1 / 9
Chair Feet in many Diameters and Angles - Floor Protection - Rev. C — zdjęcie 1
1 / 9

Chair Feet in many Diameters and Angles - Floor Protection - Rev. C

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple design to spread the weight of chairs with metal-pipe legs more evenly. All diameters 16-32mm and 60º-90º.

Ocena
5 / 5
Polubienia
53
Pobrania
364
Wydruki
5
Wyświetlenia
1662
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I designed these feet to protect a wooden floor from the metal-pipe legs of a couple of chairs. With the exact angle of the legs, the base of the feet is flat on the floor, reducing the risk of damaging the floor.

Update 2025-08-06: This is revision C of the chair feet. I added all angles from 60º to 90º and diameters from 16mm to 32mm. Have a look at the ZIP files in the “Other Files” section for complete sets.

Where are All the Files?

The file section contains only a small selection (showcase) of all 480 model files. Checkout the ZIP files in the “Other Files” section for packages with all angles for each diameter, in 1º steps from 30º-90º.

How to Print the Floor Protectors

In the file section, you will find PrusaSlicer example projects. Use these as a good base for your settings, or check the table below:

Nozzle Size:0.4mm, 0.6mm or 0.8mm
Layer Height:0.2mm recommended
Filament Materials:ASA, PETG, TPA (100% infill!)
Perimeters:Three perimeters
Prusa Slicer Profile:“0.2mm Quality”

Dimensions

Look into the catalogue PDF for all dimensions shown in this drawing.

The part number and file name have the following format:

LR2250C-D<leg diameter>-A<angle>.3mf

Angle (A)

This is the angle of the leg in degrees. The angle of 90º means a completely straight leg.

Leg Diameter (D)

The nominal diameter of the chair leg. There is no tolerance, so the four fins clamp slightly to the pipe of the leg. 

Total Height (H) and Foot Diameter (FD)

  • The total height is leg diameter * 1.875, rounded.
  • The foot diameter is leg diameter + 16mm.

This and That

About the Right Filaments

This is no PLA print. It works well with PETG, but try a print with ASA if you have it. TPA is also a good material, but difficult to print in that shape.

The Print in the Photo

The print in the photo is model LR2250B-73-D16, printed on an Original Prusa i3 MK3S+ with Prusament PETG Jet Black.

Explore More from Meti·kumi

Interested in my designs? Browse through my collection of 3D models:

👉 https://metikumi.com/3d-models/

Stay connected on social media for the latest updates and work-in-progress insights:

👉 https://metikumi.com

Conclusion

I hope this foot protects your floor or gives your chair a nicer look. Whatever it is, if you like this print, please rate it and add photos of them.

Happy Printing!

Tagi