Counting matching models…
A cap for the top of a bifold door that holds the two panels open at 65°. Fold the door to about 65°, then press the holder down over the top edges at the hinge. Fit For panels 35 mm thick, hinged with about a 5 mm gap between them Slots…
About I used hole in the doors of the Original Prusa MINI Enclosure as an entry point for filament PTFE tube. Moved handle for fingers a bit lower, and added magnetic coupler in there for s 6x2mm magnets, which are popular in gridfinity…
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
A drilling guide for door handles. It's slightly parametric. Here is the link to the Onshape project:…
a Simple door stop. Print on sides. Glue some rubber/felt on the bottom surface.
Handles for Skånska Byggvaror Outdoor parts Intended to sit on the inside of lot with fitted outside original handle. With the handle, you get a grip to push the part from the inside. The handle does not prevent the parts from being…
Changelog: Intro This is the Breezebuggy, a high performance ride-on outdoor use play car intended for children ~3-9years old. The car has been thoroughly tested and iterated upon to reach a high level of maturity in printing, assembly…
The original was a bit tight so i just moved the faces to make it fit better. made it so you can mount the thermostat in any corner.
Meet Figure the Clockrider, inspired by the latest update in 'Roblox Doors.' This unique 3D model showcases a mechanical figure perched atop a whimsical alarm clock. Perfect for fans of the game and collectors alike, this model is ready…
“Take your wine camping, on a picnic, or to a festival. These lightweight, nesting wine glasses go anywhere with their unique stem design that unscrews and allows the bases to be compactly snapped into the bowls for storage. Super…
I designed this towel hook to test the ability of my new MK4s with overhangs. The overhang has 70 degrees and works perfectly! There is a single towel hook file, which can be combined in prusa slicer to an arbitrary number of connected…
VZBOT 235 AWD - 180° door hinges for CNC kit The original hinges loosened very little and interfered with manipulation around the printer. The remixed model was for the printed version with 2WD, this one is on AWD - CNC kit. In addition,…
I am trying to create a dry box within an Ikea closet. Apart from a way to remove moisture, I needed to seal the edges. However the seal kept the door open. Since my closet dry box is experimental, I did not want to commit on an…
This fits: https://a.co/d/5D6Wu38 Depets Large Cat Door (Outer Size 9.9" x 9.2"), 4 Way Locking Cat Flap Door for Interior Exterior Doors, Weatherproof Pet Door The Depets door fits 1-1/4" thick doors. This extension makes it fit 2" thick…
This is a magnetic mount to allow easy repositioning of a Ring Indoor camera, uses two 8 x 25 x 2mm magnets. I've included a Fusion 360 file so if you want different magnets it is easy to do, if the new magnets are rectangular just change…
Amiga 500 Trapdoor 2 switch for 1Mo chip Ram. Mini Interrupteur à Bascule: https://www.amazon.fr/dp/B0BTM3WQXN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 M3 Vis:…
Did you find yourself inheriting a door that previous owners had installed a cat door? Yeah…. me too. This is just a simple design to cover the 7" hole in the door. I didn't put too much time into it as I needed it pretty quickly in order…
Hey everyone! After a long time, I’ve crafted a door sign again, and this one is specifically for all the passionate gamers out there! This sign is a fun way to express your love for gaming while adding a personal touch to your gaming…
Hey everyone! Do you have a baby at home, and is someone constantly disturbing their peace? That’s exactly why I created this simple door tag that’s not only practical but also fun! This sign clearly indicates when it’s a good time to…
This is a gable mount for the outdoor govee lights square model Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Filament:** Creality PLA, PLA+ white Notes: The gaps are a bit tight. I am sure you could…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Mount an IR interruptor sensor at car bumper height. The sensor will turn on a lamp when IR beam blocked. Used for backing into the garage so the bumper will clear the garage door. Back the car in until the lamp turns off. The 3D part…
Handle for The T1/Pro The uploaded orientation is intended to have a clean, visible surface, but of course, it can also be printed differently without supports. Unfortunately, my printer didn’t come with a handle, so I quickly created my…
V1 is with a printed push pin, printed with small pin up V2 use a back end of 4,5mm drillbit, cut/saw the drillbit to 30mm length glue it in, printed with the hole down printed in abs, do not use pla because its in a vehicle(gets too hot)…
A simple bucket to install on the kitchen cabinet door, we use it for storing our dishwasher tableds in.
