Floor (or wall) mirror for dollhouse (scale 1:12)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's like the real thing only smaller (in scale 1:12) to fit inside the dollhouse
- Ocena
- 0 / 5
- Polubienia
- 154
- Pobrania
- 311
- Wydruki
- 0
- Wyświetlenia
- 890
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
For assembling the mirror use small pieces of filament on each side of the mirror. You can insert it and use it like that or you can glue it/burn it with a lighter and press against the frame. But in that case make sure you do that only on one side of filament piece (otherwise it won't be able to rotate).
To make it look more like a real mirror you need a reflective surface in the middle. I used a small piece of aluminium foil. Put a piece of scotch tape on one side of aluminium foil (to prevent it from creasing/tearing). Cut to size: cca. 34 x 116 mm and glue to the frame. If you have some shiny packaging (parfume box or something similar), you can use that as well. It might work even better than my solution.
If you don't want the mirror to stand on the floor, print the "wall" version (it has no holes on the frame) and will look nice mounted on the wall of your dollhouse.
I printed mine with standard settings in Cura.