Liczymy pasujące modele…
Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…
This heavy duty gate latch is sure to be kick-proof from even the hardiest of Amazon drivers. That is why I made this. Amazon drivers kept kicking my fence gate even though there is a sign clearly directing them to go around to get to my…
For installing the remote bass knob from Rockford Fosgate (only tested for PLC-1) to your car with double sided tape (2cm) Print with (tree) supports as is. German: Zum Einbauen des Remote-Bassreglers von Rockford Fosgate im Auto mit…
i had the problem of dust collecting in the slot of the slider, so after some time i could not close it anymore. so i made another slider with the 50mm hole and i cut of the pins of the original slider. now instead of opening and closing…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains an optogate . These boxes fit the inlay of my Peli 1560 that I will share in the next days. For the hinges use M3x25 mm…
It can be printed in TPU PETG ASA an author impact-resistant material fits 20mm pole For different size holes, you may scale the model was designed with these gates in mind https://www.aliexpress.com/item/1005007766634281.html
Light up your space with a custom “Tori” Gate lightbox for your space Been in Japan and loved the vibe, wanted to come back, so I decided to print something to remind me of my goal! I used this USB-C Female PCB Click Here 5V Led Strip…
Stargate-Themed Lightbox Description: A unique Stargate-themed Lightbox. The Earth symbol is always visible, and when lit, the Stargate itself appears for a striking effect. Required Materials: LEDs available on AliExpress: Link to…
i printed mine with this dual color (gold/silver) PLA, i did not use supports but i think they could be useful if you use only touching buildplate to elevate quality. Enjoy
Model of non-rotating Stargate simplified for this scale and separated chevrons. Stargate - Diameter 203 mm It contains two parts which I recommend glue together with superglue. You can also use three dowels for better aligning (adjust…
This is a little dog that you can screw onto your toothpaste. When you squeeze the toothpaste he poops it out his butt. Print it on its side so the threaded portion stays round.
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
I lost the original screws for the case and didn't want to carry an exposed PCB, so I designed a 3D printable case. You do need to remove the plastic connector for it to fit (not pictured - removed & binned) (or you can modify the CAD…
This is a remix from @HandsOnKatie_827995 prints ( thanks ! ) Adapted for vertical corrugated sheet wall.
Home is many thing to many entities, but there is no place like it! In this series, I will share signs for many places called home. In this one, there is no place like the home of the Tau'ri! Two signs are included, one using the…
This is small model I came up with. It is a Stargate platform of HeruUr. It has no featurs and is a simple model so that even Heru has something, which is completely his :D No assembly video as this is rather simple model…
I have a Regalo baby gate and the lock mechanism snapped after a few months of use. I tried glueing it and that worked for about a month then it broke again so I decided to model the part in fusion 360 so it's a better fix.
A minimal stand to hold the Tuya Smart Life Zigbee Matter Hub Gateway in a vertical position on a desk or shelf. Hub measures 90mm x 20mm. Two versions, one with two screw holes 120mm apart. No supports needed. Print as pictured.
I modified this mount design so it can be attached to the rear door
Something to mount the Tuya Smart Life Zigbee Matter Hub Gateway to a wall. Mount keeps hub slightly away from wall for additional cooling. Hub measures 90mm x 20mm. Four mounting options to pick from: Matter Smart Hub Wall 40mm CS: Two…
I bought a baby/safety gate from a consignment sale for my basement stairwell and it didn't come with the mounting cups. Even if it did, I wouldn't have felt satisfied with a single screw mount to affix to a wall with an injection molded…
Convenient adapter for connecting corrugated conduit (iD 17mm, oD 21.5mm) with Haupa PG-16 cable gland. Printed without supports. You can use the zip ties to additionaly secure the conduit.
Gates Heavy Duty 20 tooth flanged pulley for 6mm belts Heavy Duty version of the common 20 tooth flanged pulley used on 3D printers. Model for printer and part recreations. Please leave a “Like” Thanks for downloading
The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…
designed these so i could quickly setup and take down pool noodle style gates for practice and they work great. for stacking gates, they are designed with time, cost and durability in mind i use 2' long 1/2" rebar and in the middle i take…
Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU Chamber. (No broken TV, when you demonstrate your airsoft…
I made this USB replacement for my 4 TB Seagate HDD. 2.5" portable drive.