My storm door has a broken retainer clip that does not extend the entire height of the door. As a result, there's a drafty spot in the gap. This part fills that gap by extending the existing retainer clip. I needed about 103mm to fill the…
I couldn't find a door prop I liked for the fridge in my camper, so I made one. This latches into the catches on the fridge and the door pins, creating a pretty sturdy arrangement that will allow the fridge and freeze to breathe to…
Suggest printing out of PETG or other UV resistant filaments. Designed to fit nicely around 50x82mm button.
Made them for 3mm Panels and much more Clearance (~0.3-0.5mm)
Door stop for furniture with cupboard. The original part broke so I designed a simplified version. Screenshot from slic3r for sturdy print direction for the peg.
Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.
Top Door Hanger with the Fusion360 File so you can modify it for your need.
i have a 2 year old that can reach and unlock my door, whilst i could set up an automation to stop this thats just annoying as then we cant leave the door unlocked when we want to. so i developed this (my first 3D model) a simple cover…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Battery door lever for the Olympus E-M5 III because it keeps breaking for everyone!! Remixed from @myxfit_28243 's model to fit the E-M5 III instead of E-M5 II Notches are raised by 0.5 mm to accomodate the locking lug + spring see pic 4…
1st picture is result in white PLA. 2nd picture shows position on printer. 3rd picture is original part from furniture. 4th picture with blue background was Original picture I used as support picture in Fusion 360
I wanted something simple to hold the door when it's all the way open with the 270 hinge mod. The original by Derrick printed great, but I discovered it doesn't work with the version of the hinge I printed (Diablo's + my own remix). The…
Smart Automatic Closure: Automatically opens and closes when an object is detected at a distance of 10 cm. Easy Installation: Compact design with 3D printed casing for fast and easy assembly. Energy Efficiency: Powered by rechargeable…
Cover for holes in door/ window plastic frame. I used Nano Tape Double Sided Tape to glue it.
Great over-the-door hook. We use it to hang our Leifheit drying rack inside our utilities room and for various other things
Ikea Styrbar FB Halterung für Kallax, Billy und Expedit Türen. Ikea Styrbar bracket for Kallax, Billy and Expedit doors.
I tried models from other creators, but they didn't fit as I wanted, made my own.
I wanted to bring new life into a Outdoor Christmas Wreath I had. So I created this clip to allow for the replacement of dumb lights that it came with to be powered by WLED.
Prevents my garage door from running into the enclosure door. Reuse the original stopper/magnet assembly. Add one M4 fastener per side. Printed in PLA.
1:20 - around stables for animals around 10-14cm in height. Actual size 300x220x160 mm for walls, and 330x260 mm for roof. All parts can be done without supports. Major parts done on Prusa XL 0.6 nozzle 0.4 layer, and used layer modifier…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
The hook keeps the door of the charging port of your ID.4 a little less wide open when charging. This protects the door better from accidental damage, such as breaking off because it was too wide open. There are two versions. One for…
Printed using ABS, PETG could work too. Designed for 3mm enclosure panels on 2020 extrusions. Print settings used: 3 walls at 0.42mm outer wall and 0.6mm inner wall Print 2x of the latch handle and latch base. Requires 2x M3x6mm screws to…
no suport needed, print as is ABS is better, i used Petg
The Lost Cap Replacement cap for standard door spring stoppers. 3D printed with TPU for flexibility and durability.
EN: The door wreath, which we had attached with decorative ribbon, kept coming loose because the adhesive tapes were slowly coming off due to the pull. As I didn't want to damage the door by stapling it, I came up with this device. It…
!!! This model is still in progress - I am adding new models/info !!! ------------------------------------------------------------------------------------- Background/What is it? In my leasure I like building simple cabinets, wardrobes,…
This part is designed to carry Aqara's Zigbee Door/Window sensor and recess it as subtly as possible within either the door frame or door. Installation of the sensor into the door frame avoids mortising the door and potentially…
Woodford Model 17 Sillcock handle. Included the .blend file. Category: Replacement Parts
An upgrade on the DoorStop by @Syd_334291. Optimised for larger gaps and thicker carpets
One of the guys in my house is a big Broncos fan, so I made this for his closet doors.
