Liczymy pasujące modele…
A miniature Nintendo Switch for your dollhouse, figurines or just for fun. Prints well with PLA at 0.1 layer height. For a nice finish iron the top layers. It works very well on the middle part, with the controllers it can smear a bit…
gabby dollhouse cake topper with the possibility of changing the name and number.
All my models are free. Due to banking restrictions in my country, I’m unable to sell models directly. If you’d like to support my work, you can do so on Patreon. https://www.patreon.com/15369015/join
I was working on a personal project for a family member and needed to split the models into separate files. I gave them descriptive names, but I did not change anything else about the files. For all printing instructions, you can find the…
Hello, Ive been 3D printing since 2020, and finally am uploading stuffs. Feel free to print or remix this as you see fit. I am printing this in silk PLA, with the flat face down and 4 walls, as the legs are 5mm on a 0.4 nozzle and 0.2mm…
I separated the spigot and the sink due to difficulties printing. Original instructions for build can be found here . I printed with tree supports, post 2mm, base diameter 3mm, base height 3mm, with a 40 degree overhang.
Hello, Sharing the model of miniature house / dollhouse I made for my wife. There are 2 versions: -one that fits on BambuLab P1P/P1S/X1C/A1 - 250mm wide, 193mm deep and 177mm high -one for BambuLab A1mini - 170mm wide, 133mm deep and…
Hello, Sharing my project of fireplace for dollhouse / miniature house in scale 1:18. Feel free to rescale if needed :) Dimensions: 70 x 30 x 60mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the…
Print-in-Place Miniature Table (1:12 Dollhouse) A 1:12 scale dollhouse table that prints fully assembled. This model is print-in-place , meaning the legs and tabletop are printed together as a single piece—no assembly required. Features…
Small model of a stove/oven/range, REMIXED for one-step printing
Print the part with 0.4 nozzle, 0.2 mm layer, pla of other material. Assemble by placing a piece of copper wire or a piece of filament in the hinge. The window can be fitted with glass by placing a cut-out piece of mica or plexiglass in…
Barbie-like dollhouse furniture: All printed with 0.4 mm nozzle: Wardrobe - fully printable without support. Use 1.75 mm filament as a connector for doors. Table - I suggest to print “loose” version to put legs into countertop easier.…
This is a dollhouse lamp that you can fully adjust to your needs! The lamp is comprised of multiple parts that can be separately printed. The lamp post is hollow and the base has a conduit to run a wire through, so you can add a LED to…
A simple country-style table for a doll's house or other dioramas and miniatures. The table can be printed completely without support. On my profile there is also a matching bench. Maybe I will also make a chair when I have the time.
A simple country-style bench for a doll's house or other dioramas and miniatures. The bench can be printed completely without support. There is a matching table on my profile. Maybe I will also make a chair when I have the time.
Kleiderschrank für Puppenhaus / wardrobe for dollhouse
A simple cookie cutter of Pandy out of Gabby's Dollhouse. Should be easy to print eith a 0,4mm nozzle
THIS IS THE OLD VERSION! Check out the improved version here: https://www.printables.com/model/584327-dollhouse-bathroom-set-v2 (Better 3D model integrity, visual improvements) -------- Scale is 1:12, you can scale up or down in you…
Remix to make it sturdier. You can print all the pieces or you can just use some marker on the tiara.
My daughter wanted to have a table and some chairs for her dollhouse. However, most table models I was able to find either didn't print well or had issues with the table legs being too thin. So I decided to print my own and let them being…
i make sprinkles from support material to avoid waste here's the molds and files I use for commonly sprinkled foods (hagelslag, fairy bread, donuts, etc) TIPS: - put any type of oil in the mold b4 putting clay in the mold or else you cant…
Print the chair and the legs. Then all you need to do is push the legs in to the base. Glue is not required.
