Search results: doorstop

Counting matching models…

Printables

DoorStopV3

An upgrade on the DoorStop by @Syd_334291. Optimised for larger gaps and thicker carpets

Printables

This is a basic door stop. It works on carpet or surfaces with friction. The ridges on the bottom help prevent slippage. I printed this with 4 perimeter walls and the default 15% infill. You should print this on its side (the side should…

Order a print of this model

Printables

Low Profile Door Wedge / Doorstop – 1 cm Height (Scalable)

The model can be scaled in your slicer to perfectly match the height and length you need for your specific door. The wide contact surface ensures stability without damaging the floor. For best results, print it on a smooth build plate…

Order a print of this model

Printables

doorstop Türstopper

Description: Designed specifically for the FlexIt TPU Contest , this doorstop combines rugged aesthetics with maximum functionality. The unique geometric structure isn't just for looks – it allows the stopper to compress slightly under…

Order a print of this model

Printables

Anti-slip doorstop

Essencial things besides print: TPU filament 9x approx. 50 mm pieces super glue Print settings: filament: PLA layer hight: 0.2 mm infill: 15 % supports: No bed adhesion (brim, raft, skirt): No printer: Creality K1C After print you need to…

Order a print of this model

Printables

Simple doorstop for flat surface (NOT FOR CARPET)

This simple door stop prints without supports. The doorstop is meant to be used on flat surfaces like flatwood, tile etc. The hole in the design helps its strength so it doesn't break under immense pressure (it bends). the hole also saves…

Order a print of this model

Printables

Doorstop

This door stop is to prevent the roller blind from touching the wall

Order a print of this model

Printables

Doorstop holder

Doorstop holder for round inox and rubber doorstops filled with sand

Order a print of this model

Printables

Door wedge, doorstop, small and strong

Download the .STL file, slice it with your slicer, infill 20-25%. Block yours door in easy way!

Order a print of this model

Printables

Doorstop

A practical doorstop available in two printing variants so you can choose the ideal setup for your printer and materials. Both versions are designed for reliable grip on the floor and easy printing. 🌀 Variant 1: Full TPU This version is…

Order a print of this model

Printables

Rugged Flexi-Grip Doorstop | Anti-Slip TPU Design

Description: This doorstop combines rugged aesthetics with maximum functionality. The unique geometric structure (also inside) isn't just for looks – it allows the stopper to compress slightly under the door's weight. Use double sided…

Order a print of this model

Printables

DoorStop, door kick stop, best in TPU

This is a kickdown door stop best printed from TPU, 4 latyers with 15-20% infill. The base can be TPU or any other material (I like nylon).

Order a print of this model

Printables

Doorstop

The fusion- Solid Professor Doorstop model with slight modifications.

Order a print of this model

Printables

Honeycomb Doorstop

An simple doorstop with honeycomb pattern.

Order a print of this model

Printables

Doggy Doorstopper

Nice doorstop for your office door :)

Order a print of this model

Printables

Toothy doorstop

Now that your office furniture stays put on short pile Corporate-Grade carpet, those doors won't hold themselves open either. Like with the wheel chocks, there are teeth to bite into the carpet to keep it from moving. Print in provided…

Order a print of this model

Printables

DoorStop With Handle

Simple Print , Doorstop with a screw in handle in 2 parts. - I print the bottom part with TPU, the rest in PLA print the bottom with low infill for softer dorstop, - handle is optional.

Order a print of this model

Printables

Hinge Doorstop

Made this to keep the doors open just a little bit for our cats. This prevents accidental closing but is easy to remove because it's just magnets on the hinge. I recommend gluing the magnets in though as the fit isn't tight enough with…

Order a print of this model

Printables

Spring Doorstop

An doorstop with 18 springs. Printing Infill: 30% Supports: yes (only buildplate)

Order a print of this model

Printables

doorstop

I used Tpu 95a and i recomend cleaning the build plate before printing because it can warp. Created in Fusion 360 by: Michel Hoec

Order a print of this model

Printables

Curvy Doorstop

A curvy doorstop.

Order a print of this model

Printables

Doorstop

A doorstop.

