1 / 1
W25 spindle soft jaw chuck
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fully printable soft jaw chuck you can machine to fit delicate work on the lathe
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I made this to hold delicate parts on the lathe. I print everything at 100% and then turn the inside to the correct size. the ring on the outside compresses the inner portion to hold the parts.
I used PLA although I would suggest something else that machines better such as ASA.
It would also be good to make the outer ring from a low friction materials such as IGUS 150i although that does get a bit expensive