Counting matching models…
I haven't been able to get one of the Jenkins Spindles for my wife so I figured I'd design one myself. I took inspiration from their designs and from Snyder Spindles. There are three sizes of spindles. I believe the large is similar to…
Designed to be an easy way to hold my AltMill touch plate lead, and spindle wrenches. The back is designed to house a washer, or other piece of metal, for the magnetic lead to connect to. Uses two M6 screws and roll in M6 t-nuts to attach…
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
I haven't been able to get one of the Jenkins Spindles for my wife so I figured I'd design one myself. I took inspiration from their designs and from Snyder Spindles. There are three sizes of spindles. I believe the large is similar to…
Stop throwing away your empty eSUN filament spools ! Give them a second life with this custom-engineered wall mount. This spindle is designed exclusively for the specific core dimensions of eSUN spools, transforming your "trash" into a…
A simple spindle for yarn that does not require bearings. and uses very minimal supports. The spindle part is kind of thick, but I mainly use it with yarn cones. That being said, I have stabbed skeins, balls, and cakes on it before and it…
Cover for the 500W spindle PSU, wide variant with cutouts for cable glands.
These adaptors will allow your spool to spin so much smoother. I have made two models - the first will can be pressed into a spool center of 60 to 75mm with ease. It has 20 spokes. It requires quite a bit of finesse, but I did fit it into…
Print with 100% infill Enable supports Reuse original Powermatic screws + M3 X 30 for hinge + 3X12mm Magnet
This a super basic 4030 Desktop CNC Router Design for 65mm Spindles, eg a Makita Router or 1.5kW Air-cooled VFD unit. I'm publishing this due to a request, however it doesnt fully match my current machine spec, and may be incomplete in…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
The intent was to be as close to original in the design. The original threaded rod is M10x1.5, but I was unable to get a full-length threaded M10 bolt that long. My gate can fit either 3/8 a 7/16, with 7/16 being very snug. Hardware…
Sorry, we don't remember the label printer model becuase we designed it long time ago but we share it for if it works for you We would appreciate you if you commented the model of the label printer It is used like part of the mechanism of…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
A modular Fehlmann SF32 drill spindle mount with an ergonomic angle and a spacing that allows easy access. The modules can be clipped together (needs some force) and have 4 4mm holes on the back for screw attachment. If the dovetail…
These parts are used to implement a spindle encoder on a 9x20 lathe using an Omron e6b2 encoder. This is useful if you are using a CNC conversion of the lathe. The LatheSpindleGT2 print replaces both the spindle gear and spacer. (assumes…
Description 52mm Spindle Adapter for OpenBuilds CNC This model is a structural 52 mm spindle adapter designed for OpenBuilds-based CNC machines . It was developed with a strong focus on mechanical rigidity , dimensional stability , and…
Louet spinning wheel, replacement part. Slot where the spindle sits, and attaches to the tower. Printed 100% solid. I used PLA but PETG or a higher melting temperature might be prefered. I haven't tested it on fast plying.
insert plate which should fit most spindle sanders - tested on HBM Print Settings PLA+ simple support needed 0.4 nozzle 4 wall lines 25% infill 5 bottom and top layers Disclaimer 1. Digital Quality & Compatibility This model is provided…
A fully print in place toilet paper spring-loaded spindle. Use PETG or similar materials, I don't think PLA will be suitable, is to rigid. It needs support, but ONLY IN BED, the spring does not need support. I also use raft for the base.…
The original model was listed as “no hardware” but I felt it could be improved by adding some inexpensive roller bearings. So, that's the only hardware added. I made following modifications to the original model: - expanded clearance to…
High-friction engineering filaments on cardboard spools kept binding in the dryer while printing and failing prints when the extruder couldn't pull harder enough. This is a quick fix, implementing 2x 608 bearings to smooth out the feed…
This spacer centers the embroidery thread spool on the sewing machine thread spindle. It was dimensioned for Isacord embroidery thread but will likely work with many other thread spools of similar design. It has a loose fit (a snugger fit…
I don't like how the spool sits on the original Spindle so I adapted my old design to work with the Stock mount and also with https://www.printables.com/model/698864-anycubic-kobra-2-max-spool-kobra-2-plus-kobra-max- This Should fit most…
Pretty much print and play. I consider it sacrificial so I've printed a few an I will replace them if and when they get chewed up.
Here's a spacer to accommodate for the extra width of the 30602J bearings when installed on mini lathes. Dimensions are based on the real spacer with 1.5mm subtracted from the width, so fit is just as sloppy as the real one. ABS is…
I couldn't find a model for my unknown lineage CNC 3018 that would fit onto the spindle assembly and that could accept my Craftsman shop vac hose so I created this. It is designed to fit on a CNC 3018 with a 42mm diameter spindle motor…
You'll want to print with supports for the raised edge.
