1 / 4
STOP !T doorstop — image 1
1 / 4

STOP !T doorstop

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€2.24 – €2.73 net (excluding VAT)

For file: nologo_stop_it_doorstop_mk3s_0.4n_0.15mm_PLA_MK4IS_1h34m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.48 excluding VAT (range midpoint).

Weight reported by the author
51 g
Print time reported by the author
1.53 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A slightly different, not floor contact based door stop

Rating
0 / 5
Likes
10
Downloads
21
Makes
1
Views
334
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

STOP !T is a very simple and plain doorstop for doors with an automatic door closer. It actually uses the automatic door closer to keep the door open without scratching the floor, entangling with the carper, accidentially getting kicked away… Just open the door, slide it in the automatic door closers slot and softly release the door. It will rest against stop!T and remain open… When unused just place it on top of the automatic door opener, so it is always at hand when needed. Used mine for years now and would not want to miss it!

 

Design

It is really just a plain and simple slab that widens a bit towards the middle to provide a good grip. Nothing more, nothing less. 

 

Construction

All rounded corners are clipped to 35° in order to avoid any supports and the rest is just a plain… I already mentioned that ;)

In case your automatic door closers gap has slightly different dimension you can easily and quickly scale the width and length of the part directly in you slicer, no CAD required.

 

Files

 

nologo_stop_it_doorstop.stp

  • STEP file of the part

nologo_stop_it_doorstop.stl

  • STL file of the part

nologo_stop_it_doorstop_mk3s.3mf

  • Settings for printing in PLA with the MK3S+

nologo_stop_it_doorstop_mk4.3mf

  • Settings for printing in PLA with the MK4 Input Shaping Alpha

nologo_stop_it_doorstop_mk3s_0.15mm_PLA_MK3S_3h7m.gcode

  • Ready to print GCODE file for printing in PLA on a MK3

nologo_stop_it_doorstop_mk3s_0.4n_0.15mm_PLA_MK4IS_1h34m.gcode

  • Ready to print GCODE file for printing in PLA on a MK4

 

Slicing, Printing

It prints completely with standard settings, really nothing special, 2 perimeters, 4 bottom / 5 top layers, 15% infill, laying flat on one side, no brim. The only thing you might want to change, if you are slicing yourself and had to rotate the part to fit on your print bed, is the infill orientation so the bottom and top layer are running along/parallel the long side of the part (already done in the provided GCODE and 3MF files).

 

Assembly

Sorry, but there is actually not much to assemble.

 

Happy printing & KEEP THE DOOR OPEN!

Tags