ShopVac Small Crevice Nozzle - Skinny Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm).
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 303
- Wydruki
- 2
- Wyświetlenia
- 1071
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard to access areas.
Originally I made a single version of this,but it worked so well I made two other versions. The three versions are :
- Small Crevice Nozzle - Short Version
- Small Crevice Nozzle - Long Version
- Small Crevice Nozzle - Skinny Version (this one!)
For the first two, the narrow end of the nozzle has a width of .5 inches (12.7mm), for the third version the width is 0.25 inches (5.1mm).
The OnShape 3D CAD files for this are here :
Print instructions
Print in PLA using the 3mf file provided; otherwise :
- perimeters = 3
- infill 0%, concentric top and bottom
- brim recommended
- no supports required