P
Printables
Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander
Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander
Wyniki wyszukiwania: shopvac
Liczymy pasujące modele…
P
Printables
Wen Miter saw dust collector to Ridgid Shopvac adapter
This is an adapter to go from a wen mm1014 miter saw to a 2 1/4 inch ridgid shop vac hose
P
Printables
Eureka Accessories Shopvac Adapter
It prints fine without support if you orient the smaller opening towards the bottom.
P
Printables
DeWalt DW733 planer Dust Port adapter to SHOPVAC (50mm) camlock connector
Using Peter H 's great Camlock design as a basis, I modeled an adapter that nicely fits the DeWalt DW733 dust exhaust port. The adapter is asymmetrical, for optimal flow of the dust / wood chips Wall thicknesses are optimized for a 0,4mm…
P
Printables
DeWalt DCW200 to ShopVac adapter
Adapter to help connect a ShopVac (2.25" OD) to the DeWalt DCW200 and anything else that might use the same connection. It has these little “balls” that should pop in to place, BUT I warn you that these are quite brittle and may snap…
P
Printables
Shopvac Filter Lid
This is a lid for the bottom of a shop vac filter 90304 . My shop vac only came with the wet/dry filter, and when I bought a replacement dry-only filter (90304) I noticed I needed the lid to completely seal up the bottom of the filter…
P
Printables
Vacuum Hose Passthrough for 2.5" shopvac hoses
Passthrough adapter that accepts standard 2.5" shopvac hose on one side and 2.5" flexible vacuum tubing on the other. Designed to work with this 2.5" PVC hose from Amazon. Allows for a quick attachment point to powertool cabinets with…
P
Printables
Dewalt sander to shopvac adaptor
A simple adaptor i made for my DeWalt Random orbital sander so that i can replace the bag with a shopvac.
P
Printables
Delts Cruzer to Rigid shopvac adaptor
A simple adaptor i made for my chop saw to hook up to my shopvac. help with sawdust.
P
Printables
Ryobi miter saw to shopvac adaptor
My miter saw is the Ryobi TSS103T. The inner diameter of the part that attaches to the miter saw is about 37.9mm (1.5 inches). The outer diameter of the part that attaches to the shopvac hose is 55mm (2 11/64 inches). I had to do just a…
P
Printables
Shopvac attachment Worx WX822.9 Sander
I love my Worx sander ‘mouse’ and normally use it outside the house where a little dust bothers nobody. But now I have to sand the doorframes in my house and I don't want to cover everything in plastic, so I created this attachment to…
P
Printables
Shopvac Hose_Adapter 54mm to 35mm_Interior
I would suggest printing with additional walls or print solid if using PLA as this part can be knocked around a bit by the vibration of the saw..
P
Printables
2.5" Shopvac Hose
I was looking for an adapter that I could mount on my CNC that I could plug my Rigid Shop 2.5" shop vac into. I wanted something sturdy that will take come abuse and can be bumped into and not easily broken. The bolt holes are .25". In my…
P
Printables
Saw to ShopVac Adapter
Inside dimensions are 1-1/2" on the small end and 2-1/4" on the large end. I printed this in PETG with 3 perimeters and it seems to be quite strong.
P
Printables
Shark Vacuum Pet Hair Tool to Shopvac Adapter
Had a shark vac pet hair attachment that I wanted to use with my shopvac.
P
Printables
(Unofficial) LowRider 4 CNC - 1.5" ShopVac Hose Adapter + Spacer
An unofficial hose adapter + spacer/brace thingy to zip-tie your 1.5" shop vac hose to the LR4. There will be an official LR4 1.5" hose → 2.5"dust shoe adapter from v1e, but I made this in the mean time to get started. This is…
P
Printables
Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander
Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander
P
Printables
Camvac filter adapter for Shopvac filter
I made some modifications to fit commonly available ShopVac filters in North America (Shop-Vac High Performance 90398 Cartridge Filter) Amazon link I also changed the conical transition between the upper and bottom cylinders to a step to…
P
Printables
Qidi Plus 4 2.5" ShopVac Hose Exhaust Adapter
UPDATED 2/3/25 for slightly more foam gasket squish. This adapter will allow you to use a 2.5" ShopVac brand hose (commonly available in the USA) as an exhaust hose to vent your printer outside. The models include custom supports which…
P
Printables
ShopVac Clip - LowRider 2 Y-Plate
This Clip will secure a standard shopvac hose to the Y-Plate of the LowRider2 CNC. These are printed in PLA, but I suspect that anything will do! For more information please visit the V1 Engineering website and forums.
