SHOPVAC CAMLOCK ACCESSORY ADAPTOR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this adaptor to connect any of my existing shopvac fittings to the SHOPVAC CAMLOCK fitting.
- Ocena
- 5 / 5
- Polubienia
- 145
- Pobrania
- 908
- Wydruki
- 2
- Wyświetlenia
- 3549
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DOWNLOAD CAMLOCK end fitting HERE.
This part will make any of my old VACUUM ADAPTERS compatable to the new CAMLOCK end. It will be useful if you want to change over before making new fittings or if you like the new setup but don't want to replace your old ones.
The thread should work on anything designed to screw onto a 50mm vac hose.
Print without supports.
I have printed in PLA 0.2mm QUALITY settings. The print may be a little tight when first inserted into the Camlock fitting, that is by design as there is only 0.1mm clearance, but it will ease after a few insertions.