Behold the simple doorstop. It is simple to print and even more simpler to use. Not much more to say really. It's a doorstop. Print it in yellow and it becomes a wedge of cheese. Category: Office
The perfect solution for smart and stylish storage! The STYLE COLLECTION HOME door hanger is an elegant and practical accessory that easily hooks over any door—no screws or installation required. Use it to hang bags, clothes, or everyday…
This 3D model is a practical and space-saving screw-on support designed to hold a roll of transparent film (cling wrap) on your kitchen door. It’s perfect for keeping your film within easy reach while cooking or food prepping. The support…
This 3D model is a practical and space-saving screw-on support designed to hold a roll of baking paper on your kitchen door. It’s perfect for keeping your baking paper within easy reach while cooking or baking. The support is sturdy, easy…
I had some bi-fold closet doors break on me one night and it was too late to go to the hardware store. I designed this, printed in PLA, and installed it and it held up for about 2 years until I overextended the folding doors and it…
If you are a HiTechPet door owner, and you live in a part of the country where there are seasons, you have probably experienced the occasion where the door opens and get stuck at the top of its travel. This simple spring / stop prevents…
Simple screw covers for HiTechPet dog doors. Often one breaks these when removing the door for service, painting, etc. OnShape:…
This is my version of a hinged holder for the Aqara door and window sensor to be mounted on a garage door. It uses a piece of 1.75mm filament as hinge pin. I made the clearances fairly large to ensure easy swing since the magnet is quite…
It's just a basic door stopper. ( It's my first model so that means it's not the best. )
I made it with multicolor, it looks much better that way. Should I make a curious light crucifix?
Hello there, I made this handle for my daughter since the original IKEA handle broke. She painted hers with melted cryons but whatever method is fine. Its easy to print and it works fine so far. The hole distance is 128mm.
This model can be used to create a depth stop for old indoor keys to stop the key from overpenetrating the lock area. Print with a filament of your choice. Currently there is only the model KeyDepthStop_KeyWithFlatPortion , that can be…
Picture of the final build will follow This is my version of the TFT50 Screen from BigTreeTech. Ive added a magnetic mount so the screen can be easily removed for maintenance. It is also compatible with the Clicky Clacky Door. It useses…
edited parts: BL - Outside Door Block V4 - tested on my enclosure with mk4s BL - Long Outside Door Block V4 - not tested yet Printed with PETG. 0.4 nozzle, 0.25mm Layer For better seal of the plexiglass to the enclosure, i did put m3…
Due to the sad possibility of active threats in our schools, all doors must remain locked. Most single doors have a slim magnet that can be pulled to allow the door to lock. My classroom has double push bar doors and the slim magnet won't…
Hello everyone 🙋♂ This project is a sliding door latch that uses a hemp cord. It is designed to prevent my cat from attempting to access the sex-toys door. It is very sturdy, especially when printed in PETG, but it also works very well…
Fills the gap used as a handle on the door of the IKEA Alex cabinet. I've included STL's for versions with and without a handle, as well as the basic shape without the back plate if you want to do something else with it. I designed this…
Background: I have a multi-panel exercise pen made from heavy wire that looks like this: I wanted a way to secure this pen to a wall, while being quick and easy to remove the pen for cleaning or storage. This model attaches to a wall…
This 3D printable door stop is designed to keep your doors securely open while protecting your walls from damage. The solid, durable design ensures it stays in place and prevents doors from swinging too far. With its sleek, minimalistic…
G E R M A N Türgriffverlängerung für die Elia-Scheiben. Meine Frau ärgerte sich immer wieder, wenn sie mit der dicken Winterjacke die Türen öffnen wollte. Die Scheibe drückte ihr in die Achsel. Das sei unangenehm. Also entwarf ich auf die…
Update! Version 1.1 E N G L I S H Use at your own "risk". I have printed it from TPU 95A. 9 lines for wall 6 Lines for floor and ceiling. 25 % gyroid infill. THIS IS ONLY A TEST! Please find out the print settings that work best for you!…
I've designed this door hinge jig to make accurate routing for a standard 76x76mm a breeze. Works on both the door and the frame. Orientation shouldn't matter. Prerequisites Plunge router 30mm bushing 20mm routing bit (use a sharp one for…
If you make a large bugscreen, for a door, for example, you need some kind of reinforcement about the middle of it. There are no commercially available middle elements so you cannot connect the middle bar. I made this insert and you can…
Print the model using the included base to help secure it to the plate. Hold the pin with pliers and tap in with a hammer. Once the pin is steady enough to hold itself, use a finish nail setting tool and hammer to insert to the right…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an RC car RMT Land Rover T98 complete with doors and windows. They are suitable for beautifying your RC model. They are in 1:10 scale. No glue is needed for…
can can put inserts into doors from the inside, especially if you messed up bridging and dont want to reprint doors again. :) Mercenary landy kit is on Cults
I had the problem on the K1C of the tool head opening the door when homing, I don't wanted to cut the stock top hinge so I printed this piece 100% infill using ASA CF see original:…