P
Printables
Hose and shopvac conversion for Ryobi stick vacuum
Fits Ryobi PBLSV717 vacuum cleaner and any other Ryobi vacuum that takes the same type of attachment. Shopvac adapter are designed for 1.25"/32mm shopvac attachments. Recommend printing in materials that give rough surface finish (e.g.…
P
Printables
Makita XGT Battery Powered Random Orbit Sander ShopVac Vacuum Adapter
Makita XGT Battery Powered Random Orbit Sander ShopVac Vacuum Adapter 32mm ID /41mm OD ShopVac Vacuum Adapter to Makita XGT Sander Compatible Model: BO001CG BO002CG BO003CG BO004CG GOB01CZ
P
Printables
DeWalt Stealthsonic Shopvac Elbow Adapter to 2" SCH40 PVC
Background: I was building a cart for my DeWalt 12 gallon Stealthsonic shopvac and found that the supplied hose for the duststopper was too short if I mounted it on top of the vacuum. This is a right angle (elbow) adapter for the shopvac…
P
Printables
Makita LS Sliding Compound Mitre Saw ShopVac Vacuum Adapter
Makita LS Sliding Compound Mitre Saw ShopVac Vacuum Adapter 32mm ID /41mm OD ShopVac Vacuum Adapter to Makita LS Sliding Compound Mitre Saw Compatible Model: LS1219 LS1019 LS003GM102
P
Printables
Adapteur shopvac Dewalt
Adapteur pour shopvac Dewalt 45mm à 48,5mm. Je l'ai crée pour connecter le collecteur de poissière milwaukee. Imprimer avec du PLA+ noir 15% infill réglage standard selon votre imprimante.
P
Printables
Dewalt DW735 planer-shopvac vacuum adapter, angled
This adapter snaps onto the output dust port on the DW 735 planer and connects to a vacuum hose with the output angled up and sideways so that the hose doesn't drape down over the outfeeding workpiece. The OpenSCAD file is parameterized…
P
Printables
Ryobi Belt Sander Vacuum Adapter to Ridgid Shopvac
This is an adapter for the Ryobi belt sander RYOBI 3 in. x 18 in. model # BE319 to a standard Ridgid shop vac hose. Printed in black ASA, 0.2mm layer height.
P
Printables
Dewalt Saws to ShopVac
Adapters for sawdust collection: DWS779 42mm OD to Shopvac 36.7mm OD DWE7491RS 65mm OD to Shopvac 36.7mm OD I printed these with PETG-HF with rafts. Fusion File attached.
P
Printables
Dewalt DCS565 (Circular) to Rigid Shopvac
Adapter for the DCS565 to a rigid shopvac 2.5" hose. Heavily inspired by https://www.printables.com/model/663323-dewalt-dwe6421dwe6423-to-rigid-nxt-shop-vac-adapte for the Rigid mount shape and design.