Order a print of this model

Printables

Door on Pause Doorstop

Kids say what they think, even if you don't always understand what they mean right away. This model is based on my littlest girl's saying. "Can you make the door on pause". Okay. Challenge accepted. So, what about a doorstop in a remote…

Order a print of this model

Printables

Slide-on-door doorstop (parametric)

This little doorstop simply slides under the side of your door, if you get the parameters right for you door it should lock its position. The ends of the doorstop are slightly angled down to apply more force, to insert the doorstop push…

Order a print of this model

Printables

Smart Doorstopper (13mm thick)

Since my vacuum robot mostly treats the doorstoppers as obstacles I needed a smart solution: narrow stopper which is adjustable and doesn't need much space! So I designed this stopper : An excentric roll is turned up to 180°. Indicator…

Order a print of this model

Printables

Sisyphus Doorstop

Im the greek mythologie a man called sisiphus is pushing a rock up a hill, day after day, because it rolls back down all the time. I designed this doorstop so he can hold your door open everytime you want him to. There are two different…

Order a print of this model

Printables

DoorStop

This is my take on a modern DoorStop and my entry to the doorstop contest. Print the two parts and twist them together, put it under the door and screw up to put pressure on the doorblade to lock it in place. This version has a interval…

Order a print of this model

Printables

Doorstop Clip Latch

Ball clip door latch. Print the door side with supports. Wall side standing up. I've included 3 sizes of door, and the fusion file if you want to change anything. There are 2 versions of the wall side, one for screws or nails, one for…

Order a print of this model

Printables

Türstopper mit magnetischem Halter [Doorstop with magnetic holder]

Einfacher Türstopper in Form eines Winkels. An der Seite an der die Tür anschlägt ist eine Vertiefung für einen Magneten. Dieser wird mit einer Senkkopfschraube M4x16 an den Türstopper geschraubt. Damit die Schraube genügend Halt findet,…

Order a print of this model

Printables

Türstopper mit magnetischem Halter #2 [Doorstop with magnetic holder #2]

Einfacher Türstopper in Form eines Zylinders. An der Seite an der die Tür anschlägt ist eine Vertiefung für einen Magneten. Dieser wird mit einer Senkkopfschraube M4x16 an den Türstopper geschraubt. Damit die Schraube genügend Halt…

Order a print of this model

Printables

DoorSTOP

DoorSTOP - the ultimate functional yet aesthetic doorstopping solution. Guaranteed to start a conversation or at least get someone's attention if someone comes over. What it can do: Hold a door open Not slip on carpet or hard floor…

Order a print of this model

Printables

Doorstop Dog

Doorstop in the shape of a dog

Order a print of this model

Printables

Future Doorstop

With this tool you can halt door movement in futuristic style, by manually adjustment in spatial placement. The form intrinsically supports the use of elastic/rubber bands as floor-side grip, which also prevents any damage to the floor or…

Order a print of this model

Printables

Yet another doorstop

Fits on doors with a width of 40mm. Model is 60mm long. Model covers a gap of 15mm. At the bottom you can add some EPDM Adhesive Tape with width of 35mm and a height of 8mm.

Order a print of this model

Printables

Onepiece Doorstop

My Original project: https://makerworld.com/it/models/638010#profileId-563549 A simple 3D-printed floor doorstop , designed to be made in just 30 minutes using 6 grams of PETG filament, chosen for its flexibility. 2 sizes for door thick…

Order a print of this model

Printables

reinforced hook for Hinge-Clip Doorstop

remixed doorstop hook! LoboCNC's doorstop is very clever, but I've broken 3 of the hooks, so far—by forgetting that the doorstop was in place, and trying to close the door. according to KISS principles, rather than designing a complicated…

Order a print of this model

Printables

Easy to print doorstop

This is a simple doorstop that can be screwed to the ground. I designed it in Tinkercad to keep it simple. The doorstop is approximately 4 cm (1.57 inches) in diameter and about 2.2 cm (0.87 inches) in height. The screw hole is around 10…

Order a print of this model

Printables

Doorstop/BookStand

May need sups

Order a print of this model

Printables

Dog Doorstop

Dog doorstop made by a doorstop. He wanted to added for others to use as they wish

Order a print of this model

Printables

Doorstop

A doorstop which stops doors. Best if printed in Tpu, but pla works fine.

Order a print of this model

Printables

safety cleaning robot for doorstop

Avoid jams in the door stops of your cleaning robot. For 30mm elastic door stop.

Order a print of this model

Printables

Heavy Duty Doorstopper (Press-Fit TPU)

Print TPU with 3 walls and PETG inner part with 5 walls.

Order a print of this model

Printables

Doorstop

A simple doorstop

Order a print of this model

Printables

DOORSTOP 60mm tall

This is a simple doorstop that i made for pool gates. Most pool gates are compatible i said MOST!!!😉 Category: Accessories

Order a print of this model

Printables

WIP doorstop

just uploaded to collaborate

Order a print of this model

Printables

LEGO Brick Separator and Doorstop

J'ai gardé le design d'origine et modifié la pièce pour la rendre entièrement compatible avec les pièces LEGO Conseil d'impression : Hauteur de couche 0.1mm Support Activé sur le plateau uniquement Matériau conseillé : PETG / ASA / ABS I…

Order a print of this model

Printables

Aleph Zero Doorstop

Can be printed easily (best with TPU) to show your door who's the boss! Aleph Zero is a layer-1 blockchain offering scalable, secure, and low-cost solutions with near-instant finality and ZK privacy. Ideal for Web3 apps across DeFi,…

