1 / 1
VEVOR 2.2kW ER20 24000RPM 400Hz square spindle 80x80 cooling fan adapter and cap — image 1

VEVOR 2.2kW ER20 24000RPM 400Hz square spindle 80x80 cooling fan adapter and cap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

VEVOR 2.2kW ER20 24000RPM 400Hz square spindle 80x80 cooling fan adapter and cap

Rating
5 / 5
Likes
2
Downloads
15
Makes
0
Views
220
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Public Domain

Hey makers!

Brief
I'm sharing an 80x80 cooling fan adapter and cap for the VEVOR 2.2kW ER20 24000RPM 400Hz square spindle.

I haven't had a chance to test it on the other square spindles from VEVOR, but very likely this adapter will work on the other spindles as well.
 


Purpose
The purpose of this fan is to achieve forced cooling of the spindle.
Usually air-cooled spindle has a fan attached to its rotor.
Cooling capability rises with increasing rotating frequency.
This is why manufacturers do not recommend lowering a certain speed to prevent spindle overheating. Occasionally we'd like to go lower recommended value. This is why we'd like to have forced cooling on the spindle.


Printing
It prints fine without support.
I've printed it using PETG on my Bambu Lab X1C with a .8mm nozzle, but you can print this with a filament and nozzle diameter of your choice.
 


Assembly
Both the adapter and protective cap have 4 holes for M4 brass inserts.
Keep in mind you'll have to modify the fan mounting holes to make them aligned with M4 brass inserts. All you have to do is just file or dremel them to an oval shape close to the center of the fan.

There's a list of extra parts required to assemble everything:
- M4x10 screws (8pcs)
- M4 brass inserts (8pcs)
- M4 washers (12pcs)

8 screws and 8 washers are used to assemble the fan with adapter and cap.
The rest 4 washers are used to secure the adapter to the spindle.
 


Fan recommendations
I've got a 230VAC 50m3/hour fan, but any other fan with the same dimensions will work.
You can get DC-powered fans as well.
The main parameter you should pay attention to is the fan's volumetric speed.
It's always better to get a fan with a higher volumetric speed.


Final thoughts
Don't hesitate to share ideas on how to improve design.
I'm working on version 2 using a ducted fan.
There are available impeller motors with speed control relatively cheap and most importantly fit our dimension constraints.


Enjoy


 

Tags