P
Printables
Suction Nozzle for https://www.printables.com/model/461256-shopvac-50mm-camlock-connectors-with-magnetic-catc
Thanks to @PeterH for his "SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH" and accessories. Using the same principle I made this suction nozzle so I can quickly disconnect the suction from the dust shoe and connect it to the…
P
Printables
Rigid 4070 1-7/8" shopvac locking hose end (tug-a-long)
This end is for a Ridgid 4 gallon model 4070 shop vac with 1-7/8" hose, there are likely other ridgid shopvac's that use this 1-7/8" locking hose as well; its also called a Ridgid Tug-A-Long Genuine OEM 31713 1-7/8 hose. The locking end…
P
Printables
Kreg To Rigid ShopVac Adapter
I have several Rigid ShopVacs around the shop and needed an adapter to connect my 2.5in hose to the Kreg Pocket hole jig. Slicer: Bambu Studio - No supports Edits made to standard BBL slicing: number of walls changed from 2 to 4 to add…
P
Printables
Wen Miter saw dust collector to Ridgid Shopvac adapter
This is an adapter to go from a wen mm1014 miter saw to a 2 1/4 inch ridgid shop vac hose
P
Printables
Low profile Centec Quick-Click to Shopvac-sized tool adapter
This is intended to slot into a shop tool that's compatible with Shopvac/Rigid-sized “2.5 inch” vacuum hoses, and adapt it to the Centec Quick-Click system. Anticipated questions: Doesn't one of these come in a typical Quick-Click kit?…
P
Printables
Shopvac attachment
This attachment was designed for 12mm keyways, but it can also be used for other applications.
P
Printables
DW735 Planer to Shopvac Attachment
This is a 90-deg elbow that fits onto the exhaust port of a Dewalt DW735 Planer and allows you connect to a standard shop-vac hose. It can easily be printed with no supports and has tapered ends for a snug fit on both ends.
P
Printables
"SHOPVAC" BLANKING PLUG
This is a fairly obscure part! I needed to neatly blank off the original outlet hole for my vacuum when I converted it to a collector for the mini cyclone. You can download the adapter for the lid to fit the cyclone to it HERE.
P
Printables
SHOPVAC (UK 14) CAMLOCK CONNECTORS Remix
I modified a camlock connector to fit a VACUFLEX PU 400 C ECO - 14UK hose. I used this hose: https://www.amazon.de/-/en/dp/B0922SV65K?ref=fed_asin_title&th=1 The connector includes a short threaded section that holds the hose securely in…
P
Printables
1 1/4" to 1 7/8" shopvac adapter
used to adapt a couple of my 1 1/4" to my 1 7/8" hose. tight fit and strong printed in petg
P
Printables
Dewalt Compound Mitre Saw Shopvac Adapter
Made this to connect the bag adapter on a Dewalt Mitre Saw. Pop the bag off the adapter, slide this on and connect a 2.25" hose. Done.
P
Printables
Lid For 90304 ShopVac Filters
The lid for my ShopVac broke so I designed a replacement that doesn't hook onto the mechanism for ease of print. You can print it on either orientation without supports.
P
Printables
Dewalt dwe7485 Tablesaw dust port adapter for 1.5" hose vacuum (ShopVac)
The popular Dewalt dwe7485 tablesaw has a 2.5" dust port (2.3" ID) that was WAY too big for the 1.5" OD hose I had standard on my ShopVac. Hardware stores didn't have the correct reducing couplers so I designed my own. There is an…
P
Printables
Vacuum Adapter - Vacuum Nozzles - Crevice Tools - Shop-Vac - Shopvac - Shop Vac
I was cleaning my truck and I needed to get in between the seats and the center console. I also wanted to use my big powerful Shop-Vac but use the smaller vacuum nozzles I have for my smaller Shop-Vac and my house vacuum. I created an…
P
Printables
Shopvac adapter for Bosch PEX300 AE sander
I designed this simple adapter so that I could connect my shopvac to my orbital sander. It fits the profile of the sanding platform as well as the connecting pipe, giving a very solid and snug fit. The hose connection is 35 millimeters,…
P
Printables
Intex Pool Adaptor for Rigid Shopvac hose
I've had the best results printing the model with the threaded section up rather than that as the base. Any elephant footing distorts the threads. This is a remix to all the use of a 2.5" Rigid shopvac hose to connect to the Intex pool…
P
Printables
WEN 6502T benchtop sander shopvac hose fitting
Solid piece or glue-together adapter for 1.25" shopvac hose to connect to Wen benchtop sander for dust collection. Tight fit and looser fit model included, as the tighter fit cracked a bit when the vacuum hose was inserted too forcefully…
P
Printables
Shopvac vacuum adapter for 1.75" hose to 1.25" utility
I printed in ABS on XMAX3. This has a 2.5mm wall for durability.
