1 / 3
Vevor Mini Metal Lathe Chuck Key Wrench Holder — image 1
1 / 3

Vevor Mini Metal Lathe Chuck Key Wrench Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Easy to get to storage place for the chuck key.

Rating
0 / 5
Likes
11
Downloads
53
Makes
0
Views
232
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

As a retired machinist most lathes I ran had some type of chuck key holder, always metal, that someone made. I wanted one for this home lathe to prevent it from getting misplaced. It uses the same screws that hold the gear cover plate minus the washers. I made the holder to go as far over as I could to clear the back shaft hole. If you run material outside the back hole I would suggest removing the key. Even a small diameter rod could sling to the edge of the hole when running and hit the key.

I used standard PLA setting except for 4 walls and 25% infill. The best matching color was by Duramic 3D, Electric Blue from Amazon.

Tags