Order a print of this model

Printables

Lowpoly Pikachu Doorstop

ohne support druckbar. freecad datei dabei zum umbauen

Order a print of this model

Printables

Doorstop

Practical and aesthetic doorstop

Order a print of this model

Printables

Airflow Doorstop

For reasons I won't go into concerning air currents, there's a couple doors in my house that I normally want to leave just barely open, and occasionally close all the way. Using normal door stops was a PITA, so I did this abomination. A…

Order a print of this model

Printables

Hidey-Hole Doorstop (for TPU or similar)

Sometimes 3D printing can actually be quite practical! I needed a couple of door stops, the rubbery sort that you often find on doors that open into a tiled wall. I could perhaps have gone to a local hardware store, but I did have some…

Order a print of this model

Printables

Türstopper doorstop

Da der alte Türstopper für die neue Tür zu kurz war habe ich einen Zylinder mit Federelement konstruiert und gedruckt um das vorhandene Gummielement weiter zu nutzen. Mit Stützmaterial im Federelement gedruckt. Since the old doorstop was…

Order a print of this model

Printables

Doorstop with hanging option

Doorstop with hanging option for door gap height of 4 mm to 14 mm. It is best to print with TPU because flexible, and not slipping, gently for the door.

Order a print of this model

Printables

V76_doorstopper_V2

A door stopper with V76 written on it ... 170 mm * 30mm * 60mm

Order a print of this model

Printables

Football Doorstop

A football doorstop an extension of the bookmark we made Print the base in one colour and the white and black inserts in another and glue them all together. Solid stl included for those who would rather use a multi material print system…

Order a print of this model

Printables

Türstopper/Türkeil/doorstop

Türstopper

Order a print of this model

Printables

Modern & Minimalist Doorstop

This is a compact, modern, and minimalist doorstop. Print this in either PLA or TPU. If printed in a rigid material, this works better on carpeted floors, so for wood/tile floors TPU may be better.

Order a print of this model

Printables

A Modern Doorstop

A simple doorstop. There are to different files. The v2 is a little more flexible. Print settings .2mm layer 3 walls 15% cubic infill

Order a print of this model

Printables

DoorStopV3

An upgrade on the DoorStop by @Syd_334291. Optimised for larger gaps and thicker carpets

Order a print of this model

Printables

doorstop

so that the door handle no longer hits the wall printed in 100% TPU

Order a print of this model

Printables

Band-aid Doorstop

A doorstop for our school nurse. Made it shaped like a band-aid so others would stop stealing it. Printed with PLA on a Creality Ender 3 V3-SE no supports needed 0.2 layer height 4 walls 7 bottom shell layers 5% Gyroid infill

Order a print of this model

Printables

Doorstops in 3 sizes with less and more flex

Simple doorstop to be used on most self shutting doors. Works best on tile or a floor that is a little ruff.

Order a print of this model

Printables

Simple Doorstop

I printed this with 35% infill there is also a 3mf file with everthing all set. Happy printing

Order a print of this model

Printables

Doorstopper

This is a sleek and functional 3D-printed doorstopper, designed to hold doors securely in place. It features a sloped wedge shape with a rounded top and a textured, ribbed surface for added grip. The doorstopper is printed in white…

Order a print of this model

Printables

Doorstopper

It's a simple fast print doorstopper.

Order a print of this model

Printables

Türstopper | Doorstopper

Der Türstopper ist schnell gedruckt und funktioniert gut. Die Oberfläche ist für einen guten Halt geriffelt. Ich habe den Türstopper aus PLA gedruckt. Viel Spaß

Order a print of this model

Printables

Windowstopper / Doorstopper

I' made this because my window didn't stay opened when I tried to let some air in at the morning. Hint: Take a fill off at least 50%. Otherwise, as in my case, the stopper can be dented / impressed. Print instructions Category: Household…

Order a print of this model

Printables

Universal Small Doorstop (1g)

mount with double sided tape or glue. print with supports on build plate only.

Order a print of this model

Printables

Modern Toothed Doorstop | Home Decor | Living Room | Household | Door Wedge | Doorman

What is it? This modern Toothed Doorstop is a great addition to any room and can fit in anywhere with its sleek modern design. Where else can you access this model and others? This model is also available on our Patreon as well as many…

Order a print of this model

Printables

Türstopper - Doorstopper - Door-stop

Türstopper, wird am Boden angeschraubt. Originaldurchmesser 50mm, Höhe 30mm. Falls der Spalt Türe-Boden weniger als 5mm ist, muss der “fixe Teil” beim Slicen unten etwas abgeschnitten werden. Der flexible Puffer schon die Türe. Um bei…

Order a print of this model

Printables

Doorstop / Türstopper

An other version of a doorstop.

