DOORSTOP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We needed some door stops around the lab at work, so I went about designing one.
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 778
- Wydruki
- 20
- Wyświetlenia
- 2012
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
We have several doors around the labs at work and we often need to prop them open. We had the opportunity to make some new ones, so I hopped on the computer, fired up Fusion360 and started designing. This doorstop prints well with a color change, however it is not necessary. I recommend printing with thicker walls for these, so my provided .gcodes have 5 perimeters and are printed at .3mm layer height. Not much to it, just slice however you see fit and hit print!
I typically design in imperial measurements. If a part comes in and it is too small, adjust the scale of that part to 2540% and it will be correct. Alternatively, in PrusaSlicer, you can right click the model and select “Convert From Imperial Units”.