1 / 7
Original Prusa Enclosure Folding Door
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Folding Door for the Original Prusa Enclosure
- Ocena
- 4,941 / 5
- Polubienia
- 182
- Pobrania
- 390
- Wydruki
- 19
- Wyświetlenia
- 3203
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 19) (Komentarze: 38)Remiksy (4)Kolekcje (322)Powiązane
Features
- Easy to print and install
- Only 1 plate to print (5 small parts)
- Reuse the existing hardware (bolts and nuts)
- Folds completely to the side of the printer
- when used with the optional 270° Hinge for Original Prusa Enclosure
What you need
- Printed parts
- folding_door_hinge (2x)
- M3x6 bolts and nuts (8x)
- Reuse the existing hardware
- M3x6 bolts and nuts (8x)
- folding_door_hinge_center (1x)
- M3x12 bolts (4x)
- Reuse the existing hardware
- M3x12 bolts (4x)
- folding_door_magnet (2x)
- M3x6 bolts and nuts (4x)
- Reuse the existing hardware
- 10x3mm round magnets (2x) - Optional
- This door does not require magnets, but if you don't have magnets and want it to close more tightly, you can use this add-on
- M3x6 bolts and nuts (4x)
- folding_door_hinge (2x)
- Existing enclosure door hinges (2x)
- M3 washers (4x)
- Recommended
- M3 washers (4x)
Print Instruction
- Use the default Prusa Slicer 0.20 Quality Print Settings
- Nozzle Diameter : 0.40mm
- Filament : PETG or PLA
- Supports : Not required
- Brim : Not required
- folding_door_hinge(s)
- On build plate only (recommended)
- Infill : Gyroid 20~25%
- folding_door_magnet
- Infill : Gyroid 10~15%
Assembly
- Screw the folding_door_hinge (top and bottom) to the original door magnets
- Mind the correct orientation of the hinges
- Screw the folding_door_hinge_center to the original door handles
- Remove the enclosure hinges on one side
- Replace them by the folding_door_magnet
- Add washers (4x) where the panel is fixed to the enclosure hinges
- Recommended to reduce the stress on the panel
Change Log
- 2023-08-20 First release, added one plate to print them all ;-)
- 2023-08-20 Added a central hinge for more rigidity
- 2023-08-19 Early Release (beta)
You might also like my
- DryBox Spool Holder
- Remix of the 3030 RatRig Spool Holder for the Original Prusa Spool Holder
- BTT PI TFT43 DIP Touch Screen Raspberry Pi 4B Case for the Original Prusa Enclosure
- Adjustable Thermometer Bracket and Filament Guide for the Original Prusa Enclosure
- IPA Squeeze Bottle and Cotton Pad Holder for the Original Prusa Enclosure