor Pottery Wheel Leg riser to change the height for the potter. Design dimensions: Outside bottom radius = 60mm Inside top radius = 31mm Outside top radius = 33.5mm Top recess = 40mm tall Overall height = 200mm tall Effective Height of…
Allows you to install the heater outside but still recover the air from inside making it more efficient. -Printed in ABS. -0.4mm nozzle. -8 x 3 mm magnets.
Some time ago I ordered a people guidance system from Vevor for Halloween: Product link Here the belts are embedded in the posts. However, I had two places where I had no room for the post. I developed this housing so that I could remove…
A storage box for change gears and chuck jaws for a Vevor mini metal lathe
A set of holders mounted on the guard for a mini metal lathe. The holders allow for the storage of lathe tools and other lathe accessories.
Hey makers! Brief I'm sharing an 80x80 cooling fan adapter and cap for the VEVOR 2.2kW ER20 24000RPM 400Hz square spindle. I haven't had a chance to test it on the other square spindles from VEVOR, but very likely this adapter will work…
3D Part which allows us to place a Macro Lense into a Vevor SC240M Thermal camera. Should work with Infiray C200 and other cameras with same housing. This holder works with 20mm Lens, the only thing is needed is the lens, and two small…
Printed in 85a TPU with good results being firm enough but not too firm. .2 layer 3 perimeter 40% infill grid Hilbert Curve top and bottom
The adaptor plates allow you to mount the Vevor casters (2 inch, GD60FD) to your RatRig V-Core 4 500. They allow for clearance on the front Z stepper motors. I used an M8 to M6 sleeve reducing nut to screw into the M8 threads on the…
Allows direct connection of 6in AC hose to 8in VEVOR inline fan. Small dia side fits inside the AC hose, large side fits outside the rim of the fan intake. Designed to friction fit to allow quick connection. OnShape Link This is part of…
Friction fits to 8in VEVOR inline fan intake. Allows the direct connection of (x2) 4in flex hose on the sides. The central port is sized to accept the 6in AC hose intermediate coupler (it is not designed to accept 6in hose directly, it is…
As a retired machinist most lathes I ran had some type of chuck key holder, always metal, that someone made. I wanted one for this home lathe to prevent it from getting misplaced. It uses the same screws that hold the gear cover plate…
This simple gadget allows you to better utilize space inside VEVOR mini caming fridge. I attached it with doublesided tape.
This is a small pad I designed to use with the VEVOR sim steering wheel stand. The pad is roughly 175mmx175mm and I use it as a small mouse pad, but it is sturdy enough for lots of uses. I had some leftover class 8.8 (M8) allen bolts and…
Replacement base plate for the Vevor 10kg x 0.1gram scale! Even after calibration, the scale base plate does not properly distribute the weight on the scale. That is insulting for a 75$CAD scale! To check if you are affected, simply use a…
Key for Vevor Electric or HAM Antenna box. Steel, IP65 (20x20x6" and other sizes). https://www.vevor.pl/obudowa-elektryczna-c_10749/obudowa-elektryczna-ze-stali-vevor-20-x-20-x-6-cali-ze-stali-weglowej-ip65-p_010919962274 Printed from…
Endstop to designed for the Vevor Evolution 8080 CNC for use with M5 Screws included with the CNC. I used this for my Z axis limit switches. Printed in PLA. 35% Infill
If I'm require to set the fence across the front of the concrete slab in the caravan park I made this to support the fence. Designed for Vevor Portable Fence https://tinyurl.com/Vevor-Fence. I remove the prong base of one stake and use…
My partners vevor pottery wheel doesn't have the option to use bats which use these standard mounting bolts. We tried some available 3d models which weren't really satisfying to use. To save as much filament as possible and to fit the…
Here is an adapter to convert the Vevor diesel heater from 4 small pipe to one 4 inch dryer duct. The piece need to be printed with a filament that have high heat resistance like Nylon, PC or something that can stand 125 celcius (250…
This is the Hub to hold the pin for the pole that holds the tray up. VEVOR Blind Corner Cabinet Pull Out Organizer I would print this with 100% infill.
