1 / 7
Original Prusa Enclosure Folding Door
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Folding Door for the Original Prusa Enclosure
- Rating
- 4.941 / 5
- Likes
- 182
- Downloads
- 390
- Makes
- 19
- Views
- 3,203
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Features
- Easy to print and install
- Only 1 plate to print (5 small parts)
- Reuse the existing hardware (bolts and nuts)
- Folds completely to the side of the printer
- when used with the optional 270° Hinge for Original Prusa Enclosure
What you need
- Printed parts
- folding_door_hinge (2x)
- M3x6 bolts and nuts (8x)
- Reuse the existing hardware
- M3x6 bolts and nuts (8x)
- folding_door_hinge_center (1x)
- M3x12 bolts (4x)
- Reuse the existing hardware
- M3x12 bolts (4x)
- folding_door_magnet (2x)
- M3x6 bolts and nuts (4x)
- Reuse the existing hardware
- 10x3mm round magnets (2x) - Optional
- This door does not require magnets, but if you don't have magnets and want it to close more tightly, you can use this add-on
- M3x6 bolts and nuts (4x)
- folding_door_hinge (2x)
- Existing enclosure door hinges (2x)
- M3 washers (4x)
- Recommended
- M3 washers (4x)
Print Instruction
- Use the default Prusa Slicer 0.20 Quality Print Settings
- Nozzle Diameter : 0.40mm
- Filament : PETG or PLA
- Supports : Not required
- Brim : Not required
- folding_door_hinge(s)
- On build plate only (recommended)
- Infill : Gyroid 20~25%
- folding_door_magnet
- Infill : Gyroid 10~15%
Assembly
- Screw the folding_door_hinge (top and bottom) to the original door magnets
- Mind the correct orientation of the hinges
- Screw the folding_door_hinge_center to the original door handles
- Remove the enclosure hinges on one side
- Replace them by the folding_door_magnet
- Add washers (4x) where the panel is fixed to the enclosure hinges
- Recommended to reduce the stress on the panel
Change Log
- 2023-08-20 First release, added one plate to print them all ;-)
- 2023-08-20 Added a central hinge for more rigidity
- 2023-08-19 Early Release (beta)
You might also like my
- DryBox Spool Holder
- Remix of the 3030 RatRig Spool Holder for the Original Prusa Spool Holder
- BTT PI TFT43 DIP Touch Screen Raspberry Pi 4B Case for the Original Prusa Enclosure
- Adjustable Thermometer Bracket and Filament Guide for the Original Prusa Enclosure
- IPA Squeeze Bottle and Cotton Pad Holder for the Original Prusa Enclosure