This mount allows the fixed and mobile bases from the original model to mount onto an MPCNC Primo with a 55mm spindle.
Spindle nut for the Universal Spindle holder that works with the Voron Antlers
https://www.paulimot.de/hoehensupport-fuer-drehmaschinen https://www.wabeco-remscheid.de/bohrstander-zubehor/zubehor/drechsel-zubehor/spannvorrichtung.html…
This is a spindle and/or laser holder for a small CNC (SainSmart Genmitsu CNC). It is for use when you swap out your spindle for a laser and you need to store the spindle (or vice versa). It should protect them well, including the lens on…
When looking at the machine, make sure the fan blades are slanting from top left to bottom right as shown in the picture. There is now a shouldered version stl if you are having issues with the fan sliding up the spindle
This was designed for the Black and Decker mixer M100-BR. Printed in PETG No support needed Nozzle: 0.4 Layer high: 0.2 Perimeters: 3 Infill: 0 Speed: 50 mm/s
Using the MMU with my Prusa MK4, I was having issues with my filament spools being pulled off the wheels that they rest on and causing the prints to fail as the filament was unable to be fed to the extruder. I hadn't had any print issues…
Spindle holder insert for Genmitsu 3020 PRO v2 CNC machine. Designed it to hold laser that was smaller than spindle diameter. This adaptor is compatible for 43mm and smaller. Wall size is 3.5mm.
Custom adjustable holder for Saeshin Strong 210 spindle. Both pieces need support for printing. Nozzle 0.4mm layer 0.2mm Infill 100%. The older version breaks in some situations so I've added an M4x17mm flat head screw and m4 nut to…
Designed to be an easy way to hold my AltMill touch plate lead, and spindle wrenches. The back is designed to house a washer, or other piece of metal, for the magnetic lead to connect to. Uses two M6 screws and roll in M6 t-nuts to attach…
This small but extremely useful tweak to Machineboyzach's excellent spindle design extends the stabilization pin's hole by 5 mm to allow reuse of the stock metal pin. Printing on my Ender 3 V2 with Inland ToughPLA required XY hole…
I have a lot of semi-short yarn to rewind. The tube original spindle is to large so I remix it to a smaller in diameter. I have provided the fusion 360 file to edit to your needs
quick fix for the car plastic shield is wife wont complain about the noise Print Settings Printer: Anet A8 Rafts: No Supports: No Infill: 20 Category: Automotive
This is a great replacement spindle fan for the popular 500W spindle. I own 3 of these spindles and none of their fans were balanced and caused vibration affecting the quality of the cut. I printed mine out of PLA at 30% and it seems to…
Modified to fit the Little Friends Landmark Animal Cage bars spacing and wheel spindle length/thickness. After printing my own, I recommend printing on its side and using supports, the STL loads in this orientation by default. This will…
Tool mount for a generic 55mm spindle, compatible with the dust shoe from the Makita mount. Printed in PLA-CF but should print fine in pretty much anything. (Excuse the very dusty pics, I'd been doing some routing sans dust collection.…
Cover for spindle of old Atlas lathe. Its usefull whenn need doing someting with MorseTapper and dont want damage thread on spindle when acidentali trop someting metal on it. PLA with higher infil, like 40-60% is okay for that cover.
This is a printed spindle nose protector for a w25 spindle lathe (some Schaublin 102vm's and the 120vm among other machines) Print it threads down, no support and it will work just fine.
fits https://www.aliexpress.com/item/1005002037282584.html bolt distance is 80mm
In a cruel twist of fate, and despite being packed in the original box inside another box with padding, Icelandair's baggage handlers managed to break my Turtle Beach VelocityOne Flight yoke. The part that broke on mine is pretty…
I made this to hold delicate parts on the lathe. I print everything at 100% and then turn the inside to the correct size. the ring on the outside compresses the inner portion to hold the parts. I used PLA although I would suggest…
Le vase « SPINDLES » que je vous propose a été obtenu en retournant vers l’extérieur les sections de vase obtenues en divisant celui-ci verticalement et horizontalement. La photo de présentation est une image de synthèse, mais…
Print these with at least 3 walls and 3 top and bottom layers. Print one bottom and 3 sections. There is an OD taper on the section which goes down, I suggest you use a brim to help keep it on the bed. After printing glue the sections…
This is a parameterized spindle for storing CDs / DVDs / Blurays with a screw-on top to prevent the discs falling off. It fits all the disc types listed above and has a small bump on the bottom so the bottom disc does not scratch on the…
covers the connectors of the power supply from those chinese 500W spindles so you don't accidently connect yourself in parallel with your house's 230V circuit ⚡
We had a difficult time getting the files to make a spare dust shoe, so we downloaded them from OnShape, resized them to the appropriate size (100%), and re-exported them in a ready-to-print size. They're easier to find, download, and 3D…
This design will fit spool with center holes from 80mm down to 36mm. Uses 2 6200 series bearings instead of 4 like the original. The idler end bearing holder is attached by a M5x25mm cap or counter sunk screw. And for the driven side use…
BBLamsL_Sunlu_Spool Holder v2 Use on any AMS lite. This has a tab included to prevent original spindle from slipping out. The tab has a 5mm gap of play so you can push the original spindle out and twist using the gap for finger grip which…
An CARVERA (by MAKERA) accessories holder V2 - added 3mm collet and
This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.
