STOP !T doorstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,24 € – 2,73 € netto (bez VAT)
Dla pliku: nologo_stop_it_doorstop_mk3s_0.4n_0.15mm_PLA_MK4IS_1h34m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,48 € netto (środek widełek).
- Masa podana przez autora
- 51 g
- Czas druku podany przez autora
- 1,53 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A slightly different, not floor contact based door stop
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v3.0
STOP !T is a very simple and plain doorstop for doors with an automatic door closer. It actually uses the automatic door closer to keep the door open without scratching the floor, entangling with the carper, accidentially getting kicked away… Just open the door, slide it in the automatic door closers slot and softly release the door. It will rest against stop!T and remain open… When unused just place it on top of the automatic door opener, so it is always at hand when needed. Used mine for years now and would not want to miss it!
Design
It is really just a plain and simple slab that widens a bit towards the middle to provide a good grip. Nothing more, nothing less.
Construction
All rounded corners are clipped to 35° in order to avoid any supports and the rest is just a plain… I already mentioned that ;)
In case your automatic door closers gap has slightly different dimension you can easily and quickly scale the width and length of the part directly in you slicer, no CAD required.
Files
nologo_stop_it_doorstop.stp
- STEP file of the part
nologo_stop_it_doorstop.stl
- STL file of the part
nologo_stop_it_doorstop_mk3s.3mf
- Settings for printing in PLA with the MK3S+
nologo_stop_it_doorstop_mk4.3mf
- Settings for printing in PLA with the MK4 Input Shaping Alpha
nologo_stop_it_doorstop_mk3s_0.15mm_PLA_MK3S_3h7m.gcode
- Ready to print GCODE file for printing in PLA on a MK3
nologo_stop_it_doorstop_mk3s_0.4n_0.15mm_PLA_MK4IS_1h34m.gcode
- Ready to print GCODE file for printing in PLA on a MK4
Slicing, Printing
It prints completely with standard settings, really nothing special, 2 perimeters, 4 bottom / 5 top layers, 15% infill, laying flat on one side, no brim. The only thing you might want to change, if you are slicing yourself and had to rotate the part to fit on your print bed, is the infill orientation so the bottom and top layer are running along/parallel the long side of the part (already done in the provided GCODE and 3MF files).
Assembly
Sorry, but there is actually not much to assemble.
Happy printing & KEEP THE DOOR OPEN!