Organize your mini lathe hand tools , featuring left to right: head and tailstock chuck key spots, a MT2 morse taper spot, 2-6mm hex key spots, a cup for random items, and a tray for oiler cup/bottle/some other stuff. The brackets snap…
To complement my mini lathe hand tool holder for the Vevor mini lathe, I have made some QCTP holders to go along side. I was inspired by https://www.printables.com/model/604708-axa-qctp-tool-holder-rack and a few other models to hang the…
This kit improve; the access to the block with is angle, the bracket better fixe of the hose to the wall with nice look and one of the bracket can hold the blow gun whit metal tip and plastic handle. All made in PETG.
Vevor automatic Tape Dispender AT-60 Skadis wall mount. I created my holder and used the wonderful Skadis T-Nuts System from 6d6178. You need 4 M2x20 screws and 4 washers and 4 mM2 nuts. Have fun.
Z End Stop for CNC 3018 Vevor on drag chain X axisEnd Stop for CNC 3018 Vevor on drag chain X axis
Flange/Reducer Fills the gap between the included Comgrow flange and hose for the Vevor Fume Ext. XF180 (May Fit other Models).
Small storage that fits the Vevor vinyl cutter to store wires and accessories. It was printed with a 0.6mm nozzle with 30% infill in PLA On one of the trays, there is a small hook to hang the color samples.
Bad injection mould or bad design, or maybe I'm overloading my barrels, I'm not sure…but the roller wheels have given up on me one by one. Vevor was kind enough to either ship me replacement ones or refund part of the order and I picked…
A fume extractor filters harmful fumes created by soldering or other processes. When soldering, fumes are created by the heated flux. They contain VOCs and gases that are harmful. Activated carbon filters are used to capture these by a…
Please like and download this model, It helps me justify the time expense. This is designed to be printed in TPU. 85A works better than 95A. I recommend something like NinjaFlex since it is documented to hold up to oil. The cover fits on…
3 makes posted here: Controller holder: A little box for the controller. I have marked the mounting holes and cut two 5mm threads to mount it. You can cut thread or glue it if you dont feel like cutting thread. Spark catch: 150x150mm…
Great for van life, RV or off-grid battery setups. Mounts to any flat surface via two screws or double sided tape. Design includes easy access to all controls and cutouts to keep the charger cool. Models are print oriented. I recommend…
This is a little organizer I made for the Vevor microscope it should work also for all other cheapish microscopes with the same stand (Box occupies 205x135 mm). I added a few segmentations for Soldertips, Solderwick and other stuff (see…
Aufsatz-Adapter (ohne Befestigung!) zum Planfräsen.