A hook for a Retractable Stair Gates for Baby and Pets Child Safety Gate.
This version of the UXG-Lite mount is designed with mounting points that work with the IKEA SKÅDIS series of pegboards. NOTE: You will need to print additional parts. The model here holds the UXG-Lite itself, but does not include the…
Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…
I bought a baby/safety gate from a consignment sale for my basement stairwell and it didn't come with the mounting cups. Even if it did, I wouldn't have felt satisfied with a single screw mount to affix to a wall with an injection molded…
Crafted specifically for 3D printing, this is my fan-designed Stargate Dial Home Device (DHD) display model. It makes an impressive centerpiece for any display. Measuring 7.5(H) x8.5(W) x6.5(D) inches or 190(H) x 215(W) x 165(D) mm, this…
Clamp/wall mount designed for the amazing Stargate by @Gatebuilder https://www.printables.com/model/1333011-stargate-sg-1-kit 2 M3 x 16mm bolt by clamp (optional)
The “OpenHeat Gateway – Smart EMS Integration for Maker” allows you to connect and read data from your gas boiler via the EMS bus. It provides a simple way to integrate your heating system into a smart home environment (e.g. Home…
Simple indoor case with clip top for a PoE powered RAK WisMesh Ethernet Gateway. It's based on the RAK19007, RAK4631, RAK13800 and RAK19018 modules. I just used the integrated basic antennas and stuck them to the inner wall of the case –…
I made these mechanical logic gates in FreeCAD to teach computer science basics to a younger group of students. Printing recommendations: PETG (PLA springs wont last), no supports needed, AND gate pivot point will benefit from increase in…
Overview This is an improved version of Olympia's smoother parametric gateplates with a thread holder optimized for FDM. The original was meant for resin printing but I find that resin gates feel less pleasant than FDM, as the stick…
Modifizierter Halter für das Tado V3 Gateway zur Befestigung an IKEA Skadis. Einfach ohne Support druckbar, dank optimierter Skadis Befestigung. Modified Tado V3 holder for IKEA Skadis. Easy print without support cause of print optimated…
I was having issues with the standard encoder housing losing its tension over time, leading to false encoder readings. I thought back to when "springy" was released for the ercf and how much it helped with reliable tension and applied it…
Mini sized (Benchy-like) model of Japanese Mogami-class Frigate (30FFM). This is my first upload and the data may modified without notifications. I'm a paper model designer (if you are interested, check my X) and this model was designed…
Because our landlord had the back gate open outward, allowing it to open all the way, it's not very secure with the hinges on the outside I designed some security printing to make the back gate more secure Back Gate Security Ø 35 x 18 mm…
Beschreibung (Deutsch) Dieser vollautomatisierte 100mm Absperrschieber ist eine High-End-Lösung für Werkstatt-Absaugsysteme. Er kombiniert das bewährte Prinzip des Truncated Ball Valve mit einer stabilen Servo-Direktmontage und moderner…
Description: This model represents a low-poly stylized Lamassu (also known in Persian mythology as Gopat Shah ). It is a majestic protective deity, depicted as a hybrid creature with a human head (symbolizing intelligence), a massive…
This is a piece that attaches an indoor dog/cat gate to the wall
This model of the Golden Gate Bridge required assembly. To print this project, simply print the recommended print file. Gather all printed parts and some super glue. Assembly Steps: To assemble the bridge, place the base on a flat…
I didn't want to buy a whole bunch of PVC connectors from a home improvement store and I didn't want to 3D print connectors based on the OD of the PVC. These parts are remixed from the following model because the original model did not…
This can be printed as is. Place it sideways on the printer bed and enable normal supports.
