410 models
Um mit einem 100X ZOOM C Mount Objektiv durch ein Selfie Ring Light für Telefon (small) eine gute Ausleuchtung zu erhalten braucht ich einen Adapter der das Licht auf einer bestimmten Höhe am Objektiv fixiert. Der Adapter wird durch die…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
Layer - 0.2-0.3mm Walls - 2 Infill - 15% No support !
Basically prints without support and brim, but I'd recommend a 5-10mm brim (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or…
Block: Preferably 40% infill, though 10% is sufficient. Wedge: 10% infill. Bolt: 10%–25% infill. PLA will work, but PETG is recommended as it provides more flexibility in the bolt for tightening. Added Second Options on the Tightening…
Someone needed the original container with an adapter for the great HSW , so I added some with my rather limited modelling knowledge ;-) Added models with the HSW attachments in the middle or at the top by request. I have not printed…
I needed a new calibration print to dial in my stepper motor to achieve great dimensional accuracy at a larger scale than just a simple 20x20x20 cube. Was looking and found this from Collect3D on thingiverse. Remixed it to have larger…
9mm Rugged Ammo Box Collection (50x, 100x, 150x, 225x, 396x) This is a remix of the Rugged Parametric Box by Whity, adapted for 9mm ammunition storage. This version integrates a removable ammo tray and includes all source files for…
Are you feeling overwhelmed by your monitor taking up too much space on your desk? It's time to take a stand and reclaim your workspace with this French cleat, low profile monitor wall mount. This mount is designed to be both strong and…
Box for hepa filter and activated carbon pellets for the Creality K2 The K2 Plus already has a carbon filter installed, but it is only partially filled. I also wanted to have a hepa filter on the housing and came up with this design.…
A simple monitor holder for Ikea Skadis. Suitable for Vesa 100x100. Separate the model into two parts in the slicer and turn the two parts to the side of the hooks. so no support structure is necessary. I recommend at least PETG! Eine…
1st layer test by 0.2 layer height
Just a 100mm x 100mm x .2mm for 1st layer check
Simple low profile wall mount for 100x100mm and 75x75mm VESA monitors. I used it to mount my 34" ultrawide and it worked like a charm. Because of the low profile, 4 screws and angled dovetail it's very easy to install and very strong. Use…
This mount was designed based on the model by @DaveWoodX . If the actual computer's dimensions differ upon arrival, I will update the design accordingly. Update: Added v1.5 to add strength to the fingers that hold the mini into the mount.…
Transform your ultra-portable Arzopa Z1FC 16.1" 144Hz gaming monitor into a permanent workstation setup! This custom 3D-printed adapter adds standard VESA 100x100mm compatibility , letting you mount it on walls, arms, or stands for…
A handy holder for TVs or monitors that allows rotation and tilting. Suitable for your office, workshop or public areas for information monitors. This holder is sturdy even if you print it with PLA (also in my case) and comes with VESA…
I designed this simple monitor mount to use for a 24 inch 100x100mm compatible monitor. Material needed: This mount needs 27-28mm wooden roundstock found in hardware stores. Cut to length to determine the height of the monitor. Keep in…
Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 12 platform_width = 100…
Self-watering planter designed for my carnivorous plants. You can customize dimensions in Fusion 360 using "Modify->Change Parameters".
Customized version of https://www.thingiverse.com/thing:82533 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=82533 Print instructions Category: 3D Printing Tests Instructions Using the following…
honeycomb basket for heavy items
A small, metric woodworking square. Print in whatever material you like, using any infill amount you like.
