Shopvac Connector for Harbor Freight Benchtop Abrasive Blast Cabinet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 90 degree elbow for connecting a full sized Shopvac to the Harbor Freight Benchtop Abrasive Cabinet. This…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 90 degree elbow for connecting a full sized Shopvac to the Harbor Freight Benchtop Abrasive Cabinet.
This fastens to the left side of the cabinet replacing what is intended to be the throughway for an air hose. I connect the nozzle to a short 3' hose that is now permanently connected through the rear bulkhead, and threaded the air fitting in such a way that it remains in place and connect a female coupling of the hose from the compressor at the back of the cabinet.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20%
Filament: Amazon Basic's PLA Orange
Notes:
Print as oriented in STL with supports.
Category: Tools