Reduction for size change 75mm to 50mm, for Vevor diesel heater and all other brands
Plate that comes with router is not perfectly round and is small, not stable enough. So i made one for my needs. It doesn't use standard (makita clone) spacing for screws so i had to start form nothing. Included are 3mf file if you just…
This adapter allows you to connect a standard 80mm duct/hose to your Vevor 2kW diesel heater. It is designed to replicate the original bayonet locking mechanism for a secure twist-and-lock fit directly onto the heater unit, providing a…
support_heater These support legs are designed for the Vevor Heater to increase stability, elevate the heater above the ground, and reduce heat transfer to the surface. They improve safety and allow better airflow underneath the unit.…
About It gets pretty cold where I live and the heater I bought wasnt cutting it. Everyone has one of these diesel heaters according to youtube, so I decided to try one. The intake and exhaust come out of the bottom and if you dont put it…
Vegetable Slicer Organizer for: https://www.vevor.com/french-fry-cutter-c_11660/vevor-commercial-chopper-commercial-vegetable-chopper-w-4-blades-fruits-dicer-p_010148712974 Pegs are located 95.5 mm side to side from each other on center.…
Works with 3-yaw chuck that comes originally with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into every 3D model I publish for free download. If you would like to appreciate my efforts just buy…
There is a space between a collar and the body of the gearbox. This spacer fills the gap and helps to keep the collar parallel to the gearbox. Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work…
Gearbox of YS-2260A need zero-maintenance to work correctly. This washer helps to keep the knob parallel to the face of the gearbox and make operations more smooth. Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my…
Some basic covers for lathe bed rails to protect them from chips. Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into every 3D model I publish for free download. If you would like to…
A holder for popular 5W work lamp, which you can find on popular Chinese portals under "5w working led light flexible magnetic stand". Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into…
I was frustrated to see that the Vevor diesel heater air inlet was a special threaded attachment. This adapter will thread into the Vevor Diesel heater housing and adapt to the standard 3" or 75mm duct size. The adapter also aims to take…
A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920, tested with the Logitech Driving Force shifter. but should also work for other shifters with table clamps, alternatively the model can be edited to punch some…
This is a holder for all the accessories of the Vevor belt grinder for 762x25,4mm belts. It includes a cover and a section for the belts with flexible labels. The holder will be positioned behind the belt grinder and uses the holes of the…
The part is the one shown in the photo. The Vevor wet/dry vacuum cleaner is this one. Unfortunately, the original Vevor part breaks due to wear and tear and poor resistance, allowing the cleaning fluid to leak out. I printed the part…
Instead of wall mounting your vevor filament rack, print the feet and use it as a standalone unit. \ Printed in PETG, you will need x 2
Holds the vacuum hose on Vevor HF Spindle. You need to drill 4 extra holes in the spindle body and tap it with M4 thread.
If you need a direct exhaust for your diesel heater, here's one I made for my needs, and I decided I'll share it. I got it printed using ASA, due to high temperature resistance which is necessary, with opened printer and it shrinked 1mm,…
Nohy s patkami pro nezávislé topení Vevor kompakt 2kw bílý,rozteč šoubů M5 do L 30mmx30mmx30mm.
a mount for a small vevor polisher to mount it to the plastic shelf i use as a lapidary work surface. print out of the strongest materials you have and mount with some bolts
This simple shield slips around the front of your Vevor 1-ton arbor press and lets you operate the press with the shield in place. I made it to be able to crack walnuts without the shells flying everywhere. I printed this in PLA with a .6…
This part is an offset / spacer shim designed for the Vevor JH-1B multidirectional microscope . Its purpose is to slightly shift (de-center) the microscope position , making it easier to fit into your workspace and improving comfort…
Splash Pan centering device Vevor Potter's wheel 35 cm - LSFD-515 I bought a potter's wheel from Vevor (LSFD-515), but the splash guard has a little bit of play, which isn't ideal. So I designed this ring that fits under the rim of the…
Simple adapter to connect a DeWalt Stealthsonic vacuum to a VEVOR planer . Thin adhesive foam pad can be added for a tighter fit if needed, but it works properly as it is. A straightforward, practical adapter that gets the job done. ;)
This is my custom made tunnel that fits the Vevor Powder Coating Gun. This is slightly smaller than the Harbor Freight version. When installed with the new diffuser designs that are available, it will improve functionality of this tool.…
Small washer insert for 45 rpm singles. Use them to wash 7" vinyl singles in Vevor ultrasonic vinyl cleaner.
The Vevor Dust Cyclone (SKL300) claims to have 4" (100 mm) Interface but the tech spec describes as 3.81" (97 mm) which makes the hose connection rather loose. As the original outlet is quite short and gives not much area to fit a clamp…
This is a model of plastic vise jaws cover for a Vevor 4 1/2 In vise. The interior dimensions are 115mm length, 15mm height, 2mm depth, and 0.07 tolerance. The magnet holes have a diameter of 10mm and depth of 1.78mm. I printed it in PETG…