This adapter is for the ORIGINAL donor spindle of the pastamatic. It accomodates 72mm center bore spools as pictured (mainly older Sunlu spools).
The scale ring contain a hexagon with a size of 10mm to drive a screw head. To get a clean lettering, the digits are connected by a ring which ensure continious flow of filament. Choosen size of the digits enable two perimeters to avoid…
a dummy spindle adapter for mounting a Sharpie fine point Permanent marker. Ive attached other adapters for the following other marking pens: Sharpie Ultra fine point marker Bic Round Stic M ball point pen Shaper Trace Artist Pen.…
The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…
Inspired by the Abbey Bike Tools Saddle Height Bullet (part of their Fit Kit ), these tools are inserted into the end of an installed bicycle crank and allow for easy and consistent measuring of saddle height. Improvements from the Abbey…
These are 2 alternate options for holding the toilet paper with the Lego man TP holder. One is intended to look like the old school Lego antenna peice, the other is a rod with a locking end cap. Both are designed to work with the hands…
printable as is, inner part of spindle should be printed with support
My wife observed the original dowels were too large for some of her thread spools. She also noticed the thread sometimes snagged a bit on the squared off edge of the dowel. These fit all her spools and print quickly. I print them with an…
This is the enclosure I made for my spindle speed controller for my shapeoko CNC to control my makita router speed. Watch in use :…
This has been remixed for use with 1.5/2.2kW 65mm VFD Spindles and normal 1.25" / 32mm Internal Diameter size vacuum hoses and to use readily available 12.7mm x 3.175mm Neodymium magnets. Notes : Suction area has no reductions in size, so…
Lots of dial gauges seem to have a 55mm body and the back plate 8mm offset from the pin. My cheap (unbranded..) one certainly fits that category. This is a design to let me mount it in my CNC so I can level PCB's before cutting tracks…
A holder and guard for the unused tools in 1610 and other 2020 framed CNC rigs from china. Holds either the Laser unit or Spindle+chuck+tool when not in use. Deep body protects the toolbit etc, while still keeping it visible. Chunky…
A press-fit cover for the standard 42mm spindles that come with cheap CNC's like 1610's etc. Protects the terminals and provides a outlet (either side) with slots so a cabletie can be used for strain relief. Needs support to print due to…
Do your old door handles jiggle and make metal-on-metal sounds? This grommet fills the space to eliminate play and noise.
redrawn from ground up, because I'm using an different “grid connection" at the bottom. New width of box is 50x75mm. Changed some small chamfers to make printing easier.
This is a remodel of my Avid CNC Dust shoe that has been modified to work with an 80mm spindle. The skirt is in two parts so you can remove the front half to do a bit change without having to remove the full skirt. I chose to use Magport…
A cap for this standard spindle design. Print as oriented in the stl, delete whichever style you do not want; the hole is sized for a 20x12mm rocker switch. Fit the lower half, I use a tight cable-tie to get a good fit. There are no…
Tool mount for a generic 52mm spindle, compatible with the dust shoe from the Makita mount.
M33x3,5 to safe the spindle thread and your fingers.
3 separate pieces print what you need! :) SPINDLE CLAMP for 65mm trimmer (MAKITA, KATSU, CLONE etc) for CNC Twotrees TTC450 DUST SHOE for ALL 65 mm trimmer Suction ADAPTER (internal diameter 39.2 mm external diameter 43.2 mm) designed to…
I recently picked up a TwoTrees M1 Vac for my Anolex CNC but found the bolt pattern on the shoe doesn't fit my 1.5kw spindle. I wanted to use the auto start/stop function of the vac and the LED lights/magnetic mount were nifty, so I…
Magnetic Dust Shoe for 44mm Spindles Designed to fit common 44mm spindle size found on 3018 and related desktop CNC routers Vacuum inlet designed for common 1.25" / 31mm shop vacs Magnetic bottom allows for quick removal when changing…