Order a print of this model

Printables

⇀ Dragon Doorstop ⇀

A cute way to keep doors in place. Rounded model with no sharp edges. Kid friendly. Tail keeps doors in place. Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…

Order a print of this model

Printables

Gnome Doorstopper

Simple gnome door stopper.

Order a print of this model

Printables

Doorstop

Simple doorstop that attaches with 2 screws to the floor, 50mm in diameter. Mine are printed in PLA and hold up just fine, might want to increase perimiters and infill to strengthen them though. Smaller pin is a tight fit to keep…

Order a print of this model

Printables

Doorstop HODL Hodor Bitcoin zarážka dveří

Doorstop for Bitcoin hodlers. Zarážka dveří pro hodlery.

Order a print of this model

Printables

doorstop

cool doorstop

Order a print of this model

Printables

Another doorstop

One doorstop more There are nearly infinite different models of doorstops to find. Anyway, after I tried some designs unsuccesful I ended with designing my own. Works great for my doors. Sizes 2 different sizes published, one for doors…

Order a print of this model

Printables

Doorstop

Order a print of this model

Printables

Doorstop for PAX cabinet

This was a very basic model created in Tinkercad to keep the door of my IKEA PAX cabinet open while printing PLA. Nothing special, but it was very quick to design and print.

Order a print of this model

Printables

IKEA Patrull doorstop - foot covers

I made these for my own use and thought I might as well share it. In case someone else needs it and doesn't do the modelling and fine tuning for a print this small. If this is useful to you drop a comment. That would be cool. :) Print,…

Order a print of this model

Printables

43mm Clip Doorstop

I had been meaning to make something like this for a while and then Taekyeom Lee posted this and pushed me over the edge. https://www.instagram.com/reel/CZp54BjpP_Y/?utm_source=ig_web_copy_link It aint fancy, but it gets the job done.…

Order a print of this model

Printables

Simple 3D Printable Doorstop

This minimalist doorstop is designed to fit under most standard doors and hold them in place. It features a wedge-shaped design for easy use and a stable hold on flat surfaces like wood, tile, or laminate. Note: This model does not…

Order a print of this model

Printables

Tesla cyberdoorstoper

Order a print of this model

Printables

Flip up locking doorstop

Just a remix that uses a M5x50mm bolt two M5 washers and a nut. Also a toe nub to flip it up. It locks in place by sliding down. This one uses VHB tape to stick to the door but I can make a screw on version. I will also put stick on…

Order a print of this model

Printables

DOORSTOP - DOOR WEDGE - DOOR STOPPER - (Tested)

Easy To Print Doorstop !!

Order a print of this model

Printables

Mr. Doorstop

A door stop that looks like a person being squished. Category: Household

Order a print of this model

Printables

Encased Spring Doorstop / Door Catch

The enclosure prints in place with build plate-only supports . I tested it with 0.2mm layers. Works in PLA and TPU for AMS (68D TPU). 0.2mm layer height Build plate-only Supports (tree) Check the bridge direction parameter so the…

Order a print of this model

Printables

Doorstop

A strong and stylish 3D-printed doorstop, available in two versions: one with a single color and one with a multicolor ring. Comes with optional stick-on grips underneath for extra stability. Ideal for home, office, or classroom use.

Order a print of this model

Printables

Doorstop FJ Dynamics

Doorstop of FJ Dynamics for scanner

Order a print of this model

Printables

Just a basic doorstop

just a very basic doorstop

Order a print of this model

Printables

Compliant doorstop with soft TPU bumper

Tired of crawling on the floor to jam a wedge under a door—only to have it shoot out when someone bumps it? This print uses a built‑in compliant (spring) mechanism that traps the door between two pads at floor level. Just set it near the…

Order a print of this model

Printables

doorstop

Versatile wedge designed to hold a door, support an object, or stabilize anything that needs to be kept steady. Simple, effective, and practical for everyday use.

Order a print of this model

Printables

Doorstopper

Order a print of this model

Printables

Simple Doorstop

The Doorstop is a Simple Design with lots of Square Holes to make it Filament Light but still Structurally Sound.

Order a print of this model

Printables

simple doorstop

A simple 3d printable doorstop

Order a print of this model

Printables

CAT ACCESS DOORSTOP

this takes the place of the striker plate. it is based on a 30" wide door if it dosent fit then heat slightly and bend. this will stop and hold door open 4 inches. if you need to close it all the way just push on it to pass the stopper.…

Order a print of this model

Printables

Doorstop simular to Ikea PATRULL

A doorstop I modeled similar to an Ikea PATRULL.

Order a print of this model

Printables

Doorstop

Model Size: 60mm x 15mm x 70mm This 3D-printed doorstop is a simple yet highly practical tool designed to keep your door securely in place. Whether you want to prevent a door from slamming shut due to drafts, keep it open for better…