Doorstop Multimaterial | Door Stopper Multi-Material | Rubberized Door Stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A doorstop for multi-material printing!
- Ocena
- 4,933 / 5
- Polubienia
- 2049
- Pobrania
- 7358
- Wydruki
- 84
- Wyświetlenia
- 38 703
- Oceny
- 75
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple doorstop for multi-material printing!
Intended to print the contact surfaces from flexible filament, of course this is not a must ;)
As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly interlocked to increase the contact surface and counteract shear forces.
I made the doorstop primarily for my doors at home, which have quite a large gap. That's why the doorstop is 6 mm thick at the front and 33 mm at the back. Of course, you can scale down the model for your application.
Please leave a like if you enjoy my design. Feel free to check out my other designs too! If you want to support me, please check out the designs in my Printables Store: Click here! |
