1 / 1
Drain elbow for Vevor 6L ultrasonic cleaner - 3/8" BSP thread — image 1

Drain elbow for Vevor 6L ultrasonic cleaner - 3/8" BSP thread

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Extend the drain from a Vevor 6L ultrasonic cleaner so it can drain into a sink.

Rating
5 / 5
Likes
12
Downloads
51
Makes
1
Views
200
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

The Vevor 6L ultrasonic cleaner has a brass ball valve with a 3/8" BSP thread - that's an untapered thread with a 16.6mm major diameter with a 19tpi pitch. While the cleaner comes with a fitting that attaches it to included hose, I have mine right by a sink so don't need that and created this small elbow to allow it to drain nicely into the sink.

While this is designed to fit the Vevor 6L, it should fit anything that uses a 3/8 BSP female thread. In the US, that should be pretty much nothing, but it might be more common in the rest of the world.

Printing instructions

Prints with the threaded portion on the print bed. I used an inner and outer brim but it didn't seem like that was completely necessary. Printed as recommended, it does not need any supports. I printed in PrintedSolid Jessie PETG (mystery orange) with a 0.2mm layer height (0.4mm nozzle) and two shells, but pretty much anything is going to work here. On mine, it started to tighten just as it was almost pointing down, so I was able to get it tight and pointing down, but no idea if that's going to work the same for your printer.

Tags