This is a multipart baked goods case suitable for dollhouse cafes and similar. Intended to be printed in multiple pieces to simplify both printing and painting. You will need thin, clear plastic for the back doors and the case glass in…
A miniature Nintendo Switch for your dollhouse, figurines or just for fun. Prints well with PLA at 0.1 layer height. For a nice finish iron the top layers. It works very well on the middle part, with the controllers it can smear a bit…
Printed the original model at 50% scale for my daughter's Christmas gnome and quickly realized that there's something wrong with the Malm body model, some drawers wouldn't move at all, get stuck and also they weren't aligned at the same…
Gabby Girls Dollhouse Lamp by Nforce3D EN - Thank you for liking my model. I just ask that you follow me, nothing more, thank you and I will do the same. PT - Obrigada pelo o like no meu modelo Eu só peço para me seguirem nada mais…
This nice Lidl Playtive Dollhouse XXL comes with front door only. So I have created widows and balcony door which fits perfectly to prepared holes. Hinges are created using small piece of raw 1,75 mm filament. In my case the hinges works…
Check out my other files for more dollhouse furniture. No supports needed, no ams needed.
You can print sashes that provide 1 over 1 or 4 over 1 dollhouse windows. The flat springs on the sides of the sashes keep them in place after movement. I successfully printed everything without support. Install each sash by placing one…
A very simple set of stairs that can be printed for a dollhouse. Print with 0.4 or 0.6mm head 0.2-0.25mm layer on 0.4mm head. No support needed. Use a “fuzzy skin” modifier to add a carpet texture on the stairs. This will print on a 10…
Large Easy Comfortable Banana Chair in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12). Reduced print speed to 80% of Max. Printed in yellow PETG. I used tree supports on build plate only with no brim.
Upright Safe for 1:24 Playmobil Diorama scale or 1:12 Dollhouse scale. Reduced print speed to 80% of max. Printed in Creality gray PLA with no brim. The infill did not print for me, so I had to add standard supports for the interior.
Blacksmith Anvil in 1:24 Playmobil Diorama Compatible scale & 1:12 Dollhouse scale. Printed in creality gray PLA. The 1:24 Playmobil Compatible scale anvil printed okay with no supports, but the larger 1:12 Dollhouse scale needed…
Mushroom Table in 1:24 Playmobil Diorama scale and 1:12 Dollhouse scale. Reduced print speed to 80% of max. Printed in MIKA3D black/red silk pla with slim tree supports on the build-plate only, no brim.
Louis XV Armoire in 1:12 Dollhouse Scale & 1:24 Playmobil Diorama Compatible Scale I laid it on it's back and used default tree supports on build plate only to avoid additional support cleanup and to avoid accidentally breaking off one of…
Large Antique Curved Top Steamer Trunk in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12). Reduced print speed to 80% of max. Printed in gray PLA using standard tree support on build plate only (for the latch on the…
Vintage Ethan Allen Nightstand by Baumritter Colonial in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I laid it on it's back and used standard tree supports on build plate only to avoid additional support cleanup and…
Antique Mobile Kitchen Island with Enamel Top in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I laid it on it's back and used organic tree supports on build plate only to avoid additional support cleanup and to avoid…
Light Wood Side Table in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I printed it upside down, so no supports would be needed, and with no brim. Printed in gray PLA.
Plate / Teller for Dollhouse / Puppenhaus // NEW now with normale plate not only soupplate / Jetz neu auch mit normalen Teller (3mm hoch) nicht nur Suppenteller
Lexington Bob Timberlake Cherry Entertainment Center in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12). Printed in gray PLA with hybrid tree support on build plate only, no brim.
Farmhouse Credenza in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) Printed in apple green PLA, when oriented on it's back, no supports are needed, and no brim.
Antique Quarter Sawn Oak Hall Tree in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I laid it on it's back and used organic tree supports on build plate only to avoid accidentally breaking off one of the legs or arms…
Antique Chifferobe Dresser in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) Printed in gray PLA with organic Tree support on build plate only, no brim. Be careful removing the supports, the legs are spindly and fragile.
