Spindle Rod Foot and Nut for Pet or Baby Gate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Foot, nut, and wall mount for spindle rod of a dog/baby gate
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The intent was to be as close to original in the design.
The original threaded rod is M10x1.5, but I was unable to get a full-length threaded M10 bolt that long. My gate can fit either 3/8 a 7/16, with 7/16 being very snug.
Hardware Required:
3/8 hex nut (Home Depot SKU ACD)
3/8 x 3-1/2 hex bolt (Home Depot SKU AZB)
Files
wall_mount
Allows for double-sided tape or a countersunk screw
foot_covered
If printed in TPU or another flexible material, a bolt can be installed securely in the hex pocket
Fits a hex bolt head that is roughly 14mm (flat to flat) and ~6mm tall
foot_open
Allows for the bolt to sit inside the hex without being covered
Fits a hex bolt head that is roughly 14mm (flat to flat)
nut
Fits a hex nut that is ~14mm (flat to flat) and ~8mm tall.