Liczymy pasujące modele…
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Bristle deflector for Ryobi Cordless Debris Floor Sweeper 18V ONE+ (R18SW3)
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Masterful Dungeons Stone Floors are designed as part of a fully modular dungeon system built for tabletop RPGs like D&D and other TTRPGs. These floor tiles are double sided , with each half connecting to each other with a allowing full…
Masterful Dungeons Floor Traps are designed as part of the Masterful Dungeons modular dungeon system. These tiles introduce interactive and hidden hazards into dungeon layouts while remaining fully compatible with the double-sided tile…
Flooring Spacer for Installation of Laminate/Vinyl/Wood. For 1/4” & 1/2” Gap. Designed to stay in place
Masterful Dungeons Stone Floors are designed as part of a fully modular dungeon system built for tabletop RPGs like D&D and other TTRPGs. These floor tiles are double sided , with each half connecting to each other with a allowing full…
These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…
These are the brackets that are needed if you want to add the false floor in the cargo area/trunk of the Chevy Bolt LT. I found this model online but I can't find where I found it again to link to. I did not create this model. I remember…
A simple floor sweeper (Swiffer) with TPU attachment wipes. Can be used with whatever fits like dryer sheets or old rags. There is a small (140x125mm) and wide (180x125mm) version. This file uses the pole attachment parts from the Dryer…
Did you always want your own LIGHT-DUTY FLOOR SWITCH, as seen in the excellent TELEPORTATION GAME series? Well, this isn't quite it. Super quick model - it's all butt joints intended to be glued together with an adhesive of your choice.…
Floor holder for screwing to a solid surface, with 6mm through hole. Printed in NYLON
ADDED: Martial Artist, KF1 logo, and KF2 logo. These are 35x35mm icons ready to go on a keychain. I recommend a color change at layer height 3.2mm for maximum effect. I do not own the rights to KillingFloor2 or any symbolism therein.
These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…
These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…
Broke my drain Designed new one to replace
Commercially available magnetic sweepers are usually 600mm / 2ft wide and too bulky for my small home workshop. My solution was to design a smaller version (which ended up being approx 235mm wide) that can get into smaller areas and be…
Added support to the Dryer Sheet Swiffer that was created by Julius 3E8 to be used with a standard broomstick handle. Only changed the mount for the sweeper pole. For all other parts see the original model used.
Source files for a simple floor sweeper (Swiffer) with TPU attachment wipes. Can be used with whatever fits like dryer sheets or old rags. There is a small (140x125mm) and wide (180x125mm) version. See the public file for more information.
Summary Fully printed hinge – just slide a short piece of 1.75 mm filament through the holes to pin the two halves. Printing I would recommend 0.2 mm layer hight. For color change swap filament on preset layers.
My dad has a couple of floor magnets and over the years the wheels broke. He had made some out of wood, but once I got a printer, I modeled up some replacement wheels. here is a video of the finished parts: I printed with 3 walls, but you…
Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: 3DJake TPU A95 Category: Office
We got one of the budget floor vacuum robots (Laresar Clean Evol 3s). It works pretty well so far but is just short enough to get stuck under the couch. I looked for something like this but most were for the roomba’s. The front bumper…
wedges to force vinyl flooring into position against a wall
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x100mm in size You may print at higher layer heights below the Base Thickness of 0.24mm The Max allowed Thickness is 2.24mm and the Actual…
Desktop display raiser / stand to elevate the monitors and create more space on desk. I had few hardwood planks left after flooring, so decided to use it as monitor raiser. Shelf height is 115mm, but can be adjusted by scaling legs in…
The oak floor registers we purchased had one major flaw - the pin that held the cover against the base was very fragile and broke off leaving the cover loose and the floor register wide open. I searched high and low for a replacement and…
This brackets are replacement parts for your BMW (G20/G21/..) All-Weather Floor Mat and are used to hold the metal inserts around the BMW logo in place. I lost mine during a car wash and this part can't be ordered. I could have only…
Made of PLA, and designed with interior holes to fill with aquarium sand or other material to give weight and consistency to the support. It's important to scale and adjust the skateboard to your needs. There are many models and sizes.
