1 / 6
Improved hinges and Door handle for Lack enclosure V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinges and door handles with minimized magnet distance and mounting screws.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Door handles are a custom design with:
- Magnets very close together for max strength
- The same 20×6×2 mm magnets as the rest of the enclosure
- Printed screws
Hinges are modified with:
- Reduced magnet distance
- Printed screws
- Allows moving the panel slightly further to the outside
My panels were very close together in the middle, so the version of the handle with no_divider allows moving the hinges right next to each other, while the regular version will add rigidity, but only works, if there is a slight gap in the middle between your door panels.
Also includes some seals for the sides, to remove airgaps.
Printed in PETG