Thermal Carafe Pitcher 1:12 Dollhouse Scale Accessory
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a thermal carafe for 1:12 dollhouse scale. This is not based on a particular design or model, it's pretty…
- Ocena
- 5 / 5
- Polubienia
- 185
- Pobrania
- 379
- Wydruki
- 2
- Wyświetlenia
- 1083
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a thermal carafe for 1:12 dollhouse scale. This is not based on a particular design or model, it's pretty generic.
While not intended to be functional, the lid screws on, the spout does have a hole that runs through, but the threads for the lid are not notched to actually pour if the lid is on. The threads are tight at this scale, so may need to be chased with a tap or die if you want to be able to take it on and off regularly.
The handle is separated to improve the chance of printing successfully. The body is indented where the handle should be glued on, so it should be fairly easy to get lined up correctly.
All three parts print in a stack to simplify printing. I used tree supports in Cura to be most successful.
Print Settings
Printer:
Prusa Mini+
Rafts:
Yes
Yes
Resolution:
.4mm nozzle, .07mm layer
grid
Filament: Hatchbox PLA Matte Black
Notes:
Sliced using tree supports in Cura
Category: Model Furniture