1 / 3
Ryobi Mitre Saw to Dewalt ShopVac Attachment
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connects the vacuum port on a 10" Ryobi sliding mitre saw to the suction hose of a Dewalt shopvac hose for easy clean-…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 910
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (40)Powiązane
Connects the vacuum port on a 10" Ryobi sliding mitre saw to the suction hose of a Dewalt shopvac hose for easy clean-up. Includes a 30° bend to keep the hose out of the way when using the saw.
Print instructions
Print standing up with at least 0.3mm layer height and at least 3 walls. No infill required with at least 3 walls. PETG is preferred to allow for flexing without snapping during connection/removal. Make sure the cooling fan is enabled to handle the overhangs!!!