Counting matching models…
Using a laser pointer (preferably green since it is more powerful) and a disposable syringe, it is possible to build, in a very simple way, a microscope of approximately x1000 magnification, with which microorganisms can be observed in a…
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for one variant
This adapter can be used in conjuction with a reverse lens adapter and a bellow or macro tubes to attach a RMS mount microscope lens to a digital camera.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for one variant
This is an adapter for the raspberry pi camera (rev 1.3; you can get it for 3-4 USD on Aliexpress) and is used to put it on the eyepieces of any stereo microscope with 32-33mm diameter. It has spaces so as not to press on the…
print with support 15.00 mm thick 29.30 mm - 31.00 mm object holding diameter 9.00 mm back mounting diameter
Here the dust caps for microscope objective and nosepiece. They have RMS /DIN thread, 0,800 Inch 36 tpi. The fit is very loose, to allow low-quality prints to work. Yes yes I'm studying OpenSCAD... but for now, .stl only Print Settings…
This print allows you to use a 4x microscope objective as a macro lens with a Nikon-Z mount camera. Based on the concept from this model , but designed not to use screws. I've been using the Nikon Z-fc. The cone, and the base of the model…
laboratory/microscope glass box for storing glass with tissue sample
The adapters I've made since the original photo port adapter was lost. For old Leitz microscope, mine is SM with 170mm system; maybe works also for 160. The trinocular head has cylindrical fitting, 38mm diameter. One model (the tall one)…
An upgrade from the V1 with smother rotation and just as precise. Hardwear needed: 6 - M3 x 6mm screw 2 - M3 flat washers 2 - M3 Nut 1 - M3 x 12mm screw 3 in 1 oil as lubercent Printed parts needed Turret head x 1 Turret neck x 1 Clicker…
Optical Projection Tomography (OPT) uses similar reconstruction methods as CT x-ray imaging but with visible light for microscoping samples. By taking hundreds of pictures of a sample from every angle of rotation, a 3D representation of…
I recently got an Amscope ME580 ‘metallurgical’ microscope. I'm an electrical engineer/RFIC designer and my main use of [this] microscope is to take photos of and analyze integrated circuits… Unlike biological/metallurgical samples,…
I like these “cheap” USB microscopes as they are very useful to investigate problems on PCB's. However, the stand that comes with these microscopes is crap. I made this vertical adjustable stand for one of these USB microscopes that makes…
A simple sunblocker for a microscope to block light coming from the side. The pictures are version 1, I will upload new ones soon. The microscope I use is a motic SMZ-168. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports:…
I built this turret for my OMAX M82ES, but as long as you have a 160mm corrected RMS microscope I believe that this should work. you will need 2 - M3 x 6mm screw 2 - M3 flat washers 1 - M3 Nut 1 - M3 x 12mm screw vaseline Once your parts…
This project reuses old camera lenses to project microscope slides and 35mm film. Instead of looking through squinty ocular ports, projection microscopes are projectors that shoot the image of whatever you're looking at out into the room.…
This is a slider for a Nikon Microphot microscope. I am unclear if it fits any other '80s -pohots. 20mm opening. Detents function perfectly.
The Microscope Slide Holder is designed to hold 13 standard microscope slides (25 mm x 75 mm). The compact and sturdy structure ensures your slides remain in an organized manner without slipping or tipping. It’s perfect for use in…
Cheap microscope arms like this come with a 40mm ring. This adapter enables microscopes like the Mustool G1200D to fit in the holder. The 40mm ring i got is 40.1 mm so I made the adapter 0.5mm wider for a snug fit so it technically is a…
Inspired by https://makerworld.com/en/models/589181 I like to believe my version has a little more style and function to it. The holding ring has a hole for an M3 threaded insert but this hole is blind, ending in a flexure which should…
Microscope objective storing tube with RMS thread for microscope and M32x1.5 thread for closing it. TESTED on Olympus UMPlanFl objective - with 0.1 mm layer thickness print on threads they work really well and fit each other great. After…
This model is in fact a collection of multiple models which are related and are all designed for an easy and tidy storage of microscopy accessories at classroom scale. All models share the following print settings: Print from PLA, no…
Replacement stand for a Vision Engineering Mantis Microscope making use of a ¾" gas pipe and nipple mounted through the desk Additional hardware required: ¾" wood drill to go through desk ¾" Iron pipe DN20…
This is a small threaded plug that allows you to pull the reticle from Mitutoyo toolmaker microscopes. Threads were guestemated as M17x0.5, but are likely some crazy mix of imperial diameter and metric thread pitch. It worked for me… YMMV
Microscope Stand: https://www.aliexpress.com/item/1005006389905629.html Microscope: https://www.aliexpress.com/item/1005005505572912.html The adapter can be mounted on a ¼'' screw. I printed it with 100% infill density Source Code:…
I wanted to have a nice budget microscope and bought a cheap usb one . It is good enough for the price (7€) but even with a good light source it didn't get a nice quality image. I disassembled it and found that the main parts consists of…
I have been working with SMD parts under a microscope for quite some time, and have always used my big and bulky hakko fume extractor. While it works, it is very loud and takes up my precious desk space. I have looked up to see if…
Bought a digital microscope (link to the exact model below) to use for inspecting Pokemon cards for grading, repairing fine solder joins on various PCB's ranging from 3D printer control boards to other various PCBs in need of minor…
I bought a nice microscope polarized light on Aliexpress but I didn't like that polarized lens is always in the optical path even when I don't need it. So, I decided this mount that allows to flip-in and flip-out the polarized lens when…
I got a 2x T-Adapter Microscope Lens for my Mirrorless camera and wanted to mount it to my trinocular microscope. I couldn't mount it to the existing hole as I couldn't get it to focus while mounted, so I had to make an extension tube to…
Threaded Collet for TOMLOV Microscope stand.
