Waveshare 100X Industrial Microscope Lens for Raspberry Pi HQ Camera reference model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a reference model of Waveshare's 100X Industrial Microscope Lens for Raspberry Pi HQ Camera.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 107
- Makes
- 0
- Views
- 477
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This is a reference model of Waveshare's 100X Industrial Microscope Lens for Raspberry Pi HQ Camera. It is based on my own manual measurements. I am hopeful that someone will find it useful for creating their project.
DISCLAIMERS:
The dimensions of the whole assembly are not compliant with simplified dimension drawing on Waveshare's site. In contrary to my model, the height listed on the site includes the safety caps, which are not pictured there properly. Also, the outermost diameter I have consistently found to be a tiny bit wider in reality than on the picture.
I have not modeled the innards of the lens, as I did not want to risk contamination of my unit's optics, and should not be critical for reference purposes. The length of the securing grub screw and depth of it's hole are also unknown.
The thread at the entrance of the lens, near the window, is only guesstimated, as I couldn't measure it properly without disassembly.
Dimensions of the knurling on the adjustment tube, as well as on the adapter are also guesstimates and may not faithfully represent the reality. Although their heights and diameters should be correct.