If you want to use an automatic floor register, follow these instructions: Find 3D-Printed RC cars here.
English: I created coasters or protectors for table legs or furniture feet in general. Used here on a pinball machine. The new project will be on my YT channel soon: https://www.youtube.com/@VolkerVolkach I printed it with TPU from…
Floor trim corners and ends Koncovky pro podlahové lišty SLK50 z Brena
we can all agree, for many of us right now… it's hot as Balls.. and well, my balls are hot. WFH or just in for a gaming session, with your 5090 pumping out the heat of a 1000's suns. I needed something to keep the crown jewels from…
A funny floor sign to use at school home or work. best printed at any level at or above 10% infill. Have fun :)
This extension foot is designed for the Ultimulti legs for Coreboxx , allowing it to be mounted securely to the floor at a 40° angle . It provides additional stability and flexibility for installations where the Ultimulti needs to be…
Build your own tabletop terrain environment with ease - from Fantasy DnD, Sci-Fi Wargame or Gritty Trench Crusade terrain , using our unique, 3D printable STL tileable floors, walls, arches and much more. No magnets required No glue…
The screw holes are both countersunk and counterbore to ensure the heads don't penetrate and scratch the floor. I also made small click in covers to cover the screw holes to ensure they don't scratch the floor and to keep dust and dirt…
Extra anchors for versafit gapless rubber home gym flooring tiles from force usa.
This floor-mounted door stop is designed to be durable, quiet, and effective at protecting doors and walls. The base is printed in PETG, providing rigidity, strength, and good resistance to impact and humidity. The impact head is printed…
Masterful Dungeons Stone Floors are designed as part of a fully modular dungeon system built for tabletop RPGs like D&D and other TTRPGs. These floor tiles are double sided , with each half connecting to each other with a allowing full…
Masterful Dungeons Floor Traps are designed as part of the Masterful Dungeons modular dungeon system. These tiles introduce interactive and hidden hazards into dungeon layouts while remaining fully compatible with the double-sided tile…
A lampshade for a floor standing lamp. 9.04 inches tall, 9.82 inches wide across corners, 3 1/2 inch diameter base with 1.5 inch through hole. Example shown printed with beige PETG using fuzzy skin texture inside and out added with slicer…
This is a 3D-printable replacement for the two large chassis plugs (floor pan bungs) found underneath the Peugeot 205 (one on the driver’s side, one on the passenger’s side). The original rubber parts often degrade over time, fall off, or…
Print a base, which I had to position sideways to fit a P1S. Then choose a grill design—more options are on the way. This isn’t as sturdy as a metal grill, so I suggest placing it in a spot at home where no one will step on it, but where…
Print with the bottom side facing upward. Infill should not exceed 15% so the side walls remain flexible; otherwise, they may crack during part insertion. Printed in PC.
