1 / 2
Spindle Rod Foot and Nut for Pet or Baby Gate — zdjęcie 1
1 / 2

Spindle Rod Foot and Nut for Pet or Baby Gate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Foot, nut, and wall mount for spindle rod of a dog/baby gate

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The intent was to be as close to original in the design.

The original threaded rod is M10x1.5, but I was unable to get a full-length threaded M10 bolt that long. My gate can fit either 3/8 a 7/16, with 7/16 being very snug.

Hardware Required:

  • 3/8 hex nut (Home Depot SKU ACD)

  • 3/8 x 3-1/2 hex bolt (Home Depot SKU AZB)

Files

  • wall_mount

    • Allows for double-sided tape or a countersunk screw

  • foot_covered

    • If printed in TPU or another flexible material, a bolt can be installed securely in the hex pocket

    • Fits a hex bolt head that is roughly 14mm (flat to flat) and ~6mm tall

  • foot_open

    • Allows for the bolt to sit inside the hex without being covered

    • Fits a hex bolt head that is roughly 14mm (flat to flat)

  • nut

    • Fits a hex nut that is ~14mm (flat to flat) and ~8mm tall.

Tagi