This adapter can be used in conjuction with a reverse lens adapter and a bellow or macro tubes to attach a RMS mount microscope lens to a digital camera.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
I have plenty of microscope parts mostly from 1970 era and they did not have any dust covers so I designed this cover to protect the tops. Another model is to protect bottoms here:…
Vytištěno z materiálu PLA, výška vrstvy 0,25 mm. Pro zuby hřebenu, pastorek a osu výška vrstvy 0,15 mm. Matice přilepit do jednotlivých dílců dle výkresu. Výkres sestavy stojanu (výkres ve formátu pdf uložený v souborech): Typ mikroskopu…
I have a spring loaded arm, originally from a tablet mount, with a ball socket at the end. I wanted to attach the cheap Ebay USB microscope to the arm instead so I created this ball socket mount.
Cheap microscope arms like this come with a 40mm ring. This adapter enables microscopes like the Mustool G1200D to fit in the holder. The 40mm ring i got is 40.1 mm so I made the adapter 0.5mm wider for a snug fit so it technically is a…
Overview Sturdy, rigid design made specifically for 3d printing. Prints in 4 parts and everything snap fits together tightly and securely. No overhangs or special print settings needed. Great for viewing specimen slides. This design is…
This system allows a quick switch between 0.5x/1x/2x lenses for AmScope or Eakins stereo microscopes. Slightly twist the lens to unmount it from the microscope. Note that the lens is positioned lower with this system on, so that some…
I thought that the focus knob was to small so I threw this together to fix that. Will fit any microscope that's around 33mm. Total diameter is around 70mm. Has holes for two 4mm bolts to hold it on. printed in regular pla with 5 walls.
My first design. Allowing to hang the microscope at ikea skadis. I am working on another design to use the Ashfly microscpoe to easier check plotter blades. It is planned to handle CB09 and roland blades.
This is a RMS to C-mount microscope objective adapter. IT allows to connect objectives directly to a camera with C-mount. The thread tightness is variable and can be changed in the parameters. Modify/Change Parameters. If you use this…
Inspired by https://makerworld.com/en/models/589181 I like to believe my version has a little more style and function to it. The holding ring has a hole for an M3 threaded insert but this hole is blind, ending in a flexure which should…
I wanted to have a nice budget microscope and bought a cheap usb one . It is good enough for the price (7€) but even with a good light source it didn't get a nice quality image. I disassembled it and found that the main parts consists of…
Just modified cnlmoore's model to fit the lighting on my tomlov 7 inch scope.
Doplněk pro model stojanu mikroskopu dle 3-1224-004 (viz odkaz níže). Rozměrově nastavitelné pro telefony 60x135 mm až 100x175 mm. Nastavitelná poloha úhlu pozorování. Vytištěno z materiálu PLA, výška vrstvy 0,2 mm. Matice (2 ks) přilepit…
I bought an old Nikon SMZ-10 trinocular microscope and wanted to connect a camera to it. But it didn't fit out of the box and I couldn't find any information about connecting a camera to it on the Internet. The microscope came with a "TV…
I bought a nice microscope polarized light on Aliexpress but I didn't like that polarized lens is always in the optical path even when I don't need it. So, I decided this mount that allows to flip-in and flip-out the polarized lens when…
This is a custom adjustable stand designed for INSKAM USB microscopes commonly available on AliExpress. The stand provides much better stability and height adjustment compared to the original tripod, making it suitable for electronics…
Bought a digital microscope (link to the exact model below) to use for inspecting Pokemon cards for grading, repairing fine solder joins on various PCB's ranging from 3D printer control boards to other various PCBs in need of minor…
A 1x3x3 stackable Gridfinity holder for the remote of the Elikliv EM4K-AF microscope.