P
Printables
Makita DPJ180 - SHOPVAC CAMLOCK adapter - 3DW
The Makita DPJ180 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the Makita DPJ180 18V LXT Biscuit Jointer to the SHOPVAC CAMLOCK vacuum system.
P
Printables
Dewalt DWE7492 - SHOPVAC CAMLOCK adapter - 3DW
The Dewalt DWE7492 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
P
Printables
Dewalt DWE7492 - SHOPVAC CAMLOCK adapter for saw blade extraction - 3DW
The Dewalt DWE7492 - SHOPVAC CAMLOCK saw blade extraction adapter is an accessory designed to connect the dust extraction port of the saw blade extraction to the SHOPVAC CAMLOCK vacuum system. For assembly I used one M3x6, one M3x10 and…
P
Printables
Maxxt 5.0 grinder - SHOPVAC CAMLOCK adapter - 3DW
The Maxxt 5.0 grinder - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
P
Printables
Makita DSP600/SP6000 - SHOPVAC CAMLOCK adapter - 3DW
The Makita DSP600/SP6000 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
P
Printables
4gal Shopvac Cartridge Filter Mod
Description: The 4 gallon Craftsman shopvac comes with a sock filter and no provisions for installing a cartridge style cylindrical (cannister) pleated filter. My local hardware store had a large HEPA filter in stock so I decided to make…
P
Printables
Dewalt DWE7492 90° - SHOPVAC CAMLOCK adapter - 3DW
The Dewalt DWE7492 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
P
Printables
Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - ShopVac CamLock Adapter - 3DW
The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…
P
Printables
Sears Craftsman Shopvac Hose End
Endpiece from a Sears Craftsman Shop-vac hose used to connect accessories to. The original I had cracked. The outside diameter of the hose end is 2 1/4 inches. taken from https://www.thingiverse.com/thing:357574
P
Printables
35mm Shopvac Adaptor for Dyson Accessories
If you want to use your older Dyson vacuum accessories with your festool shopvac (or any other 35mm shopvac hose) then this adaptor is for you. Turns the 34mm Dyson diameter in a 35mm tube Has a little notch inside so the adaptor locks…
P
Printables
Festool shopvac to Bosch tools adapter
This thingy connects a Bosch PEX 400 AE orbital sander to a Festool shopvac hose. The adapters aren't strict to that particular devices. Other tools and vacuums could be compatible. Check pictures for reference. Print instructions print…
P
Printables
adapter for parkside mouse sander to shopvac
originally made for a PHS-160, but should work for all other parkside sanders with the dust port similar to the one in the picture, (diameter is circa 41mm) and it can fit 35mm shopvac tubes, specifically measured so theres minimal dust…
P
Printables
Shopvac adapter 35mm - extension
hoseadapter Vac Extension 35 to 35mm inner diameter... 40mm outer diameter / 50mm inner diameter.
P
Printables
Shopvac karcher mv6 50mm hose connector
Connector for kärcher shop vac. Need small spring and 3mm piece of wire. Works with 50mm dust collection hose.
P
Printables
Shopvac 40 mm to 37 mm adapter
Shopvac 40 mm to 37 mm adapter. Printed in TPU. Share your Make :)
P
Printables
Shopvac "Brute " hose adaptor replacement
THe original one broke and did not want the shop vac to go to waste, so pulled the old one out and it just had a lip holding it into the corrugated portion of the hose, so I measured it and printed it with a .8 nozzle PETG with .4 layer…
P
Printables
Shopvac to vacuum cleaner adaptor festool ctl mini to bosch solitaire sphera
This is an adaptor that allows connecting the hose of a Festool CTL Mini shopvac (and probably many other shopvacs) to the suction pipe and floor nozzle of a Bosch Solitaire Sphera vacuum cleaner. The problem is that the Festool shopvacs…
P
Printables
Mount for Bosch Solitaire Sphera pipe and floor nozzle on a Festool shopvac
To re-use the floor nozzle of my old vacuum cleaner, it should be stored with the new Festool shopvac. This thing is a mount to allow hanging the pipe and floor nozzle on the shopvac. This thing is a bit difficult to print in ABS because…
P
Printables
Keyboard Cleaning Vac Nozzle for Festool Shopvac
This is a nozzle for a Festool shopvac for cleaning keyboards, especially laptop keyboards. It is shaped so that it sucks between the keys, rows and columns, and the opening is too small for keycaps or track point caps to be sucked in.…
P
Printables
Festool Shopvac China Cyclone Hose Adaptors
This is a set of two hose and pipe adaptors to attach a China cyclone (from eBay) to a Festool shopvac (in my case, a CTL Mini (up to 2018)). This also includes a set of attachment parts to mount something onto a systainer or a shopvac…
P
Printables
Dewalt Mitre Saw to standard ShopVac 45 degree angle
My mitre saw is up against my window, so I needed a good way to redirect the airflow and hook it up to my shopvac. Shopvac nozzle should easily friction fit for fast connect/disconnect. If not, add some painters tape. Using a DWS780, but…
P
Printables
Eureka Accessories Shopvac Adapter
It prints fine without support if you orient the smaller opening towards the bottom.
