1 / 5
Trappe à pile pour console Bandai champion racer - Battery Door for Bandai Champion Racer Console — image 1
1 / 5

Trappe à pile pour console Bandai champion racer - Battery Door for Bandai Champion Racer Console

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Trappe à pile pour console Bandai champion racer - Battery Door for Bandai Champion Racer Console

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Il faut imprimer la trappe coulisse vers le haut. Pas besoin de support mais il faudra bien gratter les coins pour un bon ajustement.

La partie OPEN est fournie dans un fichier SVG annexe. Pour le mettre en place utilisez clic droit sur la surface puis insérer une pièce et choisir SVG. Modifiez les paramètres sur creuser et épaisseur 0.6mm.

Imprimez avec une buse de 0.2 mm.

_____________________________________________________________________________________________________

The hatch must be printed with the door sliding upwards. No need for a support but you will have to scrape the corners well for a good fit.

The OPEN part is provided in an attached SVG file. To set it up, right-click on the surface, then insert a piece and choose SVG. Change the settings to dig and thickness 0.6mm. 

Print with a 0.2 mm nozzle.

Tags