This floor lamp shade has a bottom diameter of 75mm and is 80mm tall. The bottom hole is 41mm in diameter. 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01
This is an alternative to the trigger guard and floorplate for Boyds AT-One type stocks. It is designed to fit an AT-One Steven 300. It is intended to replace the 93E MKII. Installation is very simple; you will only need three screws in…
Bierbank Bodenschoner Damit der Boden nicht verkratzt wird. Kann mit einem Kabelbinder nochmal fixiert werden. (Sollte aber auch so halten) TPU Infill 30% Auf die Orientierung achten Mit Support gedruckt (Manuell) Beer Tables/Benches…
Made these spacers to finish a flooring job. Tired of the wood shims moving around!!! 1/8"- 3/16"- 1/4"- 5/16"- 7/16" sizes
Just a very simple floor mop, all you need to assemble is a M4 x 16 countersunk head screw
A unique 3D printable creation — this Detailed Dungeon Floor Round Base 25Mm, Cobblestone Pattern, For Miniature Figures Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Masterful Dungeons Stone Floors are designed as part of a fully modular dungeon system built for tabletop RPGs like D&D and other TTRPGs. These floor tiles are double sided , with each half connecting to each other with a allowing full…
A cover for the tips of your ski poles, so you can use it indoors, such as when you have a bad back and need temporary walking sticks. Can also be used as general protector for your ski pole tips or what they hit. It puts a 25mm rounded…
Material: TPU/TPE. Number of perimeters: 1-3 (for TPU A95) or 2-4 (for softer filaments). For optimal performance, for the "Side feet" model, use 1-2 perimeters up to 18 mm height and 3-6 perimeters above 18 mm. Top layers: at least 5 (1…
Description: This is a remix of user_483412304 's original model. It is a base shroud with a built-in switch box holder for the Govee Floor Lamp. I have resized the screw holes to 4.6mm to work with M3 self-tapping screws, and I added a…
This model utilizes the MMU floor mount designed by @MIRE ( Collection of mods for coreboxx premium) V2 is ready and I'm much happier with it. It raises the MMU 30mm over the V1 to give the out PTFE a better angle to the slot in the…
I got annoyed with my floor mats slipping around the vinyl liner on my 2022 F150. Ford suggests using W715120-SS3JA clips but they didn't secure well for me. I designed a threaded oversized clip so that they lock in place securely. The…
Here is a collection of Forest Floor bases for your RPG minis. There is a base pack where you get the following sizes: 100mm 80mm 60mm 50mm 40mm 32mm 25mm There are also individual files for each size. I hope you enjoy them and find them…
Contains 2 different floor extension: 15mm outside 12mm inside CNC + TPU Rubber gasket 10mm outside 7mm inside CNC + TPU Rubber gasket Features countersunk screws so they wont get destroyed when bottom out.
A small funnel to make filling the clean water tank easier and less messy
TPU floor protection for the (very cheap) party table and bench for indoor use. It prevents the ground from getting damaged. You need Model 1 and 2 twice per bench or table. They clip on and stay on but can get removed if you like to use…
Pitch 3.85mm Minor dia 19.3Major 22.4mm Angle 4° It also has a 4mm hole for a flat head screw
Masterful Dungeons Marble Floors are designed as part of the Masterful Dungeons modular dungeon system. These tiles provide a clean, high-end floor style , suited for locations such as mansions, temples, and other refined interior…
Masterful Dungeons Fine Wooden Floors are designed as part of the Masterful Dungeons modular dungeon system. These tiles represent refined wooden interiors , suitable for locations such as mansions, guild halls, and upper-class living…
Floorball Stick Wall Mount with Customizable Nameplate A practical and stylish wall or cabinet mount for two floorball sticks. This design features a clever hidden-screw system – the mounting screws are covered by a customizable…
Two brackets, intended to support 1x4 and 1x6 boards between floor beams exposed in a basement. For my purposes, they were used to hang an AC Infinity carbon filter above my 3D printers.
Thank you to Nys1 over at Thingiverse for the original files. I have used the files, and done a lot of tweaking in the slicer for best printing. This has been tuned for the Core One L and Prusament PC-CF, but will probably work good with…
Saturday Night Fever - Tony Manero on the Floor - 1977 3D printable model.
A cute miniature stool with a seat shaped like a button. More models here → https://cults3d.com/ja/yuza/ichigodaifuku/3d-moderu This playful design turns a simple stool into a charming decorative piece. The button-shaped seat gives it a…
Parametric Cord Winder Hooks for Floor Lamp I got sick of looking at the pile of cord next to the floor lamp in my office, so I designed this simple print to organize it. I designed this to be in two pieces to avoid the need for any…
Holds a standard ~17mm x 7mm aluminum LED channel and its wiring. Base has a hole for a DC power jack and two half-circles to attach zip ties to. OpenSCAD file included in case anyone wants it :) DIFFERENCES FROM V1: Base walls are…
Made for concrete weight plates to stand on in a row but should work with bumper plates. The plates pictured are from Stix and Stone at Ø17.5" and the stand internal width is 3".
