VESA 100x100 Mount for Vertically Oriented 3/4 Iron Pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount made for a VESA 100x100 monitor that will attach it to a 3/4 iron pipe oriented vertically.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 203
- Makes
- 1
- Views
- 1,335
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
See my newer model for a remix of this in a complete project:
https://www.printables.com/model/400720-diy-monitor-pipe-clamp-mount
This is a mount made for a Dell monitor but should work with any VESA 100x100 monitor. It will attach it to a 3/4 iron pipe oriented veritcally. The VESA mount uses M5 size screws to secure it to the monitor. A 1 inch M8 bolt, 2 fender washers, and 1 nuts are used to attach the pipe clamp to the mount. The pipe clamp is secured to the pipe using two 1 inch m5 bolts and nuts (shorter may also work). The holes do not have clearance built in so force will be required to drive the bolts through.
Print Settings:
- Material: PETG
- Infill: 50%
- Walls: 5
- Top and Bottom Layers: 4
Summary of hardware required:
- 4 x M5 bolts sized for your monitor
- 1 x 25mm long M8 bolt
- 2 x M8 washers
- 1 x M8 nut
- 2 x 25mm inch long M5 bolts
- 2 x M5 nuts