1 / 4
2- and 3-way splitter with blast gates for 2 1/4" shop vac (Ridgid)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Splitter and self-cleaning blast gates made for 2 1/4" shop vacuums
- Ocena
- 4,75 / 5
- Polubienia
- 161
- Pobrania
- 851
- Wydruki
- 3
- Wyświetlenia
- 3700
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 9)Remiksy (0)Kolekcje (241)Powiązane
Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4) or glued on after you slot it in the gate.
Gate slots are sized so a ¼" chisel makes very quick work of cleaning out the supports.
Print with snug supports (see pics for what you end up with). PETG or ABS recommended, probably 4+ wall layers for strength. Printed mine with PETG.