After going through the surgery of opening my G5AR and attaching the tiny IPX connectors to provide external antenna access, I was a little worried about a mishap where an antenna cable got pulled with sufficient force to disconnect them…
The intent was to be as close to original in the design. The original threaded rod is M10x1.5, but I was unable to get a full-length threaded M10 bolt that long. My gate can fit either 3/8 a 7/16, with 7/16 being very snug. Hardware…
With this puzzle/balance game you can this gate. If you will use your imagination, it will look like Torii gate from Japan. In photos you can see the already built model and all pieces. This balance game can be used for some for example…
BabyDan Mygate F6 Multi-Gate / Playpen Wall Mount I managed to lose the original wall mount for the BabyDan Mygate F6 Multi-Gate. So I designed a wall mount that fits this model, and likely other similar versions as well. The post is 16.5…
This is a high-detail Tiefling bust designed for Dungeons & Dragons and other tabletop RPGs. The model is ideal for painters, collectors, and dungeon masters who want a unique fantasy character display piece. The sculpt features sharp…
I couldn't find this amp in Rockfords online cad files and I have one on hand so I modeled it using calipers and angle gauges to use in a 3d model to design an enclosure for it for off-road use. I made it in fusion so if you need it in an…
Rockford doesn't have this in their online cad so I modeled the one I have on hand using calipers and an angle gauge so it's accurate. I needed a model so that I could make a shroud for it for a mount. I made it in fusion so if you need…
This is a simple keycap with 'loose' tolerance to fit snuggly in any switch, without using too much force. I made it as a replacement for a board, where author used Kalih switches, which i swapped for Gateron Low profile switches. This…
A quick restrictor gate I cooked up for my Zippyy stick for Street Fighter V. It's a pretty quick print and mounts using the original screws and holes. Not the shortest throw, but to me it feels much better than the square gate it comes…
As requested by a colleague, I designed this electric gate unlocking key. Hope it could be useful for some of you.
This 3D printed tailgate support bracket is designed to hold the vehicle tailgate in a lowered and stable position when carrying slightly protruding loads . It helps distribute the load more evenly and reduces strain on the tailgate…
This is a direct-fit replacement tailgate latch hook for the Polaris Ranger (OEM Part 5459101 ). The model is designed to match the original geometry and installs with no modification required. It can be used on either the left or right…
Replacement liftgate hinge cover for Jeep Wrangler JK/JKU (2007–2018) . I made this because I didn’t want to spend $10 on a tiny OEM plastic piece, and I wanted something that looks as close to stock as I could get. This is the 5th…
Cerberus, the three-headed dog guarding the gates of hell
Connector to build gates from 20mm PVC tubes for racing with Tiny Whoop FPV drones.
A touch of Zen for your tank: this Japanese Torii Gate Aquarium Hide offers both tranquility and utility, making it the perfect feature piece for any aquascape or terrarium setup. Designed with shrimp, small fish, reptiles, amphibians and…
Replacement hinge for the babydan baby gate and others, made strong with the model designed to strengthen the shaft by running it down to the base of the model. Print in PTEG with 6 walls and 35% infil to remove any flex. Printing on a…
Every buy a gate from Walmart to have your dog no coming into a room or upstairs, well it worked really we until that certain someone had to puss to hard and break it, welp, look no farther I have spent 2 hours molding this gate piece for…
I needed a case for the Olimex Gatemate FPGA dev board that protected the connectors while still allowing for wires to be plugged-in. There are no holes to access any selector or jumper since I never change them, but buttons are still…
Astarion's starting gear Belt Buckle from Baldur's Gate 3! This listing is for the digital .STL files ONLY. The belt buckle is approx. 8cm at its widest point, and the 2 sides are designed to clasp/hook together. We resin print these…
Gale's Accessories from Baldur's Gate 3! This listing is for the digital .STL files ONLY. This kit includes the following: - Mystra Earring - x6 Buckle Pieces Don't forget to tag us in social media posts featuring our props/accessories as…
Gale's Staff from Baldur's Gate 3! This listing is for the digital .STL files ONLY. The total length of the Staff when built is approx. 210CM. All pieces are split to print in 25cm sections. YOU CAN USE LESS SECTIONS TO SHORTEN THE STAFF!…
I designed this to mount ZigStar Lan Gateway to the Ikea Skadis system. Currently there is only an opening for the USB-C port. If you need it for the LAN port as well, I have added the step file for customization. I used the Skadis T-Clip…
If you have a gate like this and want to move it to a few different places in the house here are the attachment clips. Only one set comes with the gate
Postava je prominentním záporným hrdinou v herní sérii Fallout , konkrétně ve hře Fallout: New Vegas . V televizním seriálu Fallout z roku 2024, dostupném na Prime Video, je postava ztvárněna hercem Johnny Pembertonem. Lanius je válečník…
Improve your golf putting game with an adjustable putting gate (50 - 70mm) that can be used on a practice green or carpeting. Holes in each side can be used with golf tees to secure to the ground or though carpeting. Usage Set width size…
This was a spire I created to fit on top of my halloween cemetery gate. The model is designed to fit on a 2x4 that was ripped down the middle. No supports are required to print this model.
