Universal camera platform and eufy indoor cam adapter for Prusa mk4
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.13 – €3.82 net (excluding VAT)
For file: Cameramount-PLA_0.4n_0.2mm_PLA_MK4_3h24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.47 excluding VAT (range midpoint).
- Weight reported by the author
- 45 g
- Print time reported by the author
- 3.4 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Webcam holder for the back of the MK4. Inclusive Adapter für eufy indoor camera
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 89
- Makes
- 2
- Views
- 955
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Webcam holder for the back of the MK4. Instead of the eufy adapter, other holders can also be subsequently attached to the basic holder with double-sided adhesive tape or superglue.
Print settings:
- PLA or PETG
- organic supports
- 0.2 layer
- 0.4 nozzle
- Print the holder with the height modifier from 0 - 4 mm with 100% infill and 3 perimeters