🛠 Revamp Your Chairs with the Perfect Fit! 🛠 Say goodbye to scratched floors and noisy chairs with the Universal Chair Leg Cap ! This 3D printable model lets you create your own replacement caps, designed specifically for saloon chairs,…
Print in TPU for the rubber feel. Change infill and wall layers depending on required softness or stiffness. Concept is not printed yet. Support might not be needed, depending on print pattern. 2mm width of each web. I have to test print…
Utilize this versatile spacer to effortlessly establish the perfect spacing between a wall and the first row of planks. Ingeniously crafted, this tool is designed to offer 4 distinct gap sizes, enabling precise and varied spacing options…
Replaces the simple metal plate of the original magazine and makes it easier to pull the magazine out of the magazine pouch... and looks better too. On the top something fur the punisher fans out there.. don't play too serious ;-) Created…
The lock/clip in the floor to hold the floor mat in place on the Honda CRV easily breaks loose from the mat. This is a bit of a kludge but holds the mat where it should be. Printing Requires supports Use PETG or better filament
This is a clip for attaching a floor panel for the kitchen cabinet. The lower part is usually located on the panel.
Two options: Floorplate: make it in copper/alum 3mm sheet Drill holes: make it in plastic and screw to the box, and use it as a template for drilling
New Rubber Lip for Your Philips Vacuum Cleaner Floor Nozzle Are you dealing with a worn-out rubber lip on your vacuum cleaner's floor nozzle? No worries, I've got the solution for you! After the rubber lip on my floor nozzle broke, I…
Fits chair legs with dimension 17mm (0,66'' or 21/32'') at the bottom and 18mm (0,7'' or 23/32'') at 20mm (0,79 or 13/16'') height from the floor. The fit is snugg and discret since it easily blends to the chair design. As always with TPU…
The models were made in the Fusion 360 program. Support must be enabled when preparing files for printing. Frame assembly : Print with supports. 0.20 layer height, 15% infill, and 2 walls. Frame cover: Print flat with supports. 0.20 layer…
The cutouts can be filled with lead or steel shot, or plaster, etc. to give the base some extra weight. I used lead pellets and filled the remaining space with black tinted epoxy.
An improved V2 version has been released! I created this base to hold a standard ~17mm x 7mm aluminum LED channel and its wiring. Included in the base is a hole for a female DC power adapter and two half-circles to attach zip ties to. I…
I made these attachments for my Shark Vertex Pro but should fit any vacuum with a 34mm attachment wand. I printed with PLA and it's held up pretty well. I printed them vertically, the bottom facing down and with supports.
This is a lampshade for “Philips Hue Gradient Signe Floor Lamp”. The lampshade is made out of 6 segments so it is printable on e.g. Prusa MK4. Slicing: 0.6mm nozzle, (printing time with 0.4mm nozzle is considerable longer on a Prusa MK4).…
Story Our sauna floor drain got clogged when bark and other debris from the firewood made their way in. This gave us the idea for an additional filter that prevents larger debris from entering the sewer. Hopefully, this will be helpful to…
![[V2] Floor Lamp For Aluminum LED Channels](https://media.printables.com/media/prints/1f296278-a688-4740-a5a8-dbe9c7c4e515/images/12788475_34d79edc-7eea-4458-85ec-1d03632439e3_117fac82-2a9e-4b6c-9033-e147f38be736/aquamarine.png)
![[V1] Floor Lamp For Aluminum LED Channels](https://media.printables.com/media/prints/982922/images/7492938_fe38be34-568e-4445-9f6f-b4963b68c1ce_23cbf00a-3554-4b46-a87d-cf1a5e4bbc7c/large_display_img_0519.png)
