DOORSTOP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We needed some door stops around the lab at work, so I went about designing one.
- Rating
- 5 / 5
- Likes
- 94
- Downloads
- 778
- Makes
- 20
- Views
- 2,012
- Reviews
- 19
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
We have several doors around the labs at work and we often need to prop them open. We had the opportunity to make some new ones, so I hopped on the computer, fired up Fusion360 and started designing. This doorstop prints well with a color change, however it is not necessary. I recommend printing with thicker walls for these, so my provided .gcodes have 5 perimeters and are printed at .3mm layer height. Not much to it, just slice however you see fit and hit print!
I typically design in imperial measurements. If a part comes in and it is too small, adjust the scale of that part to 2540% and it will be correct. Alternatively, in PrusaSlicer, you can right click the model and select “Convert From Imperial Units”.