We have needed some waterproof boxes to install some cables in it. as the shipping time was too long I've decided to print them with 3D printer. First 2 boxes were printed with PLA, should be waterproof. Another attempt will be made with…
Drawer Organizer for IKEA PAX Komplement 100x58 Enhance the functionality of your IKEA PAX Komplement 100x58 drawer with this customized organizer. Designed as a remix of the original "Parametric boxes for drawer" Fusion 360 file, it…
Caixa Organizadora 3D Baixe e imprima este arquivo para criar sua própria caixa organizadora personalizada! Ideal para armazenar pequenos objetos, esta caixa é prática e fácil de montar. Perfeita para organizar seu escritório, quarto, ou…
Vents are expensive so i thought maybe i could print it myself. I came up with this model after printing few variants and fixing mistakes. You can put it on doors, printer enclosures, dehydrators, pretty much anywhere where you need…
Print this out, measure with calipers after it has cooled down to room temp, adjust esteps based on that. X and Y corners are rounded so if you don't have pressure advance on, it won't mess up your measurements
This adapter converts the S100x8 thread to a smaller G2 (2") piping thread. Handy for connecting bigger hoses. Made in Fusion 360. You should place a rubber ring / seal on the end of the S100x8 thread. Print in the provided orientation,…
Es ist eine einfache, kleine Kiste.
Hexagonal junction box with plain screwed lid - Cassetta di derivazione esagonale con coperchio basso a vite External dimensions - Dimensioni Esterne 112x100x50mm Surface-mounting enclosure Suitable for: Resize to adjust dimension All our…
Simple remix of the original Vesa flat mount but with a 100x100 spacing Print instructions Print flat on whichever side, recommend at least 3 perimeters.
Basically prints without support and brim, but I'd recommend a 5mm brim and organic support for the locking interface (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality…
Changelog: 2023.04.07: Fixed scaling problem.
Sturdy VESA 100x100 Adapter to enable wall- or tablemounting for the MSI Optix MAG341CQ (German/ European Version, so check your monitors interface before printing, MSI seems to have at least one other version distributed in North…
Modified the original by cutting the model and moving it so the mounting holes are at 100x100mm spacing. Then extruded the cut sections back so that the original mount still works the same as it used to.
My stackable ammo box just bigger
This is my monitor stand, which I built for an old monitor of mine, because I didnt just wanted to buy one from Amazon . The finished thing should weigh around 500g.. I think (I forgot to weigh it before I mounted the monitor on and now…
created this Box for a Garage door opener using an ESP D1 Mini Controller and a Relayboard. Stepfile is included to make your own Version. Layer Height: 0,2mm Infill: 30% Material: PLA M3 Heat inserts used for mounting the Boards and the…
The purchasable version is overpriced and also from 3D printing. So I have drawn my better variant. Just use the sheet metal and the original screws, they fit perfectly! Printed from PETG. Category: Office
You can use this mount on the Ikea Bekant sit/stand electric desk . Print the 5 parts (Generic print outside part twice). There is a version for a generic square PC casing and one that is adapted to the MSI Creator P100X 11. Also you will…
Filament leftovers trash / recycle bin (approx. 100x100x200mm). Have fun to print ;)
I found the VESA adapter from Uhrensohn brilliant, but for my monitor, which I really wanted to attach near the wall, the adapter is pretty thick. Also I noticed that the original cutout for the panhead screw was not deep enogh to fit my…
VESA mount for 3" T-slot slatwall systems, such as NewAge slatwall system, or Gladiator slatwall system. Print standing upright/vertically with no supports using PETG. Attach your display to the VESA mount with 4 M4 screws, then hang the…
This is one of the models that I designed and printed out on our SLS Machine for fun. It is not optimized for FDM. I might eventually do it in the future. It is 100 x 100 mm with interlinked single elements. I have attached some images of…
If you print one of these, I would be glad if you post the print here :D.