The bottom of a Nikon vertical (epi) illuminator fits into an American Optical Spencer series 10 microscope, but there isn't enough room for the AO head assembly to fit into the top of the illuminator. Including openscad file for…
A shorter head and YIZHAN digital microscope mount for the Articulated arm . Bill of material 1 screw HH ¼" L1" UNC ( Print settings All STLs are oriented, no support needed (support include in microscope holder)
I like these “cheap” USB microscopes as they are very useful to investigate problems on PCB's. However, the stand that comes with these microscopes is crap. I made this vertical adjustable stand for one of these USB microscopes that makes…
I have been working with SMD parts under a microscope for quite some time, and have always used my big and bulky hakko fume extractor. While it works, it is very loud and takes up my precious desk space. I have looked up to see if…
Vesa Mount 100x100 for Andonstar AD407 Pro microscope + Phone with thermal camera This mount is useful even if you don't have a phone with a thermal camera, but instead want to place a regular phone and record what you're doing on the…
GDR's Carl Zeiss Jena used a special non-standard thread of M19x0.75 for their infinite tubus length objectives. This adapter allows to use it in modern M27 threaded microscopes. Use PLA and a fine layer height of at least 0.1mm for…
This is an adapter for the Modular Stand for Electronic Microscope by Chrlee to mount a Plugable USB Microscope. Printing on a Creality K2 Pro in PLA at 0.2 mm with standard profiles resulted in an excellent fit.
This is a mount for the cheap Aliexpress USB Microscope. https://www.aliexpress.com/item/1005005609315067.html There are plenty of options for this microscope in here but I decided to print this arm because it's fully printable and very…
Adapter for the flexible and sturdy arm system to mount universal Led ring lights, Microphones or Microscope boom mounts
Dm9 microscope holder for generic microscope/flexiarm/ringlight mounting
Microscope objective storing tube with RMS thread for microscope and M32x1.5 thread for closing it. TESTED on Olympus UMPlanFl objective - with 0.1 mm layer thickness print on threads they work really well and fit each other great. After…
This model is updated to be printed without supports. Fixed magnet holes for better printability. A STEP file cannot be made, when exporting as STEP it breaks the file. This is probably because the original file was an STL. Otherwise, I…
Inspired by Big Clive https://youtu.be/p1UIa8nRAgA Adjust the focal length of your cheap digital magnifier. I didn't need to open my magnifier up, the lens turned with careful torque breaking the glue seal. YMMV. Be careful, if you press…
Extra parts for this microscope (I don't know I got carried away.) I honestly don't know what to call this, extra parts? If you want to use another soldering iron, you'd have to design it yourself unfortunately :( (just take a picture of…
I got a 2x T-Adapter Microscope Lens for my Mirrorless camera and wanted to mount it to my trinocular microscope. I couldn't mount it to the existing hole as I couldn't get it to focus while mounted, so I had to make an extension tube to…
----for english, please scroll down---- Die EM4K / TM4K-Digitalmikroskope haben zwar ein wirklich miserables Objektiv, aber im Vergleich zu meinem alten Andonstar AD407 mag ich die bessere Reaktionszeit bei Bewegungen, die deutlich höhere…
Introduction This is an adapter for: Tomlov TM-DM9 Microscope iFixes iL37 Polarized Ring Light Tomlov TM-DM9 Microscope iFixes iL37 Polarized Ring Light Here are some of the key measurements, if you have different devices but think this…
Lidl Bresser USB Microscope mount for GoPro system
I happened to find the Vevor microscope on sale for less than 210 USD. Given it's functionality it outshines every other microscope stand for the same price (Available to me). Naturally I wanted a way to adapt the stand to my vintage…
This is a microscope slide and coverslip caddy. It holds 4 standard slides and slips. Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: No Supports: No Resolution: 0.1 mm Infill: 60% Category: Biology
Mount can be placed on the microscope eyepiece. To hold better in place you can use two small screws. Dimensions are for Samsung Galaxy A71, but I am attaching Fusion360 project as well if you want to update for your mobile phone. To be…
I built this turret for my OMAX M82ES, but as long as you have a 160mm corrected RMS microscope I believe that this should work. you will need 2 - M3 x 6mm screw 2 - M3 flat washers 1 - M3 Nut 1 - M3 x 12mm screw vaseline Once your parts…
If you are asking yourself what is that 3d printed microscope in the photos, it is this one . This adapter allows to attach a Micro 4/3 camera (tested with an OM-D E-M5 mkII) in place of the 23.2 mm eyepiece of the microscope. For best…
An upgrade from the V1 with smother rotation and just as precise. Hardwear needed: 6 - M3 x 6mm screw 2 - M3 flat washers 2 - M3 Nut 1 - M3 x 12mm screw 3 in 1 oil as lubercent Printed parts needed Turret head x 1 Turret neck x 1 Clicker…
I bought a used Global M704 microscope, and the objective lens did not have a cap. This model fits snugly when printed in PLA. The lens on my microscope is M1028-250, but I think it would probably fit any of their objective lenses.…
I bought a Global M704 microscope and don't need to use the halogen fibre optic illumination. This model will screw in and plug the unused fibre socket on the microscope body, keeping dust and light out. This model will probably work on…
Fully parametric slide box, with a small spring to hold them in place. The lid is held on with a friction fit. The model was created in fusion 360 where the parameters can be edited To adapt to your slides/printer: Measure your slides…
Specifically for the AD246S-M with the "A" lens, but I'm sure it will work on other microscopes as well, or with the other lenses.