P
Printables
Makita/Nilfisk shopvac 63mm hose adapter
This an adapter to a 63mm air hose to a makita shopvac. It will work definitely with models: VC2000L VC2013L VC2512L, VC4210 and possible VC30xx series. Also works with Nilfisk ATTIX 33 and 44 as well as many other brands Print…
P
Printables
Makita/Nilfisk shopvac 63mm hose adapter
This an adapter to a 63mm air hose to a makita shopvac. It will work definitely with models: VC2000L VC2013L VC2512L, VC4210 and possible VC30xx series. Also works with Nilfisk ATTIX 33 and 44 as well as many other brands Print…
P
Printables
DeWalt DW733 planer Dust Port adapter to SHOPVAC (50mm) camlock connector
Using Peter H 's great Camlock design as a basis, I modeled an adapter that nicely fits the DeWalt DW733 dust exhaust port. The adapter is asymmetrical, for optimal flow of the dust / wood chips Wall thicknesses are optimized for a 0,4mm…
P
Printables
FESTOOL Kapex KS 60 E to SHOPVAC camlock (male) Adapter + 90° version
This is an adapter to connect the standard FESTOOL Kapex KS 60 E miter saw vacuum port to a SHOPVAC camlock connector. On side A is the festool part and on side B the camlock male part. An additional thanks to…
P
Printables
hose holder for shopvac
printed at .2mm, 4 perimeters, 70% infill, supports everywhere = very strong.
P
Printables
ShopVac Bag Retention Clip
ShopVac Bag Retention Clip - Keeps bag from falling away from hose connection. This clip should insert into the slot where the cardboard retainer for the bag is inserted. This is deigned for the 16 gal ShopVac wet/dry vacuum with the 3…
P
Printables
DeWalt DCW200 to ShopVac adapter
Adapter to help connect a ShopVac (2.25" OD) to the DeWalt DCW200 and anything else that might use the same connection. It has these little “balls” that should pop in to place, BUT I warn you that these are quite brittle and may snap…
P
Printables
Dewalt DW735 to ShopVac Coupler
A coupler to connect a DeWalt DW735 planer to a shopvac hose (2 1/2 inch). It is a friction fit so I made it a bit thicker so you can get a grip on it without worrying about cracking it.
P
Printables
Festool Shopvac Extension
This is a optimized shop vac nozzle for the festool hose with a 35mm rubber connector. The object is based on a basic design by @johnmeyer I modified the Fusion360 files with the proper 35,5mm diameter and shorted the length of the nozzle…
P
Printables
Rigid ShopVac leg mount
This is a leg mount for my Rigid ShopVac that I made a two-bucket Thien Baffle dust collection system for ( https://www.thingiverse.com/make:724045 ). I wanted to be able to mount the two-bucket dust collector above the ShopVac so that it…
P
Printables
Shaper Origin 2 1/4in shopvac adaptor
A simple adaptor that fits into the end of your hose and onto the Shaper. Inspired by another design on here which is just a cylinder; this one has a slight taper so that it grips both the hose and the Shaper, and has a much more solid…
P
Printables
Collar for DeWalt DCW600B 20V router with shopvac vacuum port
This collar friction-fits around the existing collar, widens it to 5" x 5" (the original collar's dimensions, as near as I could tell, were not a round number in either metric or imperial) and adds a port for a 2.15" shopvac hose. If you…
P
Printables
Dewalt DXV10SA Shopvac to 2 1/2" Hose adapter
An adapter to connect a Dewalt DXV10SA Shopvac to a 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360.
