1 / 5
Ryobi Miter Saw (TS1340) to ShopVac vacuum adapter — zdjęcie 1
1 / 5

Ryobi Miter Saw (TS1340) to ShopVac vacuum adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

There are a ton of other vacuum adapters for different miter saws, this one is made simply to fit my older Ryobi…

Ocena
0 / 5
Polubienia
7
Pobrania
83
Wydruki
0
Wyświetlenia
1051
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

There are a ton of other vacuum adapters for different miter saws, this one is made simply to fit my older Ryobi TS1340, I wanted an easy dust collection method as the bag didn't work too well.

This is a very simple pressure fit 'tube', that was inspired by the shopvac's own linking method (with extensions).

The cylinder has one side OD of 36mm and other OD of 38mm, making it thicker on one side vs the other. The shell is also constant at 2.6mm, making this a nice pressure fitting.

Fits a shop vac OD tube of about 32mm.

Print instructions

Category: Machine Tools Summary

There are a ton of other vacuum adapters for different miter saws, this one is made simply to fit my olderRyobi TS1340, I wanted an easy dust collection method as the bag didn't work too well.

This is a very simple pressure fit 'tube', that was inspired by the shopvac's own linking method (with extensions).

The cylinder has one sideOD of 36mm and otherOD of 38mm, making it thicker on one side vs the other. The shell is also constant at2.6mm, making this a nice pressure fitting.

Fits a shopvac OD tube of about32mm.

Print Settings

Printer:

Ender 3

Rafts:

No

</div>Supports:

No

Resolution:

0.24

</div>Infill:

50%

Filament: Any PLA Any

Notes:

2 walls with 50% infill, simple tube print, no supports. I used a 5 line brim to hold the model to the build plate

Tagi