1 / 3
DeWalt Stealthsonic Shopvac Elbow Adapter to 2" SCH40 PVC
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom elbow adapter to convert from DeWalt Shopvac to 2" SCH40 PVC
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (1)Kolekcje (26)Powiązane
Background: I was building a cart for my DeWalt 12 gallon Stealthsonic shopvac and found that the supplied hose for the duststopper was too short if I mounted it on top of the vacuum.
This is a right angle (elbow) adapter for the shopvac that connects to schedule 40 PVC for a quick and easy extension. To make the hose connect to the PVC, you just need to heat up the PVC until its a little glossy, then push the hose fitting into it fits snug.
Best practices for this model:
- Use the 3MF file to see the orientations for printing successfully, if you can't utilize it please follow the next steps.
- Print in two separate pieces
- Print with clip perpendicular to build place supported by tree supports
- Glue together with CA glue
- Yes you can print in one piece, but the quality tends to suffer