Feet to help Evenflo safety gate stand on its own (Not against wall, railing, etc.) Print 2 of them, 1 for each end.
Simple model of a Japanese torii gate with stones and a tree stump I made a few years ago.
Did you see that Craighill video? The one about pen clips? Seems like that could be printed pretty easily. Grab a wiregate carabiner or 10 and some mechanical pencils from your local billionaire and spend 10 minutes printing at 0.12mm…
This Dragon Guardian Temple Entrance features a massive sculpted dragon head carved into stone, its mouth forming a dramatic stairway leading into a dark shrine interior. With curling horns, layered scales, fierce fangs and ornamental…
Bring timeless grandeur to your tabletop or display with this Grand Roman Triumphal Arch . Inspired by classical Roman architecture, this monumental gateway features detailed Corinthian-style columns, carved relief panels, and an ornate…
Ich wollte ein Fabriktor für eine H0e-Anlage entwerfen, das zu einigen Drucken meiner Säulen im Maßstab TT (1:120) passt. Wir haben also trotz Nutzung in H0 eigentlich ein TT-Modell vorliegen. Es sollte 52 mm / 57 mm breit und 32 mm hoch…
This is a holder for the Unifi Cloud Gateway for Multiboard. It is attached to the wall using two Small Thread Fix Points with the following Flush Snap Small Thread Holes. It is best to use Longer Small Thread Fix Points. It can be…
Open the gates to the abyss with this Demonic Skull Dungeon Entrance , a dramatic terrain centrepiece designed to transform your tabletop into a realm of dark fantasy. Carved into a monstrous horned skull, this towering entrance features…
Bring timeless atmosphere and architectural elegance to your tabletop with this Ancient Temple Shrine Gate , a beautifully sculpted terrain piece inspired by traditional East Asian stone pavilions. Elevated on a rugged rocky base, this…
Bottom half of the housing from Marcel without ethernet opening
Made these rails to install seagate SAS drives in the 4-in-3 | 3.5"/5.25" HDD bay mount model. Recommend in PETG!
This heavy stone dungeon gate brings industrial grit and fortress realism to your tabletop terrain. Framed with riveted metal beams, rotating gear wheels, and reinforced structural plates, the entrance suggests a fortified prison,…
Print and mount with proper screws. Original used 4x40mm “Spax” screws.
This phone stand is styled as a medieval wooden gate, turning a simple desk accessory into a small decorative scene. The gate-like frame supports a phone in an upright viewing position, making it useful for watching videos, following…
Upper Hinge for Safety 1st Stair Gate - SecurTech Flat Step This is built-from-the-ground-up replacement for the hinge, top right, attached to the gate side, for the Safety 1st Stair Gate, the SecurTech Flat Step model. This is the…
I made a more stable version of my earlier bookend with a third support side. The Pattern is inspired by how I imagine Orions gate. Print with 0.4 mm nozzle, you can use either support or not. Below you can see: left is with a support…
Genuine Gates idlers are slightly wider than the ones Goyetus's Y-Axis tensioner bases are designed for. I have remixed the original 20GT base to be compatible with such idlers. Thanks to Goyetus and MattyVee for this excellent tensioner…
A unique 3D printable creation — this Dimensional Portal Gateway Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