A colleague needed a box for microscope slides and found this model first: https://www.printables.com/model/810152-microscopy-slide-box . It worked sufficiently, but after some usage, the following we needed some adjustment according to…
Changed the size of the holder to fit my microscope with a diameter of 36,4mm
LED microscope illuminator with 18650 battery. With and without board TP4056 https://alii.pub/71w45t?erid=2SDnjd4121p 20 mm diameter matte lens. Variable resistor 1 kΩ. Resistor for LED 200 Ω. Case size 74 x 82 x 35 mm.
Simplistic design of a Microscope for teaching or introduction to science. Made for 3d printing, without any use of scaling, only for ludic learning. PRINTING SETTINGS: ALL PARTS: 3 Perimeters, 4 Top layers, 4 bottom layers minimum. BOLA1…
universal slide holder for olympus BH2 microscope. may work on other models with a mounting hole distance of 36mm.
This is a print in place support that helps to arrange a imple but effective practical experiment for children of all ages. Using only a disposable 10ml syringe and a laser pointer we can show the students a high magnificaton projection…
This is an adapter to mount the Andonstar ADSM302 microscope to a microphone stand/arm The hex opening is for a m10 nut. Most microphone arms will fit, I just replaced the imperial bolt to a metric m10 bolt on mine. Some disassembling and…
This is a reference model of Waveshare's 100X Industrial Microscope Lens for Raspberry Pi HQ Camera. It is based on my own manual measurements. I am hopeful that someone will find it useful for creating their project. DISCLAIMERS: The…
Project: 3D Microscope in Separate Parts This project is a remix of the original microscope model created by @medinad654 on Cults3D. The original model, which you can find here , was designed as a single piece. This modified version aims…
The BrickScope - a simple but powerful platform for microscopic discovery. BrickScope is a system of 3D printed parts that can be used to make a real, working microscope at minimal cost and no specialised skills. The BrickScope parts are…
This knob makes it possible to fold the microscope stand without having a key
Specifically designed to fit Sunstone Orion Pulse Arc Welder microscope. Use main camera only, 2x zoom to limit vignette. Phone should fit very snug with minimal play, use 2-3 piece of electrical tape on the inside top edge tighten phone…
A simple stand for a digital microscope. Mounting on articulated arm, with 1/4 inch fitting. Works on 28mm lenses. I successfully printed in Hyper PLA on the Creality K1C. 300mm/s infil 25% 5mm screw for fixing the lens, with 8mm nut.
This is a simple microscope slide holder made for collecting forensic samples in the field that need to stay flat after collection (such as blood) and during transport back to the lab. It fits 10 standard microscope slides and has a…
I printed the original stand, but it was too wobbly and jank, so I remixed it. Parts needed: 2x M4 countersunk screws L=12-20 mm 4x M3 countersunk screws L=8-12 mm 2x M3 button/socket head screws L=12-20 mm 2x M3 countersunk screws…
Designed a microscope slider holder that will fit in Gratnells tray insert. The science department needed one to help organise and also it helps show if a slide is missing from a tray. easy to print. No supports.
Stativ pro USB mikroskop, kombinace 3D tisku a dalších komponent. Hlavní sloup je dřevěný hranol 35 x 35 mm, dal by se nahradit i nějakým pevným tiskem. Posun pro zaostřování je řešen závitovou tyčí M8. --- Tripod for USB microscope,…
Description This model is free and took a lot of work to create. If you appreciate this model, please leave a download and a like! If you print this model, please post a make. With this 3D-printed adapter, you can easily attach an…
This design couples an Amscope WF10X eyepiece with a plate to support and align your cell phone (Google Pixel 7 in this design).