100x100x50 mm / 4mm dick, gedruckt mit 0,2mm Schichthöhe / 4 Wänden / 25% Füllung
See my newer model for a remix of this in a complete project: https://www.printables.com/model/400720-diy-monitor-pipe-clamp-mount This is a mount made for a Dell monitor but should work with any VESA 100x100 monitor. It will attach it to…
Für IBC Container ein Adapter von 100x8 auf 60X6
This is an adapter to mount a TV with a 200mmx150mm VESA hole pattern to a mount with 100mmx100mm or 75mmx75mm pattern. I bought a small 32" TV for my office, and also got a cheap wall mount that said it supported 32" TVs, however the…
Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 10 platform_width = 100…
VESA 100x100 adapter for Iiyama 200x100 (6 screws). Print without supports, there are thin layers above hexagonal head to puncture/drill after printing. Part list: about 120g of PET-G 6x M4x20 6x M4 washer 4x M5x20-30 screw with hexagonal…
Adapter for emptying and cleaning IBC containers. IBC cap with S100x8 thread and HT 75mm connection.
Printed with PLA,PETG, ABS, ASA, ASA275 at 0.3 or 0.2mm layer height, 30% infill with supports.
A square pattern for testing a first layer bed scan
English: I found this thing: https://www.thingiverse.com/thing:1962611 to mount my 24"-screen to the wall. since the case of my screen seams to be not the stiffest one, and the parts had a little bit loose fit, the screen leaned forward…
Printed on Anycubic VYPER. Wall tickness 2mm. Layer print 3mm. CURA settings on attached pictures. Printer calibrated and firmware updated with ZOMBIE_VYPER from YT.
Adapter to mount a Samsung LS24D-Series Monitor on a standard VESA 100x100 mount. Print the Base, the Pin and the Shell separately and use a threaded insert in the base. Fit the Shell around the Pin and screw the Pin onto the base. Some…
A simple bracket to hang a mini pc on a tv stand
Einfacher Winkel, die Maße findet ihr in der Zeichnung. Simple angle, you can find the dimensions in the drawing.
just a simple wall mount for an hp mini PC. NEED: 4x - M4x10mm buttonheads 2x - 2.5" drywall screws You'll need four M4x10mm button head machine screws to attach it to the back of your PC. I have included some screw caps for the heads, so…
This model is an adapter from Vesa 100x100 to 200x200 , i used it to mount a tv on a Vesa 100. This model uses additional parts: 4x M4 Screws. 4x M4 threaded inserts (6mm diameter, 6mm length). I don't raccomend using this adapter for tvs…
Este gabinete de 100x50x50 mm ha sido diseñado específicamente para proyectos electrónicos que requieran una carcasa compacta, funcional y fácil de imprimir. El modelo está optimizado para impresión sin soportes al colocarlo con la base…
A 24mm high spacer to fit into the Dell S3222HG monitor's recessed VESA mount so that larger VESA plates/rails can be used. Its overall dimensions are 121 x 121 x 24mm. Make sure to use the appropriate length screws to prevent damaging…
100x100 square saucer Square flower pot: https://www.printables.com/pl/model/165712-100x100x90-square-flower-pot
I didn't find a simple 100x100mm silica box, that i can print on my Voron 0.2, so i decided to do a quick simple one with heat set inserts an a screwed lid. The big box fits around 320g of Silica beads (See pictures). The small box fits…
Hamster Tunnel Category: Pets
Giant novelty bolt and nut for your shelf. 100mm across 250mm high. Or scale as you see fit. After running the nut over the bolt a lot, the action becomes quite smooth.