P
Printables
Fein Turbovac to 2-1/4" Shopvac adapter
Simple adapter with a complex retention clip to connect a 2 ¼" shopvac hose to the Fein turbovac directly. The shopvac hose hose already connects just fine to the turbovac, but I wanted the locking/bayonet connection. Print the adapter at…
P
Printables
Domino shopvac adaptor
I wanted the ability to hook my domino up to either my little cordless ryobi shopvac, or my central DC (using the tapered connectors commonly available). Print this standing on the narrower end as pictured , and I used tree supports in…
P
Printables
Makita 3709 DustExtraction for ShopVac
Clip on dust extraction for the Makita 3709 edge router/trimmer base to use with a 35 mm shop vac. Due to I was not able to find a design with either the right diameter for my 35 mm shop vac or the possibility to see what the router bit…
P
Printables
Rigid Shop Vacuum / Shopvac Drum Latch
I broke one of the drum latches on my Rigid HD NXT 6 Gallon Shop Vac that clips on the motor head. I was not able to find a printable part out there, so I measured and sketched up a functional replacement part in Fusion 360. Printed here…
P
Printables
Plug for Shopvac filters
A plug for the bottom attachment hole on a shopvac style filter so the filter can be used for other things like homemade dust collector or air cleaner. sortof needless to post as its a 2 minute make in 123d but, now its downloadable.…
P
Printables
Rigid r26011 Sander Shopvac (Dewalt DXV09P) Adapter
I recently tried to use my shop vac for dust collection from my sander. While the hose almost fit on the sander, it didn't quite fit. So I designed this part to ensure a solid connection on both sides. Printed vertically in PLA, no…
P
Printables
![Shopvac Hose Adapter Generator [Parametric]](https://media.printables.com/media/prints/322217/images/2782354_8da81c7b-012f-4dbe-a5bc-3735b8ff12a7/0329ca18c119e225468b09b64970899e_display_large_322217.jpg)
Shopvac Hose Adapter Generator [Parametric]
These hose adapters REALLY SUCK!!! This is a spreadsheet parameterized Freecad 0.18 file for generating printable adapters/couplers for vacuum hoses and accessories. It can make them in any size and gender, as long as it is a straight…
P
Printables
Cyclone Filter 2.5" Shopvac Hose Adapters
This is a set of 2.5" hose adapters (large shopvac hose) for Dronnn's well designed cyclone vacuum filter design, which you can download here: https://www.thingiverse.com/thing:2829268 These adapters feature an aerodynamic transition to…
P
Printables
Make-it-a-Mold Choclifier (1-piece vacuformer for shopvac)
THESE INSTRUCTIONS SHOULD BE FOLLOWED BY ADULTS OR UNDER ADULT SUPERVISION. So there are no good vacuforming rigs out there for 3d printers, probably because you can't make a good vacuforming rig with a 3d printer! You can, however, make…
P
Printables
Worx vacuum to osVAC adapter shopvac WX031.9
Adapter for the great Worx battery powered shop vac WX031.9. Fits both the hose connect on the vacuum itself as well as the vacuum hose. Second adapter is for the nozzle so it can be attached to an osVAC hose. Since the vacuum hose has a…
P
Printables
ShopVac Exhaust Deflector
My shop vac exhaust shoots out straight and kept blowing sawdust and small things around so I modeled this to deflect it up. It's a loose fit with a simple clip to hold in place and seems to work perfectly. This has a 2 ¼ ″ diameter…
P
Printables
Dewalt dw735 to shopvac
Simple funnel to connect Dewalt dw735 to 35 mm/ 40 mm shopvac. Outer diameter is 40 mm Inner diameter is 35 mm PETG recomended, or as you wish