Doorstop Multimaterial | Door Stopper Multi-Material | Rubberized Door Stop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A doorstop for multi-material printing!
- Rating
- 4.933 / 5
- Likes
- 2,049
- Downloads
- 7,358
- Makes
- 84
- Views
- 38,703
- Reviews
- 75
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple doorstop for multi-material printing!
Intended to print the contact surfaces from flexible filament, of course this is not a must ;)
As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly interlocked to increase the contact surface and counteract shear forces.
I made the doorstop primarily for my doors at home, which have quite a large gap. That's why the doorstop is 6 mm thick at the front and 33 mm at the back. Of course, you can scale down the model for your application.
Please leave a like if you enjoy my design. Feel free to check out my other designs too! If you want to support me, please check out the designs in my Printables Store: Click here! |