A 50 gram 10x10x1.5 cm waffle with 36 holes. Takes 3 hours to print on ender 3. Print settings no supports
Was sick of the non-adjustable stand so I bought a VESA mount for my monitor but adapters were around $30 on amazon so decided to make my own. The VESA adapter is designed for the MSI optic G24C however may work for other monitors.…
Pretty stable, I hope at least. Use one M6 x 50mm allen screw to attach. Cross is attached with M4 x 10mm
I had a Dell P2217H monitor that broke, so I bought a new monitor, the SE2222H from Dell as well. The stand of the old monitor was much superior to the new one, so I decided to swap them, and to my surprise, I realized they were not…
Now available on Etsy complete with free shipping and embedded threaded inserts. This accessory rail mounts to the back of your VESA-compatible monitor or arm. It has place for two ¼" threaded inserts and one GoPro accessory mount. I used…
Trying to make a case for my new needle files. I am looking to design the case to be simple, reliable, and compact, with a see-through lid and easy access to the files. Not a big fan of including a hinge, I've done something similar, the…
Customized version of https://www.thingiverse.com/thing:2404850 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2404850 Print Settings Printer: JGAurora A5 Rafts: No Supports: No Resolution: 0.2 Filament:…
Three different diameter plugs for the motorcycle frame: 44mm plug (2 needed) 38mm plug 33.5mm plug I printed these in PLA and find they fit my frame holes perfectly. They're sized to press in quite tight to a 10mm depth and have a slight…
Not sure if this zero clearance insert will fit other model Bosch table saws or not. Need one Part 1 and one Part 2. Have 2 variations of part 2 depending on if using the riving knife or not. Uses 2 M3 x 5 screws to secure both pieces…
This is a reference model of Waveshare's 100X Industrial Microscope Lens for Raspberry Pi HQ Camera. It is based on my own manual measurements. I am hopeful that someone will find it useful for creating their project. DISCLAIMERS: The…
I needed a model to hang my Elitedesk on the wall but didn't want to attach it permanently since i'm going to mount it in a tight closet. This way i can just slide it out if i ever need to plug something in. The standoffs need to be cut…
For print use settings and tips from original model description. Other files are also avalible here. https://www.printables.com/en/model/447758-vesa-100x100-low-profile-french-cleat-wall-mount
Questa scatola porta minuterie, ispirata al rinomato marchio Parkside, è stata realizzata con cura mediante stampa 3D, garantendo un design robusto e funzionale. Ideale per organizzare viti, bulloni, chiodi e piccoli attrezzi, la scatola…
To make covers for diaries, notebooks, mini keychains. Templates to avoid having to measure more and improve production times. 3D printing settings Layer height:0.2mm Printing speed: 40mm/s Filling:5% Wall lines:3 Supports: not required
I was tired of always having to remix drawer divider/separator models so I decided to design a simple scalable divider that prints easy and fits together perfectly and can scale to whatever dimension you like within the slicer. The result…
Simple counter of 100x 1-eur coins. It has 10 cilinder holes that can be filled with 10 coins each. Just fill the holes with coins and you will be sure of having 100x coins. Settings: PLA; 0.2mm, 5%infill giroid; no rafts, no supports
Adapter to allow multi-size VESA mounts to attach to 100x100 M4 VESA monitor Dell monitors(and others) have recessed VESA mounting holes, if you don't use spacers a large flat universal mounts will put pressure on the monitor case and…
Flutebox is a desk organization system with a relaxed design with rounded flutes. A rectangular assortment tray 100x200 mm for pens, small tools and other knick knacks you need handy on your desk. Prints well in PLA, you can go low on…
Self standing photo frame, vertical or horizontal. Easy to print without supports. Material PLA or PETG. Printing time 26 minutes, filament 7.37g
Added arc holes for monitor adjustment
as I mentioned in the summary, I love everything about the original design except the dowel hole on the clamp + foot models is a slightly awkward size to fit a standard imperial-size dowel, so I added about 0.2mm to the radius of each of…
Endkappe für den Tehalit / Hager Brüstungskanal 100x70mm M4x10 Schraube und Beilagscheibe wird zum Festklemmen im Kanal benötigt.
I've made simple intel nuc 5 vesa 75x75 and vesa 100x100 mount.
Remix from https://www.thingiverse.com/thing:2813041 Side lengths are 100mm Thickness is 10x10x10mm To be printed in given orientation to align X and Y axis With recessed corners for better measuring of the perpendicularity
This is a 3D-printed adapter for the property VESA Mount for the HP OMEN x25f and x35c. The through holes are for M4x40mm bolts.
E-step calibration 100x100x50 Calibration for x y z Axis 100x100x50 Printer : Flsun V400 layer height : 0,2 line width : 0,4 no support ; infill 20% ; print time ~ 1 h Sunlu PLA Silk Gold MakerWorld : https://makerworld.com/en/@sweb3791…
