SHOPVAC CAMLOCK VACUUM CUFF ADAPTER TO 45MM (ID)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits any 45mm fitting to my 50mm SHOPVAC CAMLOCK fitting see notes below.
- Ocena
- 5 / 5
- Polubienia
- 152
- Pobrania
- 821
- Wydruki
- 4
- Wyświetlenia
- 3700
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DOWNLOAD CAMLOCK and find more accessories HERE.
This fitting tapers from 45 to 46mm so it should fit anywhere a standard vacuum cuff would, and connect to the CAMLOCK end. It may be a slightly loose fit depending on the length of taper of your part. I use a few wraps of PFTE plumbers tape to ensure a perfect fit, but a smear of bathroom silicone will make a permanent connection.
Prints without supports.
I have printed in PLA 0.2mm QUALITY settings. The print may seem a little tight when first inserted into the Camlock fitting, that is by design and it will ease after its been worked around a bit.