Modern Pine Sock Dresser in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I laid it on it's back to avoid breaking the legs during supports cleanup and to avoid additional supports for the top rim. Printed in gray PLA…
Small Jack Russel Type yap-yap dog can be used stand-alone or with dollhouse scale (1:12). Printed in gray PLA with organic tree supports on build plate only and no brim.
Vintage Paneled Blanket Chest in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I laid it on it's back to avoid accidentally breaking the legs during supports cleanup and to avoid additional supports for the lid.…
Charming Dresser/Chest of Drawers in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) Printed in gray PLA with default/standard tree supports on build plate only.
A simple garden arbor for your scale model. Includes built-in supports so no need to turn them on. Print it in wood PLA for extra realism! Full-sized STEP files included so you can make them whatever scale you want.
Pleated Swivel Chair in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) Both chairs were printed at 80% speed with standard supports on the built plate only with no brim. The 1:24 scale chair was printed with Polymaker…
Fun Tortoise Head Ottoman in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) Printed at 80% speed with standard supports on the build plate only in Polymaker PolyTerra Matte PLA Filament Peanut.
Mersman Maple End Table in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I printed it upside down so no supports would be needed, and with no brim at 80% speed using Polymaker PolyTerra Matte PLA Filament Peanut.
Large concrete-style planter accented with ram's heads in Dollhouse Scale (1:12). Printed at 80% speed with slim tree supports and no brim in gray PLA.
Cherry Wood Side Table with Shelf, Books, & Decor in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I printed at 50% speed with organic tree supports on build plate only using MIKA3D black/red silk PLA.
Small Chest on Legs in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I printed it on it's back at 80% speed with standard tree supports on build plate only in elegoo beige petg.
Pair of Modern Wood Nightstands in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) Printed at 80% speed with default tree supports on build plate only in Polymaker PolyTerra Matte PLA Filament Peanut.
Ed Roos Forest Park Line Cedar Chest on Legs in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) Printed at 80% speed upside down for easier cleanup, but I still needed organic tree supports on build plate only for the…
gabby dollhouse cake topper with the possibility of changing the name and number.
Vintage Stacking Blueprint Drawers by Mayline in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) Printed at 80% speed with standard supports on build plate only in Polymaker PolyTerra Matte PLA Filament Peanut.
Designed for a 1/12 scale dollhouse with my niece. Print 1 couch and 5 feet which will press-fit in later. No support necessary Changing up the top surface pattern in your slicer can give the fabric a textured look. I also used gyroid…
Designed for a 1/12 scale dollhouse with my niece. Use a fine layer height (0.12mm) and support the bottom side of the bed for best results. Changing up the top surface pattern in your slicer can give the fabric a textured look. Other…
A dollhouse (1:12) sized tablet based cash register / point of sale credit card terminal. The table is based on an Ipad pro, but thickened 4x so as to not be too fragile. If you have a really well dialed in printer, the bottom may be able…
Vintage Clifton Style Native American Pottery in Dollhouse Scale (1:12) Printed at 80% of maximum speed with no supports using ELEGOO Rapid PETG Brown.
A smiling little girl sitting cross-legged cuddling her teddy bear in dollhouse scale (1:12) Printed at 80% speed with standard tree supports on build plate only in Polymaker Panchroma Matte PLA Filament, Matte Lotus Pink
I included a bar for the hinge but at original size you can also just use a bit of paperclip or a toothpick if it doesn't print well. Looks with PLA at 0.2mm.
This is a modular room that can be used for dollhouses, photography, miniature or small object displays or dioramas. It has a sliding mount system on the walls and ceiling so that objects can be attached and moved easily. I developed this…
Simple dollhouse or Squishmellow couch that measures 120mm long, 52mm deep, and 49.90mm tall. Fits two Squishmellows. I printed on Ender 3 Pro with Print Bed filament.
