Shim for Vevor JH-1B multidirectional microscope
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.40 – €0.49 net (excluding VAT)
For file: cale-microscope-2_0.4n_0.2mm_PETG_COREONE_22m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.45 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 21.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Printable offset shim for the Vevor JH-1B multidirectional microscope, designed to shift the microscope position for a m
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This part is an offset / spacer shim designed for the Vevor JH-1B multidirectional microscope.
Its purpose is to slightly shift (de-center) the microscope position, making it easier to fit into your workspace and improving comfort depending on your bench layout (clearance, access, alignment with the working area, etc.).
It helps achieve a more practical microscope position while keeping the mount stable and solid.
⚠ Important: since this shim adds thickness, you must replace the original screws with M5x60 screws.
Recommended print settings
For best rigidity and to avoid flex:
Material: PETG
Layer height: 0.2 mm
Walls: 4 perimeters
Infill: high, ideally > 30% (more if needed)
Notes
This part is designed to be strong and functional, not cosmetic.
If you still notice any movement, increase infill or use 5 perimeters.