Little table for dollhouses. Printed on Elegoo Mars 4 Ultra with translucent green resin. Explore my other Printables: https://www.printables.com/de/@Tritschi
You will need to design and build your own foundation. The bricks on my foundation are made from hand cut cork. Check out my YouTube video:
This can be printed all at once and can be assembled without glue. To assemble, place the crossbars of the sideboard legs into the slots on the underside of the sideboard surfaces. Repeat for both sides. The miniature table is held…
Dollhouse scale 1:12 Bathroom storage cabinet inspired by Ikea. Print with tree supports and they are easy to remove. I used an awl (as shown in pic) to remove the small supports in between the small bars on the bottom shelf. Also…
cut the model at the roof line for access. i place a connector in the corner above the entrance. more of a “polly pocket” scale than a 1:12 scale, to fit on most printbeds
This is a set of some Kitchen bits for your, or someone else's Dollhouse.
Kitty fairy's tree from Gabby's dollhouse. It prints perfectly (no supports needed). printing in multicolor is recommended, but if your printer doesn't support multicolor, coloring is also an option.
This 3D model is inspired by MerCat’s Spa Science Bottle from Gabby’s Dollhouse! With its round shape, cute details, and signature crown top, it captures the fun and magical vibe of MerCat’s spa world. Great for fans of the show, this…
This 3D printable table is inspired by Cakey’s kitchen from Gabby’s Dollhouse and is perfect for fans who love adding their own creative touch. The model includes a round tabletop, cake decoration, and a plain base ready for you to…
NOTICE: THE PHOTO IN THE COVER IS NOT THE EXACT MODEL! IT IS A RECREATION OF HOW THE MODEL LOOKS. Baby Box – Gabby’s Dollhouse Mini Figure Bring a touch of joy to your dollhouse world with this 3D printable model of Baby Box from Gabby’s…
Restore your Rainbow High Dollhouse to its original charm with this replacement set of front columns and doors , modeled to be a near match of the original design. This STL includes both the left and right column and door pairs , designed…
Cute teapot for your dolls and dollhouses. Easy to print and ready to play.
Created in OnShape. My first piece of Dollhouse furniture. Please comment and like.
Created in OnShape. Dollhouse furniture - dresser. Please comment and like.
Simple sofa, no supports needed. Ideally add a cushion for added fun. I've attached one with a little black elastic so it can be oriented on the base for a sitting cushion or upright for a back cushion. Suits roughly 10cm action figures.…
This elegant miniature vanity table with a working drawer is the perfect addition to any dollhouse or diorama. Featuring curved legs, subtle edging, and a functional pull-out drawer, it brings a touch of classic style to your mini…
I made these models for my son's superhero dollhouse. Fits suitably with 10cm action figures. Looks good with an image glued inside to to be the TV picture.
This 3mf file has it printed on its side. Note if printing on side, you have to sink it into the printbed else the protruding “screws” will cause the model to float above supports. Since this is a zero contact support with PETG for…
STL files scale is 1:12, but it can be scaled to a bigger size. Printing hits: Any plastic can be used No supports needed Three colors needed If printing at original scale 1:12, then do not print water level (Tea Pot_filament.stl), just…
Catrat or Yogato from Gabby dorllhouse You are going to need a lot of supports
Pandy from Gabby dorllhouse You are going to need a lot of supports
DJ Capucha - DJ Catnip from gabby dollhouse You are going to need a lot of supports
A detailed 3D printable miniature nightstand with two drawers and a bedside lamp on top. Perfect for dollhouse interiors, dioramas, or tabletop setups. This small piece of furniture adds a cozy and realistic touch to miniature bedrooms or…
A small, detailed 3D printable chair designed for dollhouses or miniature dioramas. Features a simple backrest, sturdy legs, and a realistic design. Perfect for furnishing a tiny dining room, kitchen, or study in your dollhouse setup.
A miniature 3D printed round coffee table with a modern cross-leg base. Designed as dollhouse furniture or a stylish piece for miniature dioramas and decorative displays. Perfect to pair with a